Operation Manual

237
Specifications
S/N Ratio (Typical, using Canon Log 2, 1600% dynamic range)
Z[qr
68 dB (1920x1080 at 29.97P (59.94 Hz) or 25.00P (50.00 Hz), ISO 800)
]
67 dB (1920x1080 at 29.97P (59.94 Hz) or 25.00P (50.00 Hz), ISO 3200)
Subject Illumination (ISO 25600, with a f/1.2 lens, 100% output)
59.94 Hz: 0.45 lux (shutter speed 1/30)
50.00 Hz: 0.38 lux (shutter speed 1/25)
Built-In Microphone: Monaural electric condenser microphone
Size of Photos: 2048x1080, 2048x872, 1920x1080
Terminals
SDI OUT Terminals (SDI OUT 1 to SDI OUT 4) / MON. Terminals (MON. 1 and MON. 2)
BNC jack, output only, 0.8 Vp-p / 75 , unbalanced
3G-SDI: SMPTE 424, SMPTE 425, SMPTE ST 299-2
HD-SDI: SMPTE 292, SMPTE ST 299-1
Embedded audio, time code (VITC/LTC)
LUT (BT.709, BT.2020, DCI, ACESproxy, HDR-PQ, HDR-HLG, User LUT 1 to 4) and supplemental displays*
(superimposed onscreen displays, peaking, zebra pattern, magnification, B&W image, waveform monitor, false
color display, anamorphic desqueeze) can also be output.
* MON. terminals only.
•HDMI OUT Terminal
HDMI connector, output only
LUT (BT.709, BT.2020, DCI, ACESproxy, HDR-PQ, HDR-HLG, User LUT 1 to 4) and supplemental displays
(superimposed onscreen displays, peaking, zebra pattern, magnification, B&W image, waveform monitor, false
color display, anamorphic desqueeze) can also be output.
VIDEO Terminal
Proprietary connector for the optional EVF-V70 OLED Electronic Viewfinder, output only
LUT (BT.709, HDR (1600% or 400%), User LUT 1 to 4) and supplemental displays (superimposed onscreen
displays, peaking, zebra pattern, magnification, B&W image, waveform monitor, false color display,
anamorphic desqueeze) can also be output.
INPUT Terminals (INPUT 1 and INPUT 2)
XLR 3-pin jack (pin1: shield, pin2: hot, pin3: cold), 2 sets, balanced
Analog Inputs
Sensitivity:
MIC setting: –60 dBu (volume center, full scale –18 dB) / 600
LINE setting: 4 dBu (volume center, full scale –18 dB) / 10 k
Microphone attenuator: 20 dB
Digital Inputs (AES/EBU)
AES3 standard (48 kHz, 24 bit, 2ch) / 110
•MIC Terminal
3.5 mm stereo mini-jack, –72 dBV (volume center, full scale –18 dB) / 1.2 k
Microphone attenuator: 20 dB
×
(Headphone) Terminal
3.5 mm stereo mini-jack, –G to –8 dBV (16 load, volume range Min to Max) / 50 or less
GENLOCK/SYNC OUT Terminal
BNC jack, 1.0 Vp-p / 75
GENLOCK setting: input only; SYNC OUT setting: output only, tri-level HD signal