User manual

147
Custom Picture Settings
[Other Settings] > [Noise Reduction]
Reduces the amount of noise that appears in the image. Select a level from [Off] (lowest level) to [12] (highest
level), or select [–1] to turn the noise reduction off. (Default: [Off])
Note that even when this setting is set to [Off], a very low level of NR filter is applied. Select [–1] to completely
turn off the NR filter.
[Other Settings] > [Skin Detail]
The camera applies a softening filter to areas in the picture with skin tones to give a more pleasant appearance.
By changing these settings, you can determine what areas will be detected as skin tones. A zebra pattern will
appear on the LCD screen or a monitor connected to the MON. terminal over areas of the image that are
detected as having skin tones.
[Effect Level]: Adjusts the level of the filter. The available options are [Off], [Low], [Middle] and [High].
(Default: [Off])
[Hue]: Adjusts the hue for detection of skin tones. This setting can be adjusted from –16 to 16.
(Default: ±0)
[Chroma]: Adjusts the color saturation for detection of skin tones. This setting can be adjusted from 0 to 31.
(Default: 16)
[Area]: Adjusts the color range for detection of skin tones. This setting can be adjusted from 0 to 31.
(Default: 16)
[Y Level]: Adjusts the brightness for detection of skin tones. This setting can be adjusted from 0 to 31.
(Default: 16)
[Other Settings] > [Selective NR]
The camera detects the characteristics of a certain color or tone and applies a noise reduction filter to the
targeted areas. A zebra pattern will appear over targeted areas on the LCD screen or a monitor connected to the
MON. terminal.
[Effect Level]: Adjusts the level of the noise reduction filter. The available options are [Off], [Low], [Middle] and
[High]. (Default: [Off])
[Hue]: Adjusts the hue for the color to be detected. This setting can be adjusted from 0 to 31.
(Default: 0)
[Chroma]: Adjusts the color saturation for the color to be detected. This setting can be adjusted from 0 to
31. (Default: 16)
[Area]: Adjusts the color range for the color to be detected. This setting can be adjusted from 0 to 31.
(Default: 16)
[Y Level]: Adjusts the brightness for the color to be detected. This setting can be adjusted from 0 to 31.
(Default: 16)
[Other Settings] > [Color Matrix Tuning]
Adjust in detail various aspects of the color matrix to affect the color tones of the whole image.
[Gain]: Adjusts the color intensity. This setting can be adjusted from –50 to 50. (Default: ±0)
[Phase]: Adjusts the color phase. This setting can be adjusted from –18 to 18. (Default: ±0)
[R-G]: The R-G matrix changes the tint of the picture along the cyan/green and red/magenta
gradations. This setting can be adjusted from –50 to 50. (Default: ±0)
[R-B]: The R-B matrix changes the tint of the picture along the cyan/blue and red/yellow gradations.
This setting can be adjusted from –50 to 50. (Default: ±0)
[G-R]: The G-R matrix changes the tint of the picture along the magenta/red and green/cyan
gradations. This setting can be adjusted from –50 to 50. (Default: ±0)
[G-B]: The G-B matrix changes the tint of the picture along the magenta/blue and green/yellow
gradations. This setting can be adjusted from –50 to 50. (Default: ±0)
[B-R]: The B-R matrix changes the tint of the picture along the yellow/red and blue/cyan gradations.
This setting can be adjusted from –50 to 50. (Default: ±0)
[B-G]: The B-G matrix changes the tint of the picture along the yellow/green and blue/magenta
gradations. This setting can be adjusted from –50 to 50. (Default: ±0)