Operation Manual

Setting the User Bit
104
Setting the User Bit
The user bit display can be selected from the date or the time of recording, or an identification code consisting of
8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9 and the
letters A to F. That user bit information can then be recorded with XF-AVC clips. If the camera is set to output the
time code (A 107), it will output also the user bit information.
If user bit information is being received along with an external time code, you can also record the external user bit
with XF-AVC clips (A 106).
1 Open the user bit setting screen.
Setup screen: [UB] > [SET UB]
Monitoring menu: [System Setup] ( B ) > [User Bit] > [Type] > [Setting] > [Set]*
* To reset the user bit to [00 00 00 00], select [Reset] instead.
• The user bit setting screen appears with an orange selection frame on the leftmost character.
2 Set the desired user bit using the keyboard screen (A 37).
• Setup screen only: Press [RESET] to reset the user bit to [00 00 00 00].
To use the date or time as user bit
1 Open the user bit [Type] submenu.
Setup screen: [UB] > [OPTIONS] > [Type]
Monitoring menu: [System Setup] ( B ) > [User Bit] > [Type]
2 Select [Time] or [Date] and then press SET.