User manual
558
Troubleshooting Guide
[Does this battery/do these batteries display the Canon logo?] is
displayed.
z
Do not use any battery packs other than a genuine Canon Battery Pack
LP-E17.
z
Remove and install the battery again (
=
42).
z
If the electrical contacts are dirty, use a soft cloth to clean them.
The battery becomes exhausted quickly.
z
Use a fully charged battery (
=
40).
z
The battery performance may have degraded. If the battery performance
is poor, replace the battery with a new one.
z
The number of possible shots will decrease with any of the following
operations:
z
Pressing the shutter button halfway for a prolonged period.
z
Activating the AF frequently without taking a picture.
z
Using the lens’s Image Stabilizer.
z
Using the Wi-Fi/Bluetooth (wireless communication) function.
The camera turns o by itself.
z
Auto power o is in eect. To deactivate auto power o, set [Auto power
o] under [
5
: Power saving] to [Disable] (
=
495).
z
Even if [Auto power o] is set to [Disable], the screen will still turn
o after the camera is left idle for the time set in [Display o], but the
camera will remain on.
z
Set [
5
: Eco mode] to [O].