User Manual

89
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
● To cancel all changes on the [ 1] tab and restore defaults,
choose [Clear all Custom Func. (C.Fn)] on the screen in step 1
and press the [
] button.
● [H] is not available when [Highlight tone priority] is set to [D+]
(
=
66), even with [ISO expansion] set to [1:Enable].
● Safety shift is disabled when the ash res.
● AF-assist beam: Light from the front lamp when the shutter
button is pressed halfway in low-light conditions, which assists in
focusing.
● Automatic lens retraction when powered off is available for lenses
that support this feature.
Type of
Function
Function Description
Exposure
ISO expansion
Set to [1:Enable] for the option of
setting the ISO speed to [H]. [H]
corresponds to ISO 25600, or in [
]
mode, ISO 12800.
Safety shift
Set to [1:Enable] for automatic
adjustment of the shutter speed and
aperture value to bring the exposure
level closer to standard exposure
if standard exposure would not
be available otherwise under your
specied shutter speed or aperture
value in [
] or [ ] mode.
Autofocus
AF-assist beam
(LED) ring
Set to [1:Disable] to disable the AF-
assist beam.
Others
Custom Controls
Assign commonly used functions to
specic buttons (
=
90).
Release shutter
w/o lens
Set to [1:Enable] to enable shooting
without a lens attached, either by
pressing the shutter button or movie
button.
Retract lens on
power off
Specify whether the lens should be
retracted automatically when you
turn the camera off.