User manual

ISO Speed/Gain

Using the Control Dial

You can adjust the ISO speed or gain value using the control dial on

the camera or that on the grip unit.

You will need to set in advance the function of one of the control dials

to [ISO/Gain]. You can select the function assigned to each control

dial independently.

Assigning ISO Speed/Gain Control to a Control Dial

1 Open the [Camera Control Dial] (control dial on the camera) or [Grip

Control Dial] (control dial on the grip unit) submenu.

[ System Setup] > [Custom Function] > [Camera Control Dial]

or [Grip Control Dial]

2 Select [ISO/Gain] and then press SET.

Changing the ISO Speed or Gain Value

To select whether to change the ISO speed or the gain, perform the

previous procedure (A 69). Turn the control dial assigned to [ISO/

Gain] to set the desired ISO speed or gain value.

NOTESNOTES

• When high ISO speeds or gain levels are set, the picture may flicker slightly.

• When high ISO speeds or gain levels are set, bright red, green or blue dots may appear on the screen. In such

case, use a faster shutter speed (A 67) or select a lower ISO speed or gain value.

• When the ISO speed or gain level is changed, some noise may appear momentarily on the screen. Do not

adjust the ISO speed/gain level while recording.

• You can use the [ System Setup] > [Custom Function] > [Camera Control Dial Dir.] or [Grip Control Dial

Dir.] setting (A 149) to change the direction of the adjustment when you turn the control dial on the camera or

on the grip unit, respectively.

• When an optional RC-V100 Remote Controller is connected to the camera, you can adjust the ISO speed or

gain value with the remote controller’s ISO/GAIN Í/Î buttons.

Control dial

[ System Setup]

[Custom Function]

[Camera Control Dial]

[Grip Control Dial]

[Iris]