Operation Manual

Custom Picture Settings
140
[Other Settings] > [Low Key Satur.]
Adjusts color saturation in dark areas.
[Activate]: Activates/deactivates the setting. (Default: [Off])
[Level]: Specifies how saturated colors are in dark areas. This setting can be adjusted from –50 to 50.
(Default: ±0)
[Other Settings] > [Knee]
Controls the upper part of the gamma curve (highlights of the image). By compressing the highlights, you can
prevent parts of the image from being overexposed. When [Gamma] is set to [Canon Log 2], [Canon Log], [Wide
DR] or [EOS Standard], this setting has no effect on the picture.
[Activate]: Activates/deactivates the setting. (Default: [On])
[Slope]: Determines the slope of the gamma curve above the knee point. This setting can be adjusted
from –35 to 50. (Default: ±0)
[Point]: Sets the knee point of the gamma curve. This setting can be adjusted from 50 to 109. (Default: 95)
[Saturation]: Adjusts color saturation in highlights. This setting can be adjusted from –10 to 10. (Default: ±0)
[Other Settings] > [Sharpness]
Sets the sharpness of the output and recording signal.
[Level]: Sets the sharpness level. This setting can be adjusted from –10 to 50. (Default: ±0)
[H Detail Freq.]: Sets the center frequency of horizontal sharpness. Setting higher values increases the
frequency, which, in turn, increases the sharpness. This setting can be adjusted from –8 to 8.
(Default: ±0)
Point
Point
Range
Level
Level
Input
Output
Black Gamma
Input
Output
Input
Output
Slope Point