CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A. INC. For all inquiries concerning this camera, call toll free in the U.S. 1-800-OK-CANON or write to: Customer Relations, Canon U.S.A., Inc. One Canon Plaza, Lake Success, N.Y. 11042-1198 CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E.
Index Thank you for purchasing this Canon product The EOS D60 digital camera is a high-performance, single-lens reflex AF camera with an ultrafine CMOS sensor having approx. 6.3 million effective pixels. The camera is compatible with all Canon EF lenses and designed for quick and easy shooting. It is full-featured for all types of photography, from fully automatic snapshooting to professional-level, creative work. CompactFlash cards (CF Type I and II) serve as the recording medium.
Equipment Check List Be sure all the following equipment and accessories have been included with your camera. If anything is missing, contact your dealer.
Contents Close-Up Mode ............................... 46 Sports Mode .................................. 47 Night Portrait Mode ........................ 48 Introduction Equipment Check List .......................... 3 Handling Precautions ......................... 10 Quick Guide ....................................... 12 Nomenclature ..................................... 14 Conventions Used in This Manual ...... 20 1 Before You Start .......................... 21 Charging the Battery Pack .............
Contents 5 Playing and Erasing Recorded Images ... 97 Viewing Recorded Images ................. 98 Viewing a Single Image .............. 98 Viewing the Index ..................... 98 Viewing Enlarged Images ......... 99 JUMP Jumping to Another Image ..... 99 INFO. Turning the Information Display On and Off .................................. 100 Automated Playback of Recorded Images (Auto playback) .............. 101 Rotating an Image ................. 102 Protecting an Image ..................
EOS D60 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note:This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules.
SAFETY PRECAUTIONS • Before using the camera, please ensure that you have read and understood the safety precautions described below. Always ensure that the camera is operated correctly. Introduction • The safety precautions noted as follows are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment. • The term “equipment” refers primarily to the camera and its power supply accessories.
• Do not use substances containing alcohol, benzene, thinners or other flammable substances to clean or maintain the equipment. The use of these substances may lead to fire. • Do not cut, damage, alter or place heavy items on the power adapter cord. Any of these actions may cause an electrical short circuit, which may lead to fire or electrical shock. Replace a broken or damaged power adapter cord. • Do not handle the power cord if your hands are wet. Handling it with wet hands may lead to electrical shock.
CAUTIONS • Do not store the equipment in humid or dusty areas. Storage in these areas could lead to fire, electrical shock or other damage. • Be careful not to bang the camera or subject it to strong impacts or shocks that could lead to injury or damage the equipment when wearing or holding it by the wrist strap. • Be careful not to cover the flash with your fingers when shooting. In addition, do not touch the surface of the flash after taking several pictures in rapid succession.
Handling Precautions The Camera (1) This camera is a precision instrument. Do not drop it or expose it to physical shock. (2) The camera is not waterproof and should not be used in wet conditions or underwater. If the camera gets wet, take it to your nearest Canon dealer as soon as possible. If small amounts of water splash onto the camera, wipe it with a clean dry cloth. If the camera is exposed to salty air, wipe it thoroughly with a slightly damp cloth.
Handling Precautions (3) If an LCD display becomes soiled, clean it with a commercially available blower brush, or wipe it with a soft cloth, taking care not to scratch the screen. If an LCD display becomes extremely soiled, consult your nearest Canon dealer. (4) By their nature, LCD displays react more slowly at low temperatures, and may appear dark at high temperatures. The display will return to normal at room temperature. (1) Store lithium batteries out of reach of small children.
Quick Guide Reference page numbers are indicated by (→✽✽) . 1 Charge the battery pack. 5 Open the CF card slot cover. 9 Focus on the subject. 12 Connect the power cord to the adapter, then attach the battery. When the charge lamp stops blinking and stays lit, the battery is completely charged. A full battery charge takes approximately 90 minutes. (→22) Slide the cover in the direction shown by the arrow, then open it. (→28) Look through the viewfinder and place the AF point over the subject.
Quick Guide Mount the lens. 7 Turn on the camera. Align the red dots on the lens and camera and turn the lens in the direction shown by the arrow in the diagram until it clicks into place. (→27) Turn the main switch to . (→29) 11 Check the image. The image is displayed for approximately 2 seconds after the shot. (→40) 4 Set the focus mode switch on the lens to AF. 8 Set the Mode Dial to < (Full Auto).
Nomenclature 〈 AF 〉 AF mode selection/White balance WB selection button (→54, 66) 〈DRIVE〉 Drive mode selection button (→63) 〈 〉 Metering mode selection/ Flash exposure compensation button (→61, 91) Lens mount index (→27) Built-in flash (→86) LCD panel (→16) Hot shoe (→92) 〈 〉 Main dial (→30) 〈 Shutter button (→29) 〉 Flash button (→86) Mode dial (→18) Strap mount (→21) Grip (Battery chamber) Lens release button (→27) DC coupler cord hole (→26) Depth-of-field preview button (→73, 95) Red-eye reduct
Nomenclature Dioptric adjustment knob (→36) Eyecup (→82) Viewfinder eyepiece Quick control dial switch (→31) Main switch (→29) 〈 〉 AE lock /FE lock button (→80, 90) 〈 〉 AF point selection button (→57) 〈INFO.
Nomenclature LCD Panel Shutter speed ( , ) Data processing ( ) Date/time battery level warning ( Cleaning warning ( ) Parameters ( ) ISO Speed ( ) No CF card warning ( ) CF full warning ( ) CF error warning ( ) AF point ( ) Error cod ( - ) Cleaning ( ) Quality Large/Fine Large/Normal Medium/Fine Medium/Normal Small/Fine Small/Normal RAW ) Aperture value ( Beeper Battery check Red-eye reduction Flash exposure compensation Shots remaining ( - ) Self-timer countdown ( - ) Bulb exposure time ( ) ISO speed
Nomenclature Viewfinder Information New laser matte screen AF points (Superimposed display) Partial metering circle Introduction Focus confirmation light AE lock/FE lock AEB in progress Maximum burst count during continuous shooting ( - ) Shots remaining in CF card ( ) Flash-ready indicator FE lock underexposure warning High-speed sync (FP flash) Exposure level Exposure compensation amount AEB level Flash exposure compensation amount Red-eye reduction lamp-on indicator Flash exposure compensation
Nomenclature Mode Dial The Mode Dial is divided into two functional zones. Creat ive zon e Full Auto zo ne e Image si Ba 1 Basic zone ● All you do is press the shutter button. : Full Auto (→38) Lets you take fully automatic pictures—the camera makes all the settings. Image zone Lets you take fully automatic pictures in specific situations. : Portrait (→44) : Landscape (→45) : Close-up (→46) : Sports (→47) : Night Portrait (→48) Reference page numbers are indicated by (→✽✽) .
Nomenclature Compact Power Adapter CA-PS400 Power cord (→22, 26) Power cord socket (→22, 26) Plug in power cord here. Charge lamp (→22) Back DC coupler socket (→26) Plug in cord for DC coupler here. DC coupler plug (→26) Plug into DC coupler socket of compact power adapter. DC Coupler DR-400 DC coupler cord (→26) 19 Introduction Battery pack connectors (→22) Attach battery packs for charging.
Conventions Used in This Manual ● The procedures in this booklet assume that the camera has been turned on. Before proceeding, be sure that the main switch is set to < ON > . ● In this manual, the < ● In this manual the < > icon indicates the Main Dial. > icon indicates the Quick Control Dial. ● In this manual the < > icon indicates the SET button, used to set menu functions and custom functions. ● The camera control icons and markings in this booklet correspond to the icons and markings on the camera.
1 This chapter describes preparations and settings you need to make before you start shooting, as well as how the shutter button operates. Attaching the Strap Pass the end of the strap through the strap mount from beneath, then back in and out of the strap clasp as shown. Pull the strap to make sure it does not slip out of the clasp. ● The eyepiece cover is attached to the strap.
Charging the Battery Pack <–> mark Battery charge 0–50% 50–75% Over 75% Almost full 22 Charge lamp Blinks once per second Blinks twice per second Blinks three times per second Stays on 1 Connect the power cord. 2 Remove the cover. 3 Place the battery in the adapter. 4 Charge the battery pack. ● Connect the power cord to the compact power adapter. ● Insert the plug into a power outlet. ● Store the cover in a place where it will not be lost.
Charging the Battery Pack ● When the DC coupler is connected to the compact power adapter, the adapter cannot be used to charge battery packs. ● Do not charge any battery packs other than model BP-511. ● When the battery pack is in the camera, it discharges slightly all the time even when the camera is not used. This reduces the battery pack’s life due to over discharge. When not using the camera, remove the battery pack and store it with its protective cover attached.
Inserting and Removing the Battery Pack Inserting the Battery Pack Load a fully charged BP-511 battery pack into the camera. 1 Open the battery chamber cover. 2 Insert the battery into the camera. 3 Close the cover. ● Slide the lever in the direction shown by the arrow in the diagram, and open the cover as shown. ● Make sure the battery pack is facing the right way, and insert it into the battery chamber. ● Insert the battery pack until it locks into place.
Inserting and Removing the Battery Pack Battery Life Temperature Normal (20°C/68°F) Low (0°C/32°F) Shooting conditions No flash use 50% flash use Approx. 620 Approx. 490 Approx. 480 Approx. 400 ● The above figures were obtained under Canon test conditions (fully charged battery, EF 50mm f/1.4 USM lens, Review function [On], Review Time [2 sec.], Quality [Large ]). 1 Removing the Battery Pack 1 Open the battery cover. 2 Remove the battery pack. 3 Close the battery cover.
Inserting and Removing the Battery Pack Using a Household Power Supply You can operate the EOS D60 from a household power outlet by using the DC coupler. This enables you to use the camera as long as you like without a battery. 1 Connect the DC coupler. 2 Place the cord in the groove. 3 Insert the DC coupler into the camera. 4 Connect the power cord. ● Plug the DC coupler into the compact power adapter. ● Carefully insert the cord into the groove.
Mounting and Detaching a Lens Mounting a Lens 2 Attach the lens. 3 Set the focus mode switch on the lens to < AF >. 4 Remove the front lens cap. ● Remove the rear lens cap and the body cap by turning them as shown by the arrows in the diagram. 1 ● Align the red dots on the lens and camera and turn the lens as shown by the arrow until it clicks in place. ● If the focus mode switch is set to < MF > (or < M> on older lenses), the autofocus will not > will be displayed on the operate and < LCD panel.
Installing a CF Card The captured images are saved on a CF card (optional). The camera is compatible with Type I and Type II CompactFlash (CF) cards. mark Eject button 1 Open the cover. 2 Insert the CF card. 3 Close the cover. 1 Open the cover. 2 Remove the CF card. Label side ● Slide the cover in the direction shown by the arrow, and open it as shown in the diagram. ● Using CF cards made by Canon is recommended.
Basic Operation Main Switch The camera operates only after the Main Switch is set to . < ON > : Set to this position when the camera is in use. < OFF > : The camera does not operate. Set to this position when not using the camera. 1 Shutter Button The shutter button has two stages. You can press it down halfway or fully.
Basic Operation Using the Electronic Dials Basic Operations with the < > Dial The < > dial is used to make settings only when taking pictures. It can be used in two ways. (1) Press a button and turn the < > dial. When you press a button, its function remains active while a timer ( 6 ) runs. During this time you can turn the < > dial and view the settings on the LCD panel. When the timer runs out or you press the shutter button down halfway, the camera is ready to take a picture.
Basic Operation Basic Operations with the < > dial You can only use the < > dial when the Quick Control Dial switch is set to < ON>. Use the dial for shooting preparation and selection of functions from the LCD monitor. When using the < > dial to carry out basic operations, you can use it in two ways. (1) Press a button and turn the < 1 > dial. Use the dial this way to select and set the white balance, drive mode and flash exposure compensation. (2) Just turn the < > dial.
Basic Operation Menu Functions and Settings The Canon EOS D60 uses menu functions to set functions such as the quality, the date and time, and Custom Function settings. To use the menu functions, look at the LCD monitor and use the
Basic Operation Menu Selections and Default Settings On the Menu screen, items and settings are shown in different colors according to the functions they control. Selected items are enclosed in a color frame.
Setting the Date and Time Set the date and time as shown below. The date and time are recorded with the image data for each photographed image. 1 From the Menu, select [Date/ Time]. 2 Press the < 3 Set the date and time. 4 Select the order for the display. ● Press the < MENU> button. ● Turn the < > dial to select [Date/Time]. ➡ The Date/Time setting screen appears. ● Turn the < > dial to adjust the date or time values, then press the < > button. ● After entering the setting, go to the next item.
Setting the Date and Time 5 Press the < > button. ➡ The date and time are set, and the display returns to the menu. ● Press the < MENU> button to clear the screen and exit the menu. 1 Before You Start ● Each photographed image is recorded with the date and time it was taken. If the date and time are not set, they cannot be recorded correctly. Make sure you set the date and time correctly. ● The date and time setting is maintained by the date/time battery.
Dioptric Adjustment in the Viewfinder Use the dioptric adjustment in the viewfinder to best suit your eyesight. This adjustment can enable eyeglass wearers to see through the viewfinder clearly, even without their eyeglasses. The camera’s adjustable dioptric range is –3 to +1 dpt. Turn the Dioptric Adjustment Knob ● Turn the knob right or left until the AF point or the center spot metering circle appears sharply defined in the viewfinder. ● The diagram shows the knob set at the standard diopter (–1 dpt).
Basic zone 2 2 This chapter describes how to use the camera’s Basic Zone modes< >, < >, < >, < >, < >, < > for quick and easy shooting. In these modes, all you do is point and shoot. In addition, to help prevent mistakes caused by operating the camera improperly, the < > dial, and >, and < > buttons do not the < >, < AF WB >, < operate so there is no need to worry about accidental errors.
Fully Automatic Picture Taking You can easily and confidently take pictures of any subject, with no need to do anything but press the shutter button. The Canon EOS D60 can capture subjects at any of three AF points, so that anybody can take great pictures easily. 1 Set the Mode Dial to < 2 Place one of the AF points on the subject. 3 Set the focus. 4 Check the display. AF point >.
Fully Automatic Picture Taking ● If the CF card becomes full, the CF Full message “ ” appears on the LCD panel and in the viewfinder, and the camera will not take any more pictures. Replace the CF card with another CF card that has capacity available. ● When the in-focus indicator < ●> is blinking, the camera will not take pictures. (→59, 137) ● The focus and exposure are locked when AF focusing is complete. ● The camera automatically focuses on the AF point that is on the subject closest to the camera.
Check the Image Immediately You can view the images you take immediately, on the LCD monitor on the back of the camera. 1 Take the picture. ➡ After the picture is taken, the image as it was shot appears on the LCD monitor. During continuous shooting, the last captured image will be displayed. ● The image is shown for approximately 2 seconds. ● You can turn the Review function on or off, as well as display the image information display. (→41) ● You can change the length of time the image is displayed.
Check the Image Immediately Checking the Image After it is Taken You can set the camera to display each image on the LCD monitor as soon as it is taken. You can do this two ways: Select [On] to display the image by itself, or select [On (Info)] (→100) to display the image with its recording information. Select [Off] if you do not want to display the image. The default setting is [On]. 1 From the Menu, select [Review]. ● Press the < MENU> button.
Check the Image Immediately Time for Image Review You can control how long images are displayed by setting the review time to [2 sec.], [4 sec.], [8 sec.], or [Hold] which keeps the image on the monitor screen. The default setting is [2 sec.]. 1 From the Menu, select [Review time]. 2 Set the review time. ● Press the < MENU> button. ● Turn the < > dial to select [Review time], then press the < > button. ● Turn the < > dial to select the review time you want, then press the < > button.
Erasing a Recorded Image (Single Image Erase) 1 Set the camera to Play mode. 2 Select the image you want to erase. 3 Open the Erase menu. 4 Erase the image. ● Press the < > button to enter Play mode. ➡ The most recent image appears. ● Turn the < > dial to select the image you want to erase. ● Turn the < > dial to select [Erase], then press the < > button. ➡ The access lamp blinks and the image is erased. You cannot recover an image once you have erased it.
Portrait Mode This mode blurs the background to make the subject stand out. Set the Mode Dial to < >. ● The way you take pictures is the same as in < > (Full Auto) mode. (→38) ➡ The AF mode is automatically set to , the drive mode to < >, and the metering mode to < >. The image quality can also be set. (→50, 118) ● Head-and-shoulder shots give the best background blur effect. Also, the farther the subject is from the background, the more blurred the background will appear.
Landscape Mode This mode is for sweeping scenery, sunsets, etc. Set the Mode Dial to < >. If the shutter speed indicator blinks, the shutter speed may be too slow to keep the picture from being blurred by camera shake. We recommend you use a tripod when taking landscape pictures. (The shutter speed indicator still blinks if you use a tripod, but camera shake will not be a problem.) ● The built-in flash does not fire in Landscape mode, even if it is raised. ● The image quality can also be set.
Close-Up Mode This mode is for taking close-up shots of flowers, insects, or other small subjects. Set the Mode Dial to < >. ● The way you take pictures is the same as in < > (Full Auto) mode. (→38) ➡ The AF mode is automatically set to , the drive mode to < > (Single-frame), and the metering mode to < >. The image quality can also be set. (→50, 118) ● Close-up mode is most effective when the subject is at the minimum focusing distance of the lens.
Sports Mode This mode is used for sports photography and capturing fast-moving subjects. Set the Mode Dial to < >. ● The way you take pictures is the same as in < > (Full Auto) mode. (→38) ➡ The AF mode is automatically set to , the drive mode to < >, and the metering mode to < >. 2 Simple Picture Taking If the shutter speed indicator blinks, the shutter speed may be too slow to keep the picture from being blurred by camera shake.
Night Portrait Mode This mode is for taking pictures of people at sunset or at night. It uses flash to illuminate the subject and a slow shutter speed to expose the background, resulting in a natural-looking exposure. Set the Mode Dial to < >. ● The way you take pictures is the same as in < > (Full Auto) mode. (→38) ➡ The AF mode is automatically set to , the drive mode to < > (Single-frame), and the metering mode to < >. To prevent camera shake, always use a tripod.
Advanced Operations Creative zone The Creative zone features shooting modes that let you select the shutter speed or aperture value and change the exposure yourself, providing you with more flexibility to set up the camera for a variety of shooting styles. This chapter describes how to make effective use of each of these functions. ● The < > icon represents the Main Dial, and the < > icon represents the Quick Control Dial.
Quality Selection Use the Menu function to choose from seven Quality settings: Quality Large/Fine Large/Normal Medium/Fine Medium/Normal Small/Fine Small/Normal RAW Icon Recording size 3072 × 2048 2048 × 1360 1536 × 1024 3072 × 2048 Recording Compression Size of one Recording method ratio image capacity Approx. 48 shots Low 2.5 Mbyte High 1.3 Mbyte Approx. 92 shots 1.4 Mbyte Approx. 89 shots Low JPEG High 0.7 Mbyte Approx. 172 shots Low 0.9 Mbyte Approx. 138 shots High 0.5 Mbyte Approx. 255 shots Approx.
ISO Speed ISO speed is an index number representing the photosensitivity of silver-halide film. Digital cameras do not use film, but their photosensitivity is commonly described in terms of “ISO equivalent” speed settings. (→130) The higher the number, the greater the sensitivity. Higher speeds are better for taking pictures of moving subjects or in dim light, but the pictures will also contain more noise and so will be less sharp.
Setting Processing Parameters Contents of processing for the captured image (parameters: [contrast], [sharpness],[saturation] and [color tone]) can be set with the camera, and you can set and register up to three sets of parameters. Defaut setting is “standard” (0 for all parameters).
Setting Processing Parameters 4 Select the parameter to be set. ● Turn the < > dial to select the parameter, then press < >. ● The parameter selection will change in the following loop: [Contrast] [Sharpness] [Saturation] [Color tone] 3 Set the desired parameter setting. 6 Go back to step 1. 7 Select the desired set number. ● Turn the < > dial and select [–], [0], or [+]. Then press < > . ● Press the
button twice to return to step 1, then press < >.AF Mode Selection The AF mode setting controls how the autofocus functions operate. The camera has two AF modes: One-shot AF for still subjects, and AI Servo AF for moving subjects. AF mode selection is available in all Creative zone settings except for < >. 1 Set the lens focus mode switch to . 2 3 Set the Mode Dial to a Creative zone setting other than < >. 4 Select the AF mode. AF Press the < WB > button. ( 6 ) ● Turn the < > dial to make the selection.
AF Mode Selection One-Shot AF for Still Subjects Superimposed display 3 Press the shutter button down halfway to activate AF operation and focus once. ➡ The AF point achieving focus will flash in red and the beeper will sound. The focus confirmation light <● > at the lower right will also light. ● When using evaluative metering, the exposure setting is determined when focus is achieved. The exposure setting and focus remain locked as long as the shutter button is pressed down halfway.
AF Mode Selection AI Servo AF for Moving Subjects Press and hold the shutter button down halfway, and the camera focuses continuously. ● This mode is suited for moving subjects when the focusing distance keeps changing. ● With its predictive AF function, the camera can also track a subject that is steadily approaching or retreating from the camera. ● The exposure settings are determined immediately before the picture is taken.
AF Point Selection The AF point can be selected automatically or manually. In the Basic Zone modes and < mode, AF point selection will be automatic. In the < >, < >, < >, and < > modes, AF point selection can be set to either automatic or manual. > Automatic selection : The camera selects the AF point automatically according to conditions. Manual selection : You can select any of the three AF points manually.
Focusing On an Off-Center Subject To focus on a subject not covered by one of the three AF points, follow the procedure below. This technique is called Focus Lock. Focus lock is valid when the AF mode is set to One-shot AF. 1 2 Select an AF point. 3 Hold the shutter button down halfway and recompose the picture. 4 Take the picture. (→57) Focus on the subject. ● Place the AF point over the subject and press the shutter button down halfway.
Problem Subjects for Autofocusing The EOS D60 has a precision AF system that can focus on most subjects.
INFO. Checking Camera Settings When the camera is ready to shoot, press the button to view the current camera settings on the LCD monitor. Camera Setting Information Auto power off time (→29, 120) Review (→41), Review time (→42) Parameters (→52) C.Fn (Custom Function) number(s) (→122) Flash exposure compensation (→91) Shots remaining AEB (→78) ISO speed (→51) CF card capacity remaining (→50) 1 Display the camera settings. ● Press the button.
Selecting a Metering Mode The EOS D60 uses three modes for metering: Evaluative, Partial, and Center-weighted average. The Basic Zone uses evaluative metering. In the Creative zone, any of the three modes can be selected. 1 Press the < > button. ( 6 ) 2 Select a metering mode. ➡ Look at the LCD panel as you turn the < > dial. 3 Advanced Operations : Evaluative : Partial : Center-weighted average ● Press the shutter button down halfway to return to ready-to-shoot mode.
Metering Modes : Evaluative Metering This is an all-around metering mode suited even for backlit subjects. The viewfinder field is divided into 35 metering zones to which the three AF points are linked for evaluative metering. The camera determines the main subject’s size, position, brightness, background, front and back lighting, etc., so that it can select the proper exposure for the subject at all times. ● When using manual focusing, evaluative metering is based on the center AF point.
Selecting a Drive Mode You can set the EOS D60’s drive mode to single-frame shooting, continuous shooting or selftimer operation. Single-frame shooting < Continuous shooting < Self-timer operation: Size/Quality Maximum number of images (Approx. images/sec.) ONE SHOT AI SERVO 3 2.5 Max. Burst During Continuous Shooting (Approx. images) ONE SHOT AI SERVO 8 3 ● The figures above are based on Canon’s testing standards (at 1/250 sec. or faster and ISO 100). 1 Press the < DRIVE> button.
Selecting a Drive Mode ● During continuous shooting, the captured images are first stored in the camera's internal memory and then successively transferred to the CF card. When the internal memory becomes full during continuous shooting, “ ” will be displayed on the LCD panel and in the viewfinder and the camera cannot take any more pictures. As the captured images are transferred to the CF card, you will be able to take more pictures.
White Balance Settings In light from any source, the proportion of the primary colors (red, green, blue) in the light varies according to the color temperature. Higher color temperatures contain a greater proportion of blue, and lower color temperatures contain a greater proportion of red. Moving from low to high, the progression is red → orange → yellow → white → blue-white.
Custom White Balance Setting Custom white balance lets you set the white balance yourself by photographing a white subject to use as the basis for the camera’s white balance, and then selecting that picture for use as white balance data. 1 Photograph a white subject. 2 From the menu, select [Custom WB]. 3 Select the image. 4 5 Press the < WB > button. ( 6 ) Partial metering zone 66 ● Take a picture of a white subject, just as you would take a normal picture.
Custom White Balance Setting/LCD Panel Illumination ● For best results, use subjects such as plain white paper for white balance basis. ● White balance data is loaded from the partial metering zone (→17). ● You can store white subjects photographed under various conditions on the CF card, then select these images as needed for the [Custom WB] function as an easy way of setting the ideal white balance for any lighting conditions. ● The default setting for < > is the same as the default setting for < >.
Program AE Like < > (Full Auto) mode, this is a generalpurpose picture-taking mode. The camera automatically sets the shutter speed and aperture value to suit the scene’s brightness. This is called Program AE. ∗ stands for Program ∗ AE stands for Auto Exposure 68 1 Set the Mode Dial to < >. 2 Focus on the subject. 3 Check the display. 4 Take the picture. ● Press the shutter button down halfway. ➡ The AF point achieving focus will flash in red and the beeper will sound.
Program AE Differences Between Program AE Mode < > and Full Auto Mode < > ● < > (Program AE) and < > (Full Auto) mode are alike in that both automatically determine the shutter speed and aperture values. ● The following functions can be used in < > mode but not in < > mode.
Shutter-Priority AE In this mode, you set the shutter speed, and the camera automatically sets the aperture value to suit the brightness of the subject. This is called Shutter-Priority AE. A fast shutter speed can freeze the motion of a fast-moving subject, and a slow shutter speed can blur the subject to give the impression of motion. stands for “time value.” ∗ Fast shutter speed 70 Slow shutter speed 1 Set the Mode Dial to < 2 Set the shutter speed. 3 Focus on the subject.
Shutter-Priority AE ● If the smallest aperture value (the maximum open aperture) for the lens you are using blinks, the scene is too dark. Turn the < > dial to a slower shutter speed until the aperture value stops blinking. ● If the largest aperture value (the minimum aperture) for the lens you are using blinks, the scene is too bright. Turn the < > dial to a faster shutter speed until the aperture value stops blinking. The ideal shutter speed for capturing a clear image from a TV screen is 1/15 second.
Aperture-Priority AE In this mode, you set the aperture value, and the camera automatically sets the shutter speed to suit the brightness of the scene. This is called Aperture-Priority AE. By setting a smaller aperture value (larger aperture), you can blur the background to make the subject stand out as in a portrait. Or, by setting a larger aperture value (smaller aperture), you can increase the depth of field to make both the foreground and background look sharp. ∗ Av stands for “aperture value.
Aperture-Priority AE/Checking the Depth of Field ● If the 30” shutter speed blinks, the scene > dial to reduce is too dark. Turn the < the aperture value (larger aperture). ● If the 4000 shutter speed blinks, the scene is too bright. Turn the < > dial to increase the aperture value (smaller aperture). Aperture Value Display You can set the aperture in half stops as shown below. The higher the aperture value, the smaller the aperture opening.
Manual Exposure In this mode you set the shutter speed and aperture value yourself. The camera makes no settings automatically. You can determine the correct combination of shutter speed and aperture value by checking the exposure level displayed in the camera. ∗ stands for manual. 74 1 Set the Mode Dial to < 2 Set the shutter speed. 3 Set the aperture value. 4 Focus on the subject. ● Turn the < >. > dial. ● Set the Quick Control Dial switch to , then turn the < > dial.
Manual Exposure 5 Determine the exposure. ● Set the shutter speed or aperture value manually. Standard exposure : This is the standard reference point for a correct exposure. Underexposure : Decrease the shutter speed or reduce the aperture value. Overexposure : Increase the shutter speed or increase the aperture value. 6 Take the picture. ● Compose the picture, then press the shutter button down fully.
Automatic Depth-of-Field AE When taking pictures of large groups or landscapes, the EOS D60 can automatically achieve a sharp focus over a wide depth of field. All the subjects covered by the AF points, from those close to the camera to those far away from the camera, can be taken clearly. ● In < > mode, the shutter speed and aperture value cannot be changed freely. If the camera selects a slow shutter speed, the use of a tripod is recommended.
Setting Exposure Compensation Exposure compensation is used to alter the camera’s standard exposure setting to make the picture brighter (increased exposure) or darker (decreased exposure). Exposure compensation can be set up to +/–2 stops, in 1/2-stop increments. 1 2 Set the Quick Control Dial switch to < ON >. 3 Set the exposure. Focus on the subject, then check the exposure level. ● Press the shutter button down halfway and check the display.
Autoexposure Bracketing When using autoexposure bracketing, the camera automatically changes the exposure level within the set range (up to +/–2 stops in 1/2-stop increments) for three successive frames. This is called AEB (Auto Exposure Bracketing). The three bracketed shots are exposed in the selected drive mode (→63) in the following order: correct exposure, decreased exposure, and increased exposure. Standard exposure (0) Decreased exposure (–1.
Autoexposure Bracketing ● Neither flash nor bulb exposures can be used in AEB mode. ● If you set mirror lockup with C.Fn-3-1 and then use AEB, single-frame shooting takes effect even if the drive mode is set to continuous shooting. ● To indicate that AEB is in progress, the < > AEB icon on the LCD panel and the < > indicator in the viewfinder blink until all three bracketed shots have been taken.
AE Lock AE lock enables you to lock the exposure at a place other than the point of focus. After locking the exposure, you can recompose the shot while maintaining the exposure level. This feature is useful for backlit and spotlighted subjects. ● The effects of the AE lock depend on the AF point and metering method selected. (→133) 1 Focus on the point on which you want to lock the exposure reading. ➡ The exposure value is displayed in the viewfinder. 2 3 Press the < > button.
Self-timer Operation The self-timer is convenient for group photographs. You can use it in any Basic mode or Creative mode. We recommend using a tripod when you use the self-timer. 1 Select the self-timer. 2 3 Focus on the subject. ● Press the < DRIVE> button ( 6 ), and turn the < > dial to select < >. Take the picture. ● Press the shutter button down fully. ➡ The beeper sounds as the red-eye reduction lamp operates, and the picture is taken after 10 seconds.
Self-timer Operation Using the Eyepiece Cover If you take a picture using the self-timer or remote switch (optional) without looking through the viewfinder, stray light can enter the eyepiece and affect the exposure. To prevent this, attach the eyepiece cover to the viewfinder eyepiece before taking the picture. 82 1 Remove the eyecup. 2 Slip the eyepiece cover over the eyepiece. ● Grasp both sides of the eyecup and lift it up and away from the camera. ● The eyepiece cover is attached to the strap.
Bulb Exposures In a bulb exposure, the shutter remains open as long as you hold the shutter button down, and closes when you release it. Bulb exposures are useful for the long exposures required for night scenes, fireworks, etc. 1 2 Set the Mode Dial to < >. Set the shutter speed to “ ”. ● Look at the LCD panel and turn the < dial to select “ ”. ● The next setting after “ ” is “ ”. > 3 4 Take the picture. ● Turn the < Advanced Operations 3 Set the aperture value. > dial.
Mirror Lockup Mirror lock is enabled with C.Fn-3-1 (→122). This function raises the mirror and exposes the picture, in separate operations. It is useful for close-up shots or when using a super telephoto lens, where the mirror shock could affect the picture. ● When using mirror lockup, we recommend you use the Remote Switch RS-80N3 (optional). 1 Press the shutter button down fully. 2 Press the shutter button down fully again. ➡ The mirror is raised.
Flash Photography 4 85 4 Flash Photography The EOS D60 can take easy, natural-looking flash pictures with correct subject illumination using E-TTL autoflash (preflash evaluative metering in memory) and either the camera’s built-in flash or any EOS-dedicated EX-series Speedlite. The procedure is as easy as a normal AE shot. This chapter describes how to take flash pictures with the built-in flash, with the EOS-dedicated 550EX Speedlite, or other types of external flash.
Using the Built-in Flash The built-in flash lets you take the following kinds of flash pictures with the ease of a normal AE shot. ● E-TTL autoflash E-TTL autoflash (preflash evaluative metering in memory) supplies the correct level of flash for the subject in the AF point selected by AF. ● FE (Flash Exposure) lock (→90) FE (flash exposure) lock sets the correct flash exposure for a selected part of the subject. The FE lock functions as an AE lock with flash.
Using the Built-in Flash Built-in Flash Range (using EF24-85mm f/3.5-4.5 USM lens) ISO Speed 100 200 400 800 1000 Wide-angle: 24 mm Approx. 1-3.4 m (3.3-11.2 ft) Approx. 1-4.8 m (3.3-15.7 ft) Approx. 1-6.8 m (3.3-22.3 ft) Approx. 1-9.6 m (3.3-31.5 ft) Approx. 1-10.8 m (3.3-35.4 ft) Telephoto: 85 mm Approx. 1-2.6 m (3.3-8.5 ft) Approx. 1-3.7 m (3.3-12.1 ft) Approx. 1-5.3 m (3.3-17.4 ft) Approx. 1-7.5 m (3.3-24.6 ft) Approx. 1-8.4 m (3.3-27.
Using the Built-in Flash ● When using an EX-series Speedlite (→92), press the built-in flash back into the camera before mounting the external flash. ● When using the built-in flash, keep at least 1 m/3.3 ft away from the subject. Otherwise the lens barrel may partially obstruct the flash and cause part of the photo to look dark. ● When using the built-in flash, detach any hood from the lens to keep it from obstructing flash coverage.
Using the Built-in Flash Red-eye Reduction When you use flash in low-light conditions, it can reflect off your subject’s pupils and make their eyes look red in the recorded imge. This effect is called “red-eye,” and is caused by the light of the flash reflecting off the retina of the eye. The Red-eye reduction function uses the camera’s red-eye reduction lamp, which gently shines into the subject’s eyes to constrict the pupils and thereby reduces the likelihood that red-eye will occur.
Using the Built-in Flash FE Lock FE (flash exposure) Lock obtains and locks the correct flash exposure reading for any part of a subject. FE Lock is a function in the Creative zone. 1 Make sure the < > icon in the viewfinder is on. 2 3 Focus on the subject. ● In the Creative zone, press the < > button to pop up the built-in flash. ● Focus on the subject you want to lock the flash exposure on. Place the center AF point over the subject, and press the < > button.
Using the Built-in Flash Flash Exposure Compensation The EOS D60 camera can adjust the level of the built-in flash or any EX-series Speedlite. The compensation amount can be up to +/–2 stops in 1/2-stop increments. You cannot use flash exposure compensation in the Basic Zone. 1 Press the < > button. ( 2 Set the exposure compensation amount. 6) Decreased exposure Increased exposure ● Once set, the exposure compensation amount remains in memory after the Main Switch is set to .
Flash Photography with the EOS-Dedicated 550EX Speedlite The Canon 550EX Speedlite allows you to take high-quality flash pictures easily, in the same way as you would with a built-in flash. ● E-TTL Autoflash E-TTL autoflash (preflash evaluative metering in memory) supplies the correct level of flash for the subject in the AF point selected by AF.
Flash Photography with the EOS-Dedicated 550EX Speedlite Full Auto Flash Using the < > (Program AE) mode with E-TTL autoflash is described below. Regarding the operation of the 550EX, refer to the Speedlite's instructions. MODE PILOT SELEC H 1 2 3 Set the Mode Dial to < >. Make sure the 550EX Speedlite’s pilot lamp is on. Focus the subject, and take the picture. ● Make sure the flash-ready indicator < > is on, and check the shutter speed and aperture value before taking the picture.
Flash Photography with the EOS-Dedicated 550EX Speedlite High-Speed Sync (FP Flash) When the 550EX Speedlite is set to high-speed sync < > mode, it can automatically synchronize at any shutter speed of 1/200 second or faster, thus providing high-speed sync (FP) flash operation. When high-speed sync is On, the < > icon appears in the viewfinder.
Flash Photography with the EOS-Dedicated 550EX Speedlite FE Lock The procedure for setting FE lock is the same as with the built-in flash (→90). FE lock works in both the normal flash and high-speed sync (FP flash) modes. Flash Exposure Compensation For flash pictures with flash exposure compensation, see “Flash Exposure Compensation” for the built-in flash. (→91) Modeling Flash Modeling flash allows you to see shadows, light balance, and other effects produced by multilight settings.
Using Non-Canon Flash Units Sync Speed The EOS D60 can synchronize with compact, non-Canon flash units at shutter speeds of 1/ 200 second or slower. With larger studio flash units, the flash speed is 1/60 second or slower. Be sure to test the flash you are using beforehand, to make sure it synchronizes properly with the camera. PC Terminal We recommend you use a flash with sync cable connected to the PC contacts. The PC terminal has a locking thread to prevent accidental disconnection.
Playing and Erasing Recorded Images 5 This section explains how to view the images you have recorded with the EOS D60, how to erase images, and how to make settings for Digital Print Order Format (DPOF) printers or photo lab printing services. This section also describes how to connect the EOS D60 to a television and how to set the date and time.
Viewing Recorded Images The EOS D60 can display recorded images on its LCD monitor. You can view these images in > button to switch single-image format, index format, or enlarged format. Press the < formats. Viewing a Single Image 1 2 Check the image. ● Press the < > button. ➡ The most recent single image taken by the camera appears. ● Press the < > button again to clear the LCD monitor and exit PLAY. Change the displayed image.
Viewing Recorded Images Viewing Enlarged Images Recorded images can be enlarged approximately 3×. 1 2 Select the image you want to enlarge from a single-image or index display. (→98) Enlarge the image. 3 Change the display area. Part to be enlarged ● Press the < > button twice from a single-image display, or once from an index display. ➡ The selected image is enlarged approximately 3×. ➡ The central part of the image is displayed first.
Viewing Recorded Images INFO. Turning the Information Display On and Off When an image is displayed on the LCD monitor, you can press the button to view information about that image. Image information is available only for single-image displays.
Viewing Recorded Images Automated Playback of Recorded Images (Auto playback) This function automatically and continuously displays all images recorded on the CF card. Each image is displayed for approximately 3 seconds. 1 From the menu, select [Auto playback]. 2 Start auto playback. ● Press the < MENU> button. ● Turn the < > dial to select [Auto playback]. ● During auto playback, the Auto power off function (→29, 120) does not operate.
Viewing Recorded Images Rotating an Image The Rotate function can rotate an image 90° clockwise or counterclockwise. This allows you to play images with the correct orientation. Rotate pictures taken with the camera grip on the bottom 90° clockwise Rotate pictures taken with the camera grip on the top 90° counterclockwise 1 From the menu, select [Rotate]. 2 Go to Rotate mode. 3 Rotate the image. ● Press the < MENU> button. ● Turn the < > dial to select [Rotate]. ● Press the < > button.
Protecting an Image You can erase-protect images to prevent accidental erasure. > button to switch between single-image and index display in order to You can press the < protect individual pictures. > icon From the menu, select [Protect]. 2 Open the Protect Settings screen. 3 Protect the image. ● Press the < MENU> button. ● Turn the < > dial to select [Protect]. ● Press the < > button. ➡ The display goes to the Protect Settings screen.
Erasing Images (All Image Erase) You can erase images one image at a time, or you can erase all images on the CF card at once. This section describes how to erase all the images recorded on a CF card in one operation. To erase images one at a time, see “Erasing a Recorded Image (Single Image Erase)”. (→43) 1 2 3 Set the camera to PLAY. (→98) ● Press the < > button. ➡ The latest picture taken will be displayed. Press the < > button. ➡ The Erase menu appears.
Formatting the CF Card The CF card must be formatted before it is used in the EOS D60 camera. Also, if you see the ” (CF card error) on the LCD panel when you load a CF card, the CF card message “ may need to be formatted before it can be used. 1 From the Menu, select [Format]. 2 Press the < 3 Turn the < > dial to select [OK], then press the < > button. ● Press the < MENU> button. ● Turn the < > dial to select [Format]. > button.
Print Order You can mark the images on a CF card for printing, as well as specify the number of prints, print type, and the image data (date and file no.). The print specifications for the Canon EOS D60 camera conform to the Print Order Format (DPOF) standard. DPOF DPOF (Digital Print Order Format) is a standard used to record (on the CF card or other recording media) the image number, number of prints, etc. of images taken by digital cameras.
Print Order Selecting Images for Printing There are two ways to select images for printing. You can select images one at a time, or select all images. Selecting a Single Image 1 From the menu, select [Print Order]. 2 Press the < 3 Press the < 4 Select the images. ● Press the < MENU> button. ● Turn the < > dial to select [Print Order]. > button. ➡ The Print Order screen appears. ➡ [Order] is selected. 5 ➡ The Select Image screen appears.
Print Order Number of prints of the selected image 5 Select the print quantity. ● If the Print Type (→109) is [Index], you can not specify the print quantity. ● Turn the < > dial to select the quantity, then press the < > button. ➡ The quantity appears next to the < > icon. ● To cancel the selection, set the quantity to [ 0 ]. ● To select another image, repeat steps 4 and 5. ● Press the < MENU> button to return to the Select Image screen.
Print Order Print Type You can specify the following print types. Standard: Prints one image to each sheet. Index: Prints an index of the images in reduced size, on one sheet. Both: Prints the individual images and an index sheet. 1 Follow steps 1 and 2 of the Selecting a Single Image procedure (→107), to display the Print Order screen. 2 Turn the < > dial to select [Set up], then press the < > button. 3 Turn the < > dial to select [Print Type], then press the < > button. 4 Select the print type.
Print Order Specifying Date Printing You can specify printing of the date and time on each image. 1 Follow steps 1 and 2 of the Selecting a Single Image procedure (→107), to display the Print Order screen. 2 Turn the < > dial to select [Set up], then press the < > button. 3 Turn the < > dial to select [Date], then press the < > button. 4 Specify date printing. ➡ The Print Order Setting screen appears. ● Turn the < > dial to select [On] or [Off], then press the < > button.
Print Order Specifying File Number Printing You can specify printing of file number information on each image. 1 Follow steps 1 and 2 of the Selecting a Single Image procedure (→107), to display the Print Order screen. 2 Turn the < > dial to select [Set up], then press the < > button. 3 Turn the < > dial to select [File No.], then press the < > button. ➡ The Print Order Setting screen appears. 5 ● Turn the < > dial to select [On] or [Off], then press the < > button.
Connecting to a TV You can connect the EOS D60 to a television (using the video cable provided with your camera) to display your recorded images. Always turn off the camera and the television before connecting or disconnecting them. 1 Open the cover. 2 Connect the cable. 3 4 Turn the TV on, and set the input switch to Video In. 5 Press the < ● Connect the cable to the VIDEO OUT terminal on the camera and to the video input terminal on the TV.
Replacing the Date/Time Battery When the date/time back-up battery level is low, “ ” will appear on the LCD panel. Replace the CR2025 lithium battery as follows. If you replace the backup battery while the camera is connected to a battery pack with power remaining or to a DC coupler, the date, time, and other menu functions will retain their settings. 1 2 Set the Main Switch to .
File Numbering System The pictures you take are automatically assigned file numbers from 0001 to 9900 and stored in folders of 100 images each. Each folder on the CF card is numbered from 100 to 998.
Cleaning the CMOS Imaging Element The imaging element corresponds to the film in a film camera. If dirt or foreign matter gets on this imaging element, black spots may be recorded on the corresponding part of the image. If this happens, use the procedure below to clean the imaging element. Because the imaging element is very sensitive, we strongly recommend that you have the cleaning done by Canon service representatives.
Cleaning the CMOS Imaging Element 5 Select [1: Enable]. 6 Press the shutter button down fully. 7 Clean the imaging element. 8 Finish cleaning. ● Turn the < > dial to select [1: Enable], then press the < > button. ” appears on the ➡ The message “ LCD panel. ● If “ ” is blinking on the LCD panel, set the Main Switch to < OFF> and remove the battery pack. Then repeat the procedure from Step1. ● The reflex mirror of the camera then flips up, and the shutter opens.
Menu Function Settings 6 You can make a variety of settings from the EOS D60’s menu. The menu includes special settings called Custom Functions that are related to camera operation. This booklet indicates these settings mark, and provides basic descriptions. with the This chapter lists the EOS D60’s menu functions and describes the use of the Custom Function settings. For Menu operations and default settings, see “Menu Functions and Settings” (→32, 33).
List of Menu Functions Description See page Quality Item Sets the size in pixels of the image as recorded on the CF card, as well as the compression ratio. Select Large < >, Large < >, Medium < >, Medium < >, Small < >, Small < >, or RAW. 50 Red-eye reduction function Turns off/on a function for reducing the “red-eye” look caused by using a flash to shoot people at night or in dark settings.
List of Menu Functions Item Screen Description See page Custom WB Selects the image to use as the basis for custom white balance adjustments. 66 Parameters Besides the standard processing parameters applied automatically by the camera, up to three sets of processing parameters can be set and saved. 52 Protect Allows the user to protect image files against accidental erasure. 103 Rotate Rotates the image display 90° clockwise or counterclockwise.
List of Menu Functions Description See page Auto power off Item To conserve battery power, sets the Auto power off function that automatically switches off power if there is no operation for a given time. Select 1, 2, 4, 8, 15, or 30 minutes, or Off. 29 Review Determines whether images appear on the LCD monitor after they are taken. Select On, On (Info), or Off. The display time is set by the Review time setting (below).
List of Menu Functions Description See page Language Item Screen Sets the language used for the Menu screen. Select English, Deutsch, Français, or Japanese. – Video system Determines the video system format. Select NTSC or PAL. 112 Format CF card Formats the CF card in the camera. 105 Custom Functions Sets Custom Functions that can adjust many of the camera functions to meet individual requirements. 122 Custom Function default setting Resets all Custom Functions to the default settings.
List of Menu Functions Custom Function Settings You can adjust many of the Canon EOS D60’s functions to meet your particular requirements using the Custom Function settings. To change Custom Functions, select [C.Fn] from the menu. Func. No. Item 01 Unused 02 Shutter button / AE lock button Screen Select no.
List of Menu Functions Effects, remarks See page 80 Effective for determining focus and exposure separately. In AI Servo AF mode, if an object passes between the camera and the subject, you can press the < > button to pause AF operation and keep the camera from focusing on the obstruction. Exposure is determined when you take the picture. This is useful when capturing subjects that move and stop repeatedly. In AI Servo AF mode you can press the < > button to start or stop AI Servo AF operation.
List of Menu Functions Func. No. Item 06 Shutter speed in Av mode with flash 0 1 Automatic setting Fixed at 1/200 second (when using flash) 07 AEB sequence / auto cancellaton 0 0 → – → +/Enable 1 0 → – → +/Disable 2 – → 0 → +/Enable 3 – → 0 → +/Disable 0 1st-curtain sync. Flash fires immediately after the shutter reaches full-open position. 2nd-curtain sync. Flash fires immediately before 2nd curtain closes. 08 Shutter curtain sync Screen Select no. 1 09 Lens AF stop button Fn.
List of Menu Functions Effects, remarks See page Effective for using flash at night or in dark locations 73 93 The first AEB shot will be taken at the standard exposure. The AEB setting will be saved even when you turn off the main switch, change lenses, or replace the battery or CF card. The AEB shots will be taken starting with the decreased exposure. 79 The AEB shots will be taken starting with the decreased exposure.
List of Menu Functions Func. No. Item 11 Menu button return position Screen Select no. Setting or change 0 1 Always show first menu item. Show the most recently set menu item. (Set the Main Switch to Off to cancel, or On to show the first menu item.) Show the most recently set menu item. (Retain in memory when the main switch is set to Off.) 2 12 SET button func.
List of Menu Functions Effects, remarks See page – Enables prompt menu selection for items that are frequently changed. Enables prompt menu selection for items that are frequently changed. Convenient when you want to retain function settings, regardless of whether the power is On or Off. Lets you change quality quickly when you are shooting. 50 Lets you change ISO speed quickly when you are shooting. 51 Lets you change parameters quickly when you are shooting.
REFERENCE Basic Terminology AE Auto Exposure is a function that calculates the exposure automatically. The camera has a built-in exposure meter that automatically determines the correct exposure (the combination of shutter speed and aperture value). AF Auto Focus is a function that focuses the camera automatically. Aperture value The lens aperture opens and closes to control the amount of light that reaches the imaging element.
REFERENCE Depth of field Point of optimum focus 1 Aperture value set to f/22 2 Aperture value set to f/2 DPOF Digital Print Order Format is a standard format for ordering prints of digital camera images from photo lab printing services, as well as printing from household printers. The Canon EOS D60 is DPOF-compatible. You can specify printing from the camera itself and store the order information on the CF card.
REFERENCE Firmware This is software containing various camera control instructions. The EOS D60 uses the firmware for image capture and image processing. Although the firmware is preinstalled in the camera, you can later install the latest version of the firmware when it becomes available on Canon’s Web site. Format Formatting a CF card is the process of preparing the CF card to store image data. Be careful when formatting a CF card, because the formatting process erases all data stored on the card.
REFERENCE Function Availability Table Mode Dial Mode Dial AF AF point selection ONE SHOT AI SERVO AI FOCUS Built-in flash Auto : Automatic setting : Selection possible Red-eye Manual reduction Auto Manual Drive Single White balance Auto Metering mode Continuous Evaluative Partial Centerweighted average Quality Manual Large Large Medium Medium Small Small RAW 7 Reference AF Modes and Drive Modes Drive mode Single Continuous ONE SHOT AF AI Servo AF An image cannot be taken unle
REFERENCE Exposure Warnings Mode Blinking warning Description Remarks Subject is too dark. 1) Increase the ISO speed. 2) Use flash. Subject is too bright. 1) Decrease the ISO speed. 2) Use a neutral density filter. Picture will be underexposed. 1) Turn the < > dial to a slower shutter speed. 2) Increase the ISO speed. Picture will be overexposed. 1) Turn the < > dial to a faster shutter speed. 2) Decrease the ISO speed. Picture will be underexposed.
REFERENCE AE Lock Effects for Combinations of AF Point Selection and Metering Method (when using a mode in the Creative zone) AF point selection Metering method Auto selection AF Manual selection AF Evaluative metering AE lock applied to the metered value at the active AF point. AE lock applied to the metered value at the selected AF point. Partial metering Center-weighted average AE lock applied to the metered value at the center AF point.
REFERENCE Shutter Speed and Aperture Value Readouts Shutter speed readout The shutter speed is normally displayed in 1/2-stop increments. Numbers from to denote the denominator of the shutter speed fraction: for example, is 1/125 seconds. In is 0.3 seconds, and is 15 seconds. addition, Aperture value readout The aperture value is normally displayed in 1/2-stop increments. The larger the number, the smaller the aperture opening. The range of aperture values (f/numbers) displayed depends on the lens used.
REFERENCE Message List The following messages are displayed on the LCD monitor. Busy. A picture is being stored on the CF card, or the camera is loading a recorded image. No CF card Attempted to take a picture or play an image with no CF card in the camera. CF card error. There is a problem with the CF card. CF card full. No more print orders can be stored. Naming error! A file already exists with the file name that the camera is attempting to create.
REFERENCE Troubleshooting If you have a problem with your camera, first refer to this Troubleshooting Guide as you check the camera. Power Unable to charge battery pack. An incorrect battery pack is being used. ➡Use Battery Pack BP-511. (→3) Battery pack is not correctly attached to the compact power adapter. ➡ Attach the battery pack correctly. (→22) The DC coupler is connected to the compact power adapter. ➡ Remove the DC coupler plug from the compact power adapter.
REFERENCE Shooting Unable to shoot or record images CF card is not loaded correctly. ➡ Load the CF card correctly. (→28) CF card is full. ➡ Change to a new CF card, or erase unwanted images. (→28, 43, 104) The battery pack is out of power. ➡ Charge the battery pack. (→22) Image out of focus (In-focus light in the viewfinder blinks). ➡ Press the shutter button down halfway to focus again. If this fails, focus manually.
REFERENCE Major Accessories (Optional) Battery Pack BP-511 This is a powerful lithium ion rechargeable battery pack. The rated voltage is 7.4V. You can use the Compact Power Adapter CA-PS400 to charge the BP-511 battery pack, and when fully charged it has enough power for you to take approximately 490 images (Normal, with 50% flash use). Charging takes about 90 minutes. Battery Grip BG-ED3 This is a battery grip that holds two BP-511 battery packs.
REFERENCE Timer Remote Controller TC-80N3 The remote controller attaches with an 80-cm cord and includes built-in (1) self timer, (2) interval timer, (3) longexposure timer, and (4) shutter release count-setting function. You can set the time from 1 second to 99 hours, 59 minutes, 59 seconds, in 1-second increments. Also includes shutter release lock and a one-touch locking plug for connecting to the EOS D60’s remote control terminal.
REFERENCE System Map Eyecup Eb ST-E2 220EX 420EX 550EX MR-14EX MT-24EX Rubber Frame Eb E-series Dioptric Adjustment Lenses Items included with the Camera Eyepiece Extender EP-EX15 Strap Angle Finder C Date/time CR2025 lithium battery DC Coupler DR-400 Compact Power Adapter CA-PS400 Battery Pack BP-511 Battery Pack BP-511 140 Battery Grip BG-ED3 Timer Remote Controller TC-80N3 EF Lens Remote Switch RS-80N3 Wireless Controller LC-4
REFERENCE CF Cards CF Card Reader • EOS Digital Solution Disk • Adobe Photoshop LE Disk PC Card Adapter PC Card Slot USB Port Macintosh Computer Interface Cable IFC-200 PCU PC Card Slot Parallel Port 7 USB Port Reference PC/AT Compatible Computer Video Cable VC-100 TV/Video 141
REFERENCE Major Specifications • Type Type ......................................... Digital AF/AE SLR camera with built-in flash Recording medium .................. Type I and II CF card Image size ................................ 22.7 mm × 15.1 mm Compatible lenses .................... Canon EF lenses (Effective lens focal length: 1.6 times the lens focal length) Lens mount .............................. Canon EF mount • Imaging Element Type .........................................
REFERENCE Viewfinder information ..............
REFERENCE Self-timer .................................. 10-sec. delay. Remote control ......................... Compatible with Remote Switch RS-80N3 • Built-in Flash Type ......................................... Auto pop-up E-TTL autoflash (retractable) Guide No. ................................. 12 (ISO 100, meters)/ 39 (ISO 100, ft.) Recycling time .......................... Approx. 3 sec. Flash-ready indicator ............... Flash-ready icon lights in viewfinder Flash coverage .....................
REFERENCE • Power Source Battery ...................................... One Battery Pack BP-511 * AC power can be supplied via the DC coupler. Battery life ................................ Normal temp. Low temp. No flash use 620 shots 480 shots 50% flash use 490 shots 400 shots * The above figures apply when a fully-charged Battery Pack BP-511 is used. Battery check ........................... Automatic, displayed in one of three levels Power saving ............................ Provided.
Index A Accessories ........................................... 138 A-DEP ..................................................... 76 AE ......................................................... 128 AEB (Autoexposure bracketing) .............. 78 AE lock ............................................ 80, 133 AF .................................................... 27,128 AF Assist-beam ....................................... 39 AF Mode ................................................. 54 AF point ................
Index Thank you for purchasing this Canon product The EOS D60 digital camera is a high-performance, single-lens reflex AF camera with an ultrafine CMOS sensor having 6.29 million effective pixels. The camera is compatible with all Canon EF lenses and designed for quick and easy shooting. It is full-featured for all types of photography, from fully automatic snapshooting to professional-level, creative work. CompactFlash cards (CF Type I and II) serve as the recording medium.
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A. INC. For all inquiries concerning this camera, call toll free in the U.S. 1-800-OK-CANON or write to: Customer Relations, Canon U.S.A., Inc. One Canon Plaza, Lake Success, N.Y. 11042-1198 CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E.