User manual

480
Troubleshooting Guide
The image is out of focus or blurred.
z
Set [
z
: Focus mode] to [AF] (
=
182).
z
When using a lens with a focus mode switch, set the switch to <AF>
(
=
55).
z
Press the shutter button gently to prevent camera shake (
=
57).
z
In [
z
: IS settings], set [IS mode] to [On] (
=
188).
z
When using a lens with an Image Stabilizer switch, set the switch to
<
1
> (
=
188).
z
In low light, the shutter speed may become slow. Use a faster shutter
speed (
=
106), set a higher ISO speed (
=
138), use ash (
=
243),
or use a tripod.
z
See “Minimizing Blurred Photos” on
=
75.
I cannot lock the focus and recompose the shot.
z
Set the AF operation to One-Shot AF. Shooting with the focus locked is
not possible with Servo AF (
=
76,
=
167).
The continuous shooting speed is slow.
z
The continuous shooting speed for continuous shooting may be lower,
depending on conditions such as these: battery level, temperature,
shutter speed, aperture, subject conditions, brightness, AF operation,
type of lens, use of ash, and shooting settings (
=
134).