User manual

Clip Operations
162
Deleting Clips
You can delete clips from a CFast or SD card, except for primary clips with an $ mark. To delete such clips,
delete the $ mark beforehand (A 161).
Deleting a Single Clip
1 Select the desired clip and then press SET to open the clip menu.
2 Select [Delete Clip] and then press SET.
• The clip information screen appears and it prompts you to confirm the operation.
3 Select [OK] and then press SET.
• Select [Cancel] instead to cancel the operation.
• While the clip is being deleted, the operation cannot be canceled.
4 When the confirmation message appears, press SET.
Deleting All Clips
1 Open the [Delete All Clips] submenu.
[3 Recording/Media Setup] > [Clips] > [Delete All Clips]
2 Select [OK] and then press SET.
• All the clips on the selected CFast card (except for primary clips with
an $ mark) or SD card will be deleted.
• Select [Cancel] instead to cancel the operation.
• While the clips are being deleted, you can press SET to cancel.
3 When the confirmation message appears, press SET.
Deleting the User Memo and GPS Information
1 Open the clip index screen for primary clips, select the desired clip and then press SET to open the
clip menu.
2 Select [Delete User Memo] and then press SET.
• The [Delete User Memo] screen appears and it prompts you to confirm the operation.
3 Select [OK] and then press SET.
• The user memo and GPS information is deleted and the screen changes back to the clip index screen.
• Select [Cancel] instead to cancel the operation.
[3 Recording/Media Setup]
[Clips]
[Delete All Clips]