User manual

Playback
156
Onscreen Displays
1
Only when [¢ Picture/Terminals Setup] > [Custom Display] > [Camera Data] is set to [On].
2
Only when [¢ Picture/Terminals Setup] > [Custom Display] > [Date/Time] is set to [On].
3
For clips recorded using slow & fast motion recording, the shooting frame rate and playback frame rate will both be displayed.
4
Only when [¢ Picture/Terminals Setup] > [Custom Display] > [Audio Level] is set to [On].
NOTES
• You can repeatedly press the DISP. button on the monitor unit or an assignable button set to [Display]
(A 135) to switch the onscreen displays in the following sequence.
Show all onscreen displays  hide the joystick guide  hide all onscreen displays*
* Except for momentary displays like the clip number when the playback switches to a different clip, or the time code and playback
operation at the end of the playback.
8 9 10 11 12
15
16
19
20
21
22
1
2
3
5
7
17
4
6
18
1413
1 Remaining battery time (A 58)
2 Fan operation (A 63)
3 Joystick guide (A 157)
4 Shutter speed
1
(A 67)
5Aperture value
1
(A 72)
6 ISO Speed/Gain
1
(A 69)
7 Recording date and time
2
8 Recording media
, Primary clips: CFast card
8 Proxy clips: SD card
9 Playback operation
10 Frame rate
3
(A 64)
11 Onscreen displays superimposed on video output
(A 174)
12 Embedded custom picture file (A 139)
13 Relay recording
14 $ mark/% mark (A 109, 160)
15 Time code (A 92)
16 Clip number / Total number of clips
17 Color sampling (A 64)
18 Resolution (A 64)
19 User bit (A 95)
20 Audio output channel (A 175)
21 Audio level meter
4
22 Headphones volume (only while adjusting the
volume)
7 Playback operation
* The playback speed (x5, x15 or x60) will also appear in the indicator.
9 Relay recording
Appears when a clip begins on one CFast card and continues uninterrupted on the other. 5 indicates the
first part of the recording, 6 indicates the middle part(s) and 7 indicates the last part.
Ð PLAY Playback
Ý PAUSE Playback pause
Ô/Ó Frame reverse/Frame advance
F FWD × Fast playback*
Ø F REV Fast reverse playback*