User manual

111
Manual Exposure Mode (M)
Exposure Compensation with ISO Auto
If the ISO speed is set to [AUTO] for manual exposure shooting, you can
set exposure compensation (
=
140) as follows:
z
Touch the exposure level indicator
z
[
z
: Expo.comp./AEB]
z
Quick Control screen
z
If ISO Auto is set, the ISO speed setting will change to obtain the standard
exposure with the set shutter speed and aperture. Therefore, you may
not obtain the desired exposure e󰀨ect. In this case, set the exposure
compensation.
z
With the camera set to the <
a
> mode + ISO Auto + [
q
] (Evaluative metering)
and [
8
: C.Fn I-7: AE lock meter. mode after focus] set to the default setting
(
=
531), holding down the shutter button halfway will lock the ISO speed after
focus is achieved with One-Shot AF.
z
When ISO Auto is set, you can press the <
A
> button to lock the ISO speed.
z
To compare the current exposure to the exposure when you pressed the
<
A
> button initially with a manually set ISO speed, press the <
A
> button,
recompose the shot, and check the exposure level indicator.
z
With ISO Auto set and [
8
: C.Fn I-1: Exposure level increments] set to
[1/2-stop], any 1/2-stop exposure compensation will be implemented with the
ISO speed (1/3 stop) and shutter speed. However, the shutter speed displayed
will not change.