EOS C700, EOS C700 PL, EOS C700 GS PL, EOS C700 FF, EOS C700 FF PL Instruction Manual

Applying a LUT to Video Outputs
158
Available options are [BT.709 Gamut] and [BT.2020 Gamut]. To leave the color space unconverted, select
[Do Not Convert].
Selecting the Output Range
You can select the output range for the video output.
1 Open the [Range(Output)] submenu.
HOME screen: > [COLOR] > [USER LUT] > [Range(Output)]
Monitoring menu: > [Monitoring Setup] (
¢
) > [LUT] > [User LUT] > [Range(Output)]
2 Turn the SELECT dial to select the desired user LUT (user LUT 1 to 4) and then press SET.
3 Select the desired output range and then press SET.
Available options are [Narrow Range] and [Full Range].
Deleting User LUTs
You can delete user LUTs in the camera either individually or all at once.
1 Open the screen for deleting user LUT files.
HOME screen: [COLOR] > [USER LUT] > [Delete] or [Reset All]
Monitoring menu: [Monitoring Setup] (
¢
) > [LUT] > [User LUT] > [Delete] or [Reset All]
If you intend to delete user LUT files individually, continue to step 2. Otherwise, skip to step 3.
2 Turn the SELECT dial to select the desired user LUT (user LUT 1 to 4) and then press SET.
3 HOME screen: Press both [DELETE] buttons (for the [Delete] option) or [RESET] buttons (for the [Reset All]
option) simultaneously.
Monitoring menu: Select [OK] and then press SET.
Depending on the method chosen in step 1, one or all user LUT files will be deleted.
4 Press [OK] (HOME screen) or press SET (monitoring menu).
Renaming User LUTs
You can rename each of the four user LUT files in the camera.
1 Open the [Rename] submenu.
HOME screen: [COLOR] > [USER LUT] > [Rename]
Monitoring menu: [Monitoring Setup] (
¢
) > [LUT] > [User LUT] > [Rename]
2 Turn the SELECT dial to select the desired user LUT (user LUT 1 to 4).
3 Enter the desired name (up to 8 characters) using the keyboard screen (A 37).
Displaying User LUT Information
1 Open the [Display Info] submenu.
HOME screen: [COLOR] > [USER LUT] > [Display Info]
Monitoring menu: [Monitoring Setup] (
¢
) > [LUT] > [User LUT] > [Display Info]
2 Turn the SELECT dial to select the desired user LUT (user LUT 1 to 4) and then press SET.
NOTES
The camera supports 3D LUT files (.cube format) created with Blackmagic Designs DaVinci Resolve in 33 grid
format. Save the file in the root folder of the SD card.
The following LUT files are not supported.
- Files 2 MB and larger.