Operation Manual

129
Browser Remote: Controlling the Camera via Wi-Fi
8 Status indicators
See the descriptions in the section about the [v] screen (A 121).
9 [ Activate] button
Touch/click the button to give priority to the metadata entered in this screen when recording clips. This
overrides the metadata read from a file saved on the SD card.
10 [Overwrite Previous] button/[Overwrite] button
While recording: Touch/click [Overwrite] to send the metadata entered in this screen to the camera, replacing
any metadata that the clip being recorded might have.
After recording a clip
: Touch/click [Overwrite Previous] to send the metadata entered in this screen to the
camera, replacing any metadata embedded in the last clip recorded.
11 [Apply from Next] button
Touch/click the button to send the metadata entered in this screen to the camera so it is embedded only with
clips that are recorded after the transfer. This option does not overwrite the metadata of clips already
recorded or being recorded.
NOTESNOTES
• The metadata sent to the camera from Browser Remote will be lost in the following cases.
- If the camera was turned off.
-If the [3 Recording/Media Setup] > [Metadata] > [Setting] setting was changed.
• Using Browser Remote ([ Activate] button), you can give priority to metadata sent from the application.
However, you cannot return the priority back to the SD card. To use a user memo file saved on the SD card
you will need to set [3 Recording/Media Setup] > [Metadata] > [Setting] to [SD Card] on the camera itself.
• Metadata sent to the camera from Browser Remote will not be added to relay clips recorded before the switch
to the current CFast card.