User manual

Preparing the Camera

Adjusting the Viewfinder/LCD Screen

You can adjust the brightness, contrast, color, sharpness, and luminance

level of the viewfinder and LCD screen independently of each other. These

adjustments will not affect your recordings.

1 Open the setup menu for the viewfinder or LCD screen.

[¢ Picture/Terminals Setup] > [LCD Setup] or [Viewfinder Setup]

2 Select [Brightness], [Contrast], [Color], [Sharpness], [Backlight]* or

[Luminance]** and then press SET.

3 Select the desired level and then press SET.

• Repeat steps 2 and 3 to adjust other settings as necessary.

NOTES

• If you set an assignable button to [LCD Setup] or [Viewfinder Setup] (A 135), you can press the button to

open the respective submenu.

Setting the Screen to Black & White

The viewfinder and LCD screen display in color by default but you can set

them to black & white. Even when the screen is black & white, onscreen

text and icons will still be displayed in color.

1 Open the display selection menu for the viewfinder or LCD screen.

• [ Assistance Functions] > [B&W Image] > [Display on LCD] or

[Display on VF]

2 Select [On] and then press SET.

• You can also change the video output from the MON. and HDMI OUT terminals (together) to black & white.

• Repeat steps 1 and 2 as necessary to select other screens/video outputs.

3 Open the B&W image’s [Activate] submenu.

[ Assistance Functions] > [B&W Image] > [Activate]

4 Select [On] and then press SET.

Operating modes:

* [LCD Setup] only.

** [Viewfinder Setup] only.

[¢ Picture/Terminals Setup]

[LCD Setup]

[Viewfinder Setup]

[Brightness] ..... ±0

[Contrast] ….. ±0

[Color] ….. ±0

[Sharpness] ….. 2

[Backlight]* ..... [Normal]

[Luminance]** ….. [Normal]

[ Assistance Functions]

[B&W Image]

[Activate] ….. [Off]

[Display on LCD] ….. [On]

[Display on VF] ….. [On]