User Manual

86
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
Adjusting the Flash Output
Still Images Movies
Choose from the three ash levels in [ ][ ][ ] modes.
1
Set the ash mode to [Manual ash].
● Press the [ ] button and choose
[Flash Control] on the [ 3] tab. In [Built-
in ash settings], set [Flash Mode] to
[Manual ash] (
=
32).
2
Congure the setting.
● Raise the ash, press the [ ] button and
immediately turn the [ ] dial to choose
the ash level, and then press the [ ]
button.
● Once the setting is complete, the ash
output level is displayed.
[ ]: Minimum, [ ]: Medium, [ ]:
Maximum
● You can also set the ash level by accessing MENU (
=
32)
and choosing [
3] tab > [Flash Control] > [Built-in ash settings]
> [
ash output].
● You can also access the [Flash Control] screen (
=
32) when
the ash is up by pressing the [
] button and immediately
pressing the [
] button.
● You can also access the [Flash Control] screen (
=
32) by
pressing the [
] button and touching [ ].
● The ISO speed is determined and screen
brightness changes when you press
the shutter button halfway after setting
the ISO speed to [AUTO]. If standard
exposure cannot be obtained with your
specied shutter speed and aperture
value, the ISO speed is displayed in
orange.
● After you set the shutter speed and aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
● When the ISO speed is xed, screen brightness may change
depending on your specied shutter speed and aperture value.
However, screen brightness remains the same when the ash is
up and the mode is set to [
].
● Image brightness may be affected by the Auto Lighting Optimizer
(
=
66). To keep the Auto Lighting Optimizer disabled in [ ]
mode, touch [
] on the Auto Lighting Optimizer setting screen to
add a [
] mark to [Disable during man expo].
● [ ]: Manual
● Calculation of standard exposure is based on the specied
metering method (
=
64).
● The following operations are available when ISO speed is set to
[AUTO].
- Turn the [ ] dial when [ ] is shown on the exposure
compensation bar in step 2 to adjust exposure.
- Press the [ ] button to lock the ISO speed. Screen brightness
changes accordingly.
● You can also adjust the setting items on the bottom of the screen
by touching an item to select it and then either touching/dragging
the bar or touching [
][ ].