Operation Manual

101
Recording Audio
Activating the Microphone’s Attenuator
If the audio level is too high and the sound sounds distorted, activate the
microphone attenuator (20 dB).
1 Open the [MIC Att.] submenu.
[¡ Audio Setup] > [Audio Input] > [MIC Att.]
2 Select [On] and then press SET.
Monitoring the Audio with Headphones
Connect headphones with a ∅ 3.5 mm stereo mini-plug to the ×
(headphone) terminal to monitor the recorded audio.
NOTESNOTES
• You can adjust the headphone volume with the [¡ Audio Setup] >
[Audio Output] > [Headphone Volume] setting. If you set an assignable
button to [Headphones +] or [Headphones –] (A 131), you can press
the button to adjust the headphone volume without using the menu.
[¡ Audio Setup]
[Audio Input]
[MIC Att.]
[Off]
About the monaural microphone
The monaural microphone allows you to add comments while
shooting, which can be synchronized to the audio and video during
editing. The monaural microphone is available when neither the
supplied monitor unit nor the optional MA-400 Microphone Adapter is
connected to the camera.
NOTESNOTES
• The audio recording level of the monaural microphone cannot be
changed.
Monaural microphone
× (headphone)
terminal