User manual
189
Menu Options
[Rec Command] ( mode only): When you connect the camera to an external recorder, if you start or stop
recording with the camera, the other device will also start or stop recording.
• To output the recording command from the HDMI OUT terminal, you need to set both [Rec Command] to [On]
and also [3 Recording/Media Setup] > [HDMI Time Code] to [On] to output simultaneously the time code
and recording command.
[¢ Picture/Terminals Setup] menu
Menu item Submenu Setting options A
[Select Monitoring Devices] [MON.+HDMI+LCD(VF)], [MON.+HDMI+VF], [LCD+VF] –
mode:
[MON. Terminal]
mode:
[REC OUT/MON. Terminal]
[Output] mode:
[4K RAW Priority], [2048x1080/1920x1080], [1920x1080], [Off]
mode:
[2048x1080/1920x1080], [1920x1080], [Off]
170
[OSD Output (2K)] [On], [Off] 174
[3G-SDI Mapping] [Level A], [Level B] 170
[GENLOCK/SYNC OUT Term.] [Select] [HD Sync Output], [Genlock Input] 97,
99
[Genlock Adjustment] –1023 to +1023 (000), [Set] 97
[SYNC Scan Mode] [P], [PsF] 99
[Time Code] [Mode] [Preset], [Regen.] 92
[Run] [Rec Run], [Free Run] 92
[DF/NDF] [DF], [NDF] 93
[Setting] [00:00:00:00] to [23:59:59:29] (for 59.94 Hz recordings) or [23:59:59:24]
(for 50.00 Hz recordings), [Set], [Reset]
93
[TC In/Out] [In], [Out] 97,
99
[User Bit] [Recording Mode] [Internal], [External] 98
[Type] [Setting], [Time], [Date] 95
[LCD Setup] [Brightness] -99 to 99 (±0)
43
[Contrast] -99 to 99 (±0)
[Color] -20 to 20 (±0)
[Sharpness] 1 to 4 (2)
[Backlight] [Normal], [+1], [+2]
[Viewfinder Setup],
[EVF-V70 Setup]*
[Brightness] -99 to 99 (±0)
43
[Contrast] -99 to 99 (±0)
[Color] -20 to 20 (±0)
[Sharpness] 1 to 4 (2)
[Luminance] [Normal], [High]
[Eye Sensor] [On], [Off] –
[LCD LM-V1 Setup]** [Brightness] -99 to 99 (±0)
43
[Contrast] -99 to 99 (±0)
[Color] -20 to 20 (±0)
[Sharpness] 1 to 4 (2)
[Luminance] [Normal], [+1], [+2]
[Panel Luminance] 1 to 5 (3) –
[DISP. Button Levels] [All Displays] [On], [Off]
60
[Surrounding Icons] [On], [Off]
[Markers] [On], [Off]
[No Displays] [On], [Off]