User manual

7
179
Photos
Taking Photos
You can take photos when the camera is in mode or you can grab still frames from a clip and save them
as JPEG images when the camera is in mode. Photos and still frames are saved onto the SD card and
their size depends on the video configuration currently in use.
Taking Photos in CAMERA Mode
To take a photo, set an assignable button to [Photo] in advance.
1 Set an assignable button to [Photo] (A 135).
2 When the camera is in record standby mode, press the assignable button to take a photo.
• 8 and the number of available photos appear on the upper right of the screen.
• The SD card access indicator will illuminate in red as the photo is being recorded.
NOTES
• Photos cannot be taken during pre-recording mode.
Grabbing Still Frames in MEDIA Mode
To grab still frames from a clip, set an assignable button to [Photo] in advance.
1 Set an assignable button to [Photo] (A 135).
2 Select the desired clip and press the Ò button to start playback.
3 Pause the playback at the frame you want to grab and save as an image file.
4 Press the assignable button to grab the still frame.
• 8 and the number of available photos appear on the upper right of the screen.
• The SD card access indicator will illuminate in red as the still frame is being recorded.
5 Press the Ñ button to stop playback.
Resolution currently in use/Resolution of the clip being played back Photo/Still frame size Approximate file size per image
4096x2160, 2048x1080 2048x1080 930 KB
3840x2160, 1920x1080 1920x1080 880 KB
Operating modes:
Operating modes: