Operation Manual

Setup Screens and Menu Options
194
* Monitoring menu only.
** The default value depends on the country/region or purchase.
[Monitoring Setup] ( ¢ ) menu
[Country Code], [Organization],
[User Code]
Identifiers up to 4 characters ([00__] default for [Organization] only)
[Country Code]: This identifier is the country code defined by ISO-3166-1 and is to be entered
starting from the left.
[Organization]: This identifier represents the organization that owns or operates the camera and can
be obtained by registering with the SMPTE Registration Authority. If the organization is not
registered, enter [0000].
[User Code]: This identifier designates the user. Leave this blank if [Organization] is set to [0000].
[Add / File] [On], [Off] (A 133)
[Clip Numbering] [Reset], [Continuous] (A 63)
[Photo Numbering] [Reset], [Continuous] (A 125)
Submenu levels / Menu items Setting options and additional information
[Control Display] (A 31)
[Camera]
[Brightness] 1 to 5 (3)
[Turn Off Display] [Assignable Buttons], [Auto (Remote OU-700)]
[Remote OU-700]
[Brightness] 1 to 5 (3)
[EVF-V70]* (A 42)
[Brightness], [Contrast] –99 to 99 (±0)
[Color] –20 to 20 (±0)
[Sharpness] 1 to 4 (2)
[Luminance] [Normal], [High]
[Eye Sensor] [On], [Off]
When this setting is set to [On], the optional viewfinder will be dimmed automatically when the
sensor does not detect the user’s eye near the eyepiece for 30 seconds (or 10 seconds, in playback
mode).
[Surrounding Area]
[Activate] [On], [Off]
When this setting is set to [On], the image from the camera will be reduced and some of the
surroundings around the recorded frame will be shown on the shooting screen. qr
Available only when [Camera Setup] > [Sensor Mode] is set to [Super 35mm (Cropped)]
or [Super 35mm].
[Select] [Line], [Mask 25%], [Mask 50%], [Mask 75%]
You can use a color line or apply masking to the non-recorded areas to distinguish the area covered
by the recorded frame from the surroundings. If you selected [Line], you can select the color of the
border line with the [Line Color] setting.
[Line Color] [Yellow], [Blue], [Green], [Red], [Black], [Gray], [White]
[Anamorphic] (A 122)
[Desqueeze Ratio] [Lens Squeeze Factor], [x2.0], [x1.3]
[VIDEO Output],
[MON.+HDMI Output]
[On], [Off]
Submenu levels / Menu items Setting options and additional information