Operation Manual

149
Playback
Playing Back Clips
After you select a clip to play back from the index screen, you can control the
playback with the buttons on the monitor unit. If the monitor unit is not
attached, you can control the playback with the buttons on the camera (play/
pause/stop only) or with the joystick and onscreen joystick guide (A 151).
1 Move the orange selection frame to the clip you want to play back.
2 Press the
Ò button to start playback.
• Playback will start from the clip selected and continue until the end of
the last clip in the index screen. When the last frame of the last clip is
reached, playback will be paused.
• Press the Ò button again or press SET to pause/resume the
playback.
• Press the Ñ button to stop the playback and return to the index screen.
IMPORTANT
• Observe the following precautions while an access indicator is illuminated
in red. Failure to do so may result in permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not open the card slot cover of the card being accessed and do not remove the card.
NOTES
• You may notice brief stops in video or audio playback between clips.