User Manual

97
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
Using the Front Dial to Jump between Images
Still Images Movies
Use the front dial to nd and jump between desired images quickly by
ltering image display according to your specied conditions.
Displays images you have rated (
=
105).
Jumps to the rst image in each group of
images that were shot on the same date.
Jumps by 10 images at a time.
Jumps by 100 images at a time.
1
Choose a condition.
● In single-image display, drag left or right
with two ngers.
● Press the [ ][ ] buttons on the screen at
left to choose a condition (or jump method).
2
View images matching your
specied condition, or jump by the
specied amount.
● Turn the [ ] dial to view only images
matching the condition or jump by the
specied number of images forward or
back.
● The conditions [ ], [ ], [ ], [ ], or [ ] are displayed only when
some images have these ratings. Similarly, the conditions [
] or
[
] are displayed only when some images have these ratings.
● Use [ ] to jump between images with any rating.
3
View the ltered images.
● Images matching your conditions are
displayed in yellow frames. To view only
these images, press the [ ][ ] buttons.
● To cancel ltered display, press the [ ]
button, choose [ ] in the menu, and
then press the [ ] button.
● When the camera has found no corresponding images for some
conditions, those conditions will not be available.
● Options for viewing the images found (in step 3) include
“Navigating through Images in an Index” (
=
95), “Magnifying
Images” (
=
98), and “Viewing Slideshows” (
=
99). You can
also apply image operations to all images found, by choosing
[Protect All Images in Search] in “Protecting Images” (
=
99) or
[Select All Images in Search] in “Erasing Multiple Images at Once”
(
=
102), “Adding Images to the Print List (DPOF)” (
=
158), or
“Adding Images to a Photobook” (
=
160).
● If you edit images and save them as new images (
=
106 –
=
108), a message is displayed, and the images that were
found are no longer shown.
● The same operations are available by pressing the [ ]
button and choosing [
1] tab > [Image Search].
● You can also choose conditions by touching the screens in steps
1 and 2.