User manual

145

Custom Picture Settings

[Other Settings] > [Black] > [Master Black Red], [Master Black Green], [Master Black Blue]

These settings correct the color cast in blacks. When [Gamma] is set to one of the Canon Log settings, these

settings have no effect on the picture. Each setting can be adjusted from –50 to +50. (Default: ±0)

[Other Settings] > [Black Gamma]

Controls the lower part of the gamma curve (dark areas of the image). When [Gamma] is set to one of the Canon

Log settings or [Wide DR], this setting has no effect on the picture.

[Level]: Raises or lowers the lower part of the gamma curve. This setting can be adjusted from –50 to

50. (Default: ±0)

[Range]: Selects the adjustment range from the selected [Point]. This setting can be adjusted from –20 to

50. (Default: ±0)

[Point]: Determines the shape of the lower part of the gamma curve. This setting can be adjusted from

–20 to 50. (Default: ±0)

[Other Settings] > [Low Key Satur.]

Adjusts color saturation in dark areas.

[Activate]: Activates/deactivates the setting. (Default: [Off])

[Level]: Specifies how saturated colors are in dark areas. This setting can be adjusted from –50 to 50.

(Default: ±0)

[Other Settings] > [Knee]

Controls the upper part of the gamma curve (highlights of the image). By compressing the highlights, you can

prevent parts of the image from being overexposed. When [Gamma] is set to one of the Canon Log settings,

[Wide DR] or [EOS Standard], this setting has no effect on the picture.

[Activate]: Activates/deactivates the setting. (Default: [On])

[Slope]: Determines the slope of the gamma curve above the knee point. This setting can be adjusted

from –35 to 50. (Default: ±0)

[Point]: Sets the knee point of the gamma curve. This setting can be adjusted from 50 to 109. (Default: 95)

[Saturation]: Adjusts color saturation in highlights. This setting can be adjusted from –10 to 10. (Default: ±0)

Point

Range

Level

Input

Output

Black Gamma