User manual

Custom Picture Settings
142
Protecting Custom Picture Files
Protecting a custom picture file prevents its settings from being
accidentally changed.
1 Select a custom picture file (A 139).
2 Open the [Protect] submenu.
[/ Custom Picture] > [File] > [Protect]
3 Select [Protect] and then press SET.
• In the custom picture file selection screen, i will appear next to the file name.
• To remove protection settings, select [Unprotect] instead.
Copying Custom Picture Files
You can transfer custom picture files between the camera and SD card.
Copying a File from the Camera to an SD Card
1 Select a custom picture file (A 139).
2 Open the [Copy to 8] submenu.
[/ Custom Picture] > [File] > [Transfer] > [Copy to 8]
3 Select the destination file and then press SET.
• Select an existing custom picture file to overwrite it or, if this option is
available, select [New File] to save the settings as a new custom picture file on the SD card.
4 Select [OK] and then press SET.
• The file on the SD card will be overwritten or a new file will be created on the SD card.
5 When the confirmation message appears, press SET.
Replacing a File in the Camera with a File on an SD Card
1 Select the custom picture file that you wish to replace (A 139).
2 Open the [Load from 8] submenu.
[/ Custom Picture] > [File] > [Transfer] > [Load from 8]
3 Select the file with the settings that you want to replicate and then press SET.
4 Select [OK] and then press SET.
• The file in the camera will be overwritten by the one on the SD card.
5 When the confirmation message appears, press SET.
NOTES
• You can also copy to the camera a custom picture file embedded in a clip (A 163).
[/ Custom Picture]
[File]
[Protect]
[/ Custom Picture]
[File]
[Transfer]
[Copy to 8],
[Load from 8]