User manual

149
Customizing Functions and Onscreen Displays
Customizing Functions and Onscreen Displays
Customize the camera to match your shooting style and needs. Use the [ System Setup] > [Custom
Function] settings to adjust how some of the camera’s controls and functions operate. Similarly, use the
[¢ Picture/Terminals Setup] > [Custom Display 1] or [Custom Display 2] settings to customize the onscreen
displays that appear during recording.
Customizing Functions
The following table describes which functions can be customized using
[Custom Function].
* Only [SELECT Dial Dir.] can be changed in this mode.
1 Open the [Custom Function] submenu.
[System Setup] > [Custom Function]
2 Select the desired function.
3 Change the setting option and then press SET.
Customizable functions with [Custom Function]
* Available only when the optional LM-V1 LCD Monitor is attached to the camera.
Operating modes:
Menu item Description
[Camera Control Dial] Selects the function of the control dial on the camera.
[Grip Control Dial] Selects the function of the control dial on the grip unit.
[Camera Control Dial Dir.] Changes the direction of the adjustment when operating the control dial on the camera.
[Grip Control Dial Dir.] Changes the direction of the adjustment when operating the control dial on the grip unit.
[SELECT Dial Dir.] >
[Camera], [EVF-V70]
Changes the direction of the adjustment when operating the SELECT dial on the camera or on an optional EVF-V70
connected to the camera.
[Retract Lens]
When one of the following lenses is attached to the camera and the focus mode switch on the lens is set to AF, if
this setting is set to [On], the lens will retract fully when the camera is turned off.
• EF 40mm f/2.8 STM • EF-S 24mm f/2.8 STM • EF 50mm f/1.8 STM
[3D Rec Mode]
When using another C300 Mark II camera to shoot in 3D, this function corrects any lags in the video and audio
signals output from the REC OUT terminal or MON. terminal.
[Scan Reverse Rec] Inverts the recorded image horizontally and/or vertically.
[Displayed Units] Changes the distance units used in camera displays between meters and feet.
[OSD Recording (CFast)]
Selects the onscreen displays (date, time, time code, or a combination of them) that will be recorded with primary
clips on the CFast card exactly as they appear on the screen. Onscreen displays will not be recorded during slow &
fast motion recording mode.
[START/STOP Button] >
[Camera], [Grip], [Monitor]
Independently enables or disables the use of individual START/STOP buttons.
[Key Lock]
Selects whether to lock all buttons (including START/STOP buttons) or all buttons with the exception of currently
enabled START/STOP buttons) (A 57).
[Touch Screen Response]* Selects the responsiveness of the optional LM-V1 LCD Monitor's touch screen to touch input.
[System Setup]
[Custom Function]
*