User manual

Preparing the Camera

Using the LCD Panel

The whole monitor unit can be rotated 270º sideways allowing for

easy monitoring and operation from the side of the camera.

Additionally, the independently articulated LCD panel can be

rotated 180º sideways and 270º up and down. In combination, you

can position the LCD panel at a comfortable angle whatever the

shooting style you need.

1 Rotate the monitor unit sideways to the desired angle.

2 Open the LCD panel and adjust the screen to the desired

position.

Adjusting the LCD Panel for Shoulder Mounted Use

1 Open the LCD panel 90º until it is perpendicular to the monitor

unit.

2 Rotate the LCD panel 180º left.

3 Rotate the LCD panel 180º forward.

4 Press the MIRROR button until the image is displayed in the

correct orientation.

• Repeatedly pressing the MIRROR button will change the

displayed image in the following order: Image inverted

horizontally  Image inverted vertically  Image inverted

horizontally and vertically  Original image.

NOTES

• Using the handle unit (A 45), you can attach the monitor unit in a number of different positions for maximum

flexibility by attaching it to the front, top or rear accessory shoe.

• When you use a commercially available lens adapter and the image on the screen is inverted, you can use the

[System Setup] > [Custom Function] > [Scan Reverse Rec] setting (A 149) to return the image to the

correct orientation.

• You can turn off the LCD screen by setting [¢ Picture/Terminals Setup] > [Select Monitoring Devices] to an

option that does not include [LCD].

• About the LCD and viewfinder screens: The screens are produced using extremely high-precision manufacturing

techniques, with more than 99.99% of the pixels operating to specification. Very rarely, pixels may misfire or

may light up permanently as white dots. This has no effect on the recorded image and does not constitute a

malfunction.

햲

햳

햲

햳

햴

햵

You can use the viewfinder and watch

the LCD screen at the same time