User manual

484
Troubleshooting Guide
Movie recording stops by itself.
z
If the card’s writing speed is slow, movie recording may stop
automatically. For cards that can record movies, see
=
497. To nd out
the card’s writing speed, refer to the card manufacturer’s website, etc.
z
If you record a 4K movie for 9 min. 59 sec. or a Full HD/HD movie for
29 min. 59 sec., the movie recording stops automatically.
The ISO speed cannot be set for movie recording.
z
ISO speed is set automatically in [
k
] recording mode. In [
M
] mode,
you can manually set the ISO speed (
=
499).
ISO 100 cannot be set or ISO speed expansion cannot be
selected during movie recording.
z
When [
z
: Highlight tone priority] is set to [Enable], the available ISO
speed range starts at ISO 200.
z
H (expanded ISO speed) is not available when [
z
: Highlight tone
priority] is set to [Enable], even with [ISO expansion] in [
5
: Custom
Functions(C.Fn)] set to [1: On].
z
When [
z
: Highlight tone priority] is set to [Disable], you can set ISO
100/125/160 or H (expanded ISO speed).
z
H (expanded ISO speed) is not available (not displayed) in 4K movie
recording.