User manual
481
Troubleshooting Guide
The maximum burst during continuous shooting is lower.
z
If you shoot a subject that has ne detail such as a eld of grass, the le
size will be larger, and the actual maximum burst may be lower than the
number listed on
=
495.
Even after I change the card, the maximum burst displayed for
continuous shooting does not change.
z
The maximum burst displayed does not change when you switch cards,
even if you switch to a high-speed card. The maximum burst shown
in the table on
=
495 is based on Canon’s testing card. (The faster
the card’s writing speed, the higher the actual maximum burst will be.)
For this reason, the maximum burst displayed may dier from the actual
maximum burst.
Even if I set a decreased exposure compensation, the image
comes out bright.
z
Set [
z
: Auto Lighting Optimizer] to [Disable] (
=
141). When [Low],
[Standard], or [High] is set, even if you set a decreased exposure
compensation or ash exposure compensation, the image may come out
bright.
ISO 100 cannot be set. ISO speed expansion cannot be selected.
z
When [
z
: Highlight tone priority] is set to [Enable] or [Enhanced],
the available ISO speed range starts at ISO 200.
z
When [
z
: Highlight tone priority] is set to [Enable] or [Enhanced],
H (expanded ISO speed) is not available, even with [ISO expansion] in
[
5
: Custom Functions(C.Fn)] set to [1: On].
z
When [
z
: Highlight tone priority] is set to [Disable], you can set ISO
100/125/160 or H (expanded ISO speed).