User manual

Specifications
218
•ND Filter: Built-in (Off, 2, 4, 6, 8
5
or 10
5
stops), motor operated
5
With extended ND range.
•Exposure: AE shift, light metering modes (standard, spotlight, backlight)
• White Balance
Custom white balance (two sets, A and B); color temperature setting (2,000 K to 15,000 K); two preset
settings (daylight, 5,400 K
7
and incandescent lamp, 3,200 K
7
) that can be further fine-tuned
7
Color temperatures are approximate and given for reference purposes only.
• Focus
Manual focus, autofocus (one-shot AF, AF-boosted MF, continuous AF, Face AF); face detection and subject
tracking available
AF type: Dual Pixel CMOS AF, contrast-detection AF
• Sensor Sensitivity (ISO 800, 2000 lux, 89.9% reflection)
59.94 Hz: F10 (2048x1080 at 59.94P); 50.00 Hz: F11 (2048x1080 at 50.00P)
• S/N Ratio (ISO 800, using Canon Log 2 gamma)
67 dB (typical, 1920x1080, at 29.97P (59.94 Hz) or 25.00P (50.00 Hz))
• Subject Illumination (ISO 25600, with a f/1.2 lens, 100% output)
59.94 Hz: 0.45 lux (shutter speed 1/30)
50.00 Hz: 0.38 lux (shutter speed 1/25)
• Built-in microphone: Monaural electric condenser microphone
• Size of Photos: 2048x1080, 1920x1080
Terminals
• REC OUT Terminal / MON. Terminal
BNC jack, output only, 0.8 Vp-p / 75 Ω, unbalanced
3G-SDI: SMPTE 424, SMPTE 425, SMPTE ST 299-2
HD-SDI: SMPTE 292, SMPTE ST 299-1
Embedded audio, time code (VITC/LTC)
LUT (BT.709, BT.2020, DCI, ACESproxy), color space for 4K RAW output (BT.2020, Cinema Gamut), and
supplemental displays* (superimposed onscreen displays, peaking, zebra pattern, magnification, B&W image,
waveform monitor) can also be output.
* MON. terminal only.
• HDMI OUT Terminal
HDMI connector, output only
Time code, LUT (BT.709, BT.2020, DCI, ACESproxy) and supplemental displays (superimposed onscreen
displays, peaking, zebra pattern, magnification, B&W image, waveform monitor) can also be output.
•MIC Terminal
∅ 3.5 mm stereo mini-jack, -72 dBV (manual volume center, full scale -18 dB) / 5.6 kΩ
Microphone attenuator: 20 dB
• × (Headphone) Terminal
∅ 3.5 mm stereo mini-jack, -G to -8 dBV (16 Ω load, volume range Min to Max) / 50 Ω or less
• GENLOCK/SYNC OUT Terminal
BNC jack, 1 Vp-p / 75 Ω
GENLOCK setting: input only; SYNC OUT setting: output only, tri-level HD signal
• TIME CODE Terminal
BNC jack, input/output
Input setting: 0.5 Vp-p to 18 Vp-p / 100 kΩ; Output setting: 1.3 Vp-p / 50 Ω or less
• REMOTE Terminal
∅ 2.5 mm stereo mini-jack