Advanced User Guide E CT2-D147-A © CANON INC.
Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Compatible Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Instruction Manuals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Quick Start Guide. . . . . . . . . . . . . . . . . . . . . .
Av: Aperture-Priority AE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 M: Manual Exposure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 BULB: Long (Bulb) Exposures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Shooting and Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 Still Photo Shooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Silent Shutter Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279 Shutter Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280 Releasing Shutter without Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282 Image Stabilizer (IS Mode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283 Customizing Quick Controls. . . . . . . . . . . . . . . . . . . . . . . . .
Other Menu Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390 General Movie Recording Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401 AF/Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404 Tab Menus: AF (Still Photos). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405 Tab Menus: AF (Movie Recording). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resizing JPEG/HEIF Images. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 565 Cropping JPEG/HEIF Images. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 567 Converting HEIF to JPEG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 570 Slide Show. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 572 Setting Image Search Conditions. . . . . . . . . . . . . . . . . . . . . . . . . .
Resetting Communication Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 839 Set-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 840 Tab Menus: Set-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 841 Selecting Cards for Recording/Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . 844 Folder Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 910 Copyright Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 912 System Status Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 915 Other Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 919 Custom Functions/My Menu. . . . . . . . . . . . . . . . . . . . .
Introduction Before starting to shoot, be sure to read the following To avoid shooting problems and accidents, first read the Safety Instructions and Handling Precautions. Also read this Advanced User Guide carefully to ensure that you use the camera correctly. Take some test shots, and understand about product liability After shooting, play images back and check whether they have been properly recorded.
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your dealer.
Cable Protector The camera does not come with a memory card ( ) or HDMI cable. Attach Eyecup ER-h to the viewfinder eyepiece. Be careful not to lose any of these items. No software CD-ROM is included. Software ( ) can be downloaded from the Canon website. Caution The transmission rate when the included interface cable is used is equivalent to SuperSpeed USB (USB 3.1 Gen 1).
Compatible Accessories Check the following website for details on compatible accessories. https://cam.start.
Instruction Manuals The included Instruction Manual provides basic camera instructions. Advanced User Guide Complete instructions are provided in this Advanced User Guide. For the latest Advanced User Guide, refer to the following website. https://cam.start.canon/C010/ Lens Instruction Manuals View or download from the following website. https://cam.start.canon/ For software instruction manuals, see Software Instruction Manuals.
Quick Start Guide 1. Insert the battery ( ). Upon purchase, charge the battery to start using ( 2. Insert the card ( ). ). You can insert two cards. 3. Attach the lens ( ). Align the red mount index on the lens with the red mount index on the camera to attach the lens.
4. Set the lens's focus mode switch to < 5. Set the power switch to < 6. Flip out the screen ( >( >( ). ). ). When the date/time/zone setting screen is displayed, see Date/Time/ Zone.
7. Set the shooting mode to [ Press the < ]( ). > button, then turn the < 8. Focus on the subject ( > dial to select [ ]. ). A tracking frame [ ] appears over any face detected. Press the shutter button halfway, and the camera will focus on the subject. 9. Take the picture ( ). Press the shutter button completely to take the picture. By default, the camera shoots in [ ] mode ( ).
10. Review the picture. The image just captured will be displayed for approx. 2 sec. on the screen. To display the image again, press the < > button ( ).
About This Guide Icons in This Guide Basic Assumptions for Operational Instructions and Sample Photos Icons in This Guide > < < > > < Indicates the Main dial. Indicates Quick control dial 1. Indicates Quick control dial 2. < > Indicates the Multi-controller. < > Indicates the Smart controller. < > Indicates the lens control ring. < > Indicates the Set button. * Indicates the duration (in * seconds) of the operation for the button you pressed, as timed after you release the button.
Basic Assumptions for Operational Instructions and Sample Photos Before following any instructions, make sure the power switch is set to < >( ) and the Multi-function lock feature is off ( ). It is assumed that all the menu settings and Custom Functions are set to their defaults. Illustrations in this guide show the camera with the RF24-105mm F4 L IS USM lens attached as an example. Sample photos in this guide are only for illustration.
Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format it with this camera ( ). CFexpress cards * Type-B compatible SD/SDHC/SDXC memory cards * UHS-II and UHS-I cards compatible Cards That Can Record Movies When recording movies, use a card with ample performance (fast enough writing and reading speeds) for the movie recording quality ( ).
Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING : Denotes the risk of serious injury or death. Keep the product out of the reach of young children. A strap wrapped around a person's neck may result in strangulation. The parts or provided items of cameras or accessories are dangerous if swallowed. If swallowed, seek immediate medical assistance.
Observe the following instructions when using a battery charger or AC adapter. • Periodically remove any dust buildup from the power plug and power outlet using a dry cloth. • Do not plug in or unplug the product with wet hands. • Do not use the product if the power plug is not fully inserted into the power outlet. • Do not expose the power plug and terminals to dirt or let them come into contact with metallic pins or other metal objects.
CAUTION : Follow the cautions below. Otherwise physical injury or property damage may result. Do not fire the flash near the eyes. It may hurt the eyes. Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness. In such a case, stop using the product immediately and rest for a while before resuming use. Flash emits high temperatures when fired.
Handling Precautions Camera care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. To maximize the camera's dust- and drip- resistance, keep the terminal cover, battery compartment cap, card slot cover, and all other covers firmly closed. Also attach the shoe cover to the multi-function shoe.
Avoid storing the camera where there are chemicals that result in rust and corrosion such as in a chemical lab. If the camera has not been used for an extended period, test all its functions before using it. If you have not used the camera for some time or if there is an important shoot such as a foreign trip coming up, have the camera checked by your nearest Canon Service Center or check the camera yourself and make sure it is working properly.
Lens After detaching the lens from the camera, put down the lens with the rear end up and attach the rear lens cap to avoid scratching the lens surface and electrical contacts (1). Smudges on the image sensor Besides dust entering the camera from outside, in rare cases, lubricant from the camera's internal parts may adhere to the front of the sensor. If smudges are visible on images, have the sensor cleaned by a nearest Canon Service Center.
Part Names Attaching the Strap Using the Cable Protector (1) (9) (2) (10) (11 ) (12) (3) (13) (4) (14) (15) (5) (16) (6) (17) (18) (7) (19) (20) (8) (21) 27
(1) Self-timer lamp/AF-assist beam (2) Shutter button (3) Multi-function button 2 (M-Fn 2) (4) Depth-of-field preview button (5) Grip > Vertical-grip Multi-function button (6) < (7) < (8) Vertical-grip shutter button (9) RF lens mount index (10) Lens mount (11) Lens lock pin (12) Lens release button (13) Shutter curtain/Image sensor (14) Remote control terminal (15) Contacts (16) Vertical-grip depth-of-field preview button (17) Vertical-grip Multi-function button 2 (M-Fn 2)
(1) (2) (3) (4) (5) (6) (7) (8) (19) (20) (21) (22) (23) (24) (25) (26) (27) (9) (10) (11 ) (12) (13) (14) (28) (15) (29) (16) (30) (31) (32) (33) (17) (18) 29
(1) Eyecup (2) Multi-function shoe (3) Flash sync contacts (4) < (5) < (6) Microphone > Focal plane mark > Drive mode/AF operation selection button (7) < (8) Strap mount > Flash exposure compensation/metering mode selection button (9) < > External microphone IN terminal (10) < > Digital terminal (11) < (12) < (13) < (14) < > PC terminal (15) Terminal cover (16) Battery release handle (17) Battery (18) Battery compartment cap (19) LCD panel (20) < > LCD panel info
(10) (11 ) (12) (13) (14) (1) (15) (16) (2) (3) (17) (18) (19) (20) (4) (5) (6) (7) (8) (9) (21) (22) (23) (24) 31
(1) Viewfinder eyepiece (2) < (3) < (4) < > Set button (5) < > Quick control dial 1 (6) < (7) < (8) < > Magnify/reduce button (9) < > Erase button (10) Dioptric adjustment knob > Multi-controller (can also be pressed straight in) > Info button > Playback button > Network lamp > Still photo shooting/< > movie recording switch (11) < (12) < (13) < (14) Strap mount (15) Movie shooting button (16) Card slot 1 (17) Card slot 2 (18) Card slot cover (19) Card 1 eject bu
LCD panel information display Information displayed varies depending on camera status. For icon details, see Information Display. Viewfinder information display Information displayed varies depending on camera status.
Battery Charger LC-E19 Charger for Battery Pack LP-E19 ( ).
Attaching the Strap Pass the end of the strap through the strap mount from the bottom, then pass it through the strap buckle as shown. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
Using the Cable Protector When connecting the camera to a computer, use the included interface cable or a Canon cable. Use a commercially available HDMI cable when connecting the camera to a monitor or other display device. When connecting an interface cable, use the included cable protector. Using the cable protector helps prevent accidental disconnection and terminal damage. Preparation The cable protector consists of the protector (1) and a clamp (2). Attach the protector to the camera.
With the included interface cable and a slim commercially available HDMI cable 1. (3) Included interface cable 2.
3. 4. With an included or optional Canon interface cable and a thick commercially available HDMI cable 1.
2. (6) Thick commercially available HDMI cable With only an optional Canon interface cable or a commercially available HDMI cable When using only an optional Canon interface cable or a thick/slim commercially available HDMI cable, pass the cable through the clamp (2) as shown before attaching the clamp to the cable protector.
Caution Using the camera when an interface cable or HDMI cable is connected without the cable protector may damage the camera terminal. Make sure each cable is securely connected to the camera terminal.
Software Software Overview Downloading and Installing EOS Software or Other Dedicated Software Software Instruction Manuals Software Overview This section summarizes software used with EOS cameras. Note that downloading and installing the software requires an internet connection. The software cannot be downloaded or installed in environments without an internet connection.
Downloading and Installing EOS Software or Other Dedicated Software Always install the latest version of the software. Update any previous versions that are installed by overwriting them with the latest version. Caution Do not connect the camera to a computer before you install the software. The software will not be installed correctly. The software cannot be installed unless the computer is connected to the internet. Previous versions cannot display images from this camera correctly.
1. Download the software. Connect to the internet from a computer and access the following Canon website. https://cam.start.canon/ Select your country or region of residence and download the software. Depending on the software, you may need to enter the camera's serial number. The serial number is on the bottom of the camera. Decompress it on the computer. For Windows Click the displayed installer file to start the installer. For macOS A dmg file will be created and displayed.
Software Instruction Manuals Check the following website for software instruction manuals. https://cam.start.
Preparation and Basic Operations This chapter describes preparatory steps before you start shooting and the basic camera operations.
Charging the Battery 1. Connect and plug in the battery charger. Connect the power cord to the charger and plug the other end into a power outlet. All indicator lamps are off when no batteries are loaded. 2. Remove the protective cover. Remove the included protective covers from the charger and battery.
3. Charge the battery. Slide the battery in (in the opposite direction from protective cover removal) and make sure it is securely attached to the charger. You can load a battery into either slot or slot . Charging begins automatically, and the charge lamp blinks or lights up in green. Charging is finished when all three charge lamps (50%/80%/100%) are lit in green. Charging a depleted battery takes approx. 2 hr. and 50 min. at room temperature (23°C/73°F).
Upon purchase, the battery is not fully charged. Charge the battery before use. Charge the battery on the day before or on the day it is to be used. Charged batteries gradually lose their charge, even when they are not used. After charging the battery, remove it and disconnect the charger from the power outlet. When not using the battery or charger, reattach the included protective covers. Use the battery in an ambient temperature range of 0–45°C/32–113°F.
The < > lamp blinks. This display advises you to calibrate (discharge) the battery, which will enable accurate charging capacity determination and battery level display on the camera. When the < > lamp blinks in green, calibration is recommended. To charge the battery at this time, wait approx. 10 sec., and charging will begin automatically. To perform calibration, press the < > button while the < > lamp is blinking in green. The < > lamp now remains lit in green, and discharging begins.
Inserting/Removing Batteries Insertion Removal Insert a fully charged Battery Pack LP-E19 into the camera. Insertion 1. Remove the battery compartment cap. 2. Insert the battery. Insert the battery firmly, all the way in, then turn the battery release handle as shown by the arrow. Caution There may be a slight delay before the camera turns on when a battery is used in the camera for the first time. You cannot use batteries other than the Battery Pack LP-E19.
Note Wipe away any dirt on the battery's water-repellent rubber lining (1) with a moistened cotton swab.
Removal 1. Turn the battery release handle and remove the battery. Make sure the power switch is set to < >( ). Flip out the battery release handle, turn it as shown by the arrow, and remove the battery. To prevent short-circuits, always attach the included protective cover ( ) to the battery. When not using the camera, attach the battery compartment cap ( 52 ).
Inserting/Removing Cards Insertion Formatting the Card Removal This camera accepts two cards. Recording is possible as long as there is at least one card in the camera. With two cards inserted, you can select one card to record to, or you can record the same image to both cards at once ( ). Caution Make sure the SD card's write-protect switch (1) is set upward to enable writing and erasing. Insertion 1. Slide the cover to open it.
2. Insert the card. Card 1 (CFexpress card) Card 2 (SD card) The card in the rear card slot is [ ] (CFexpress card), and the one in front of it is [ ] (SD card). CFexpress card: With the card label facing you, insert the open side of the card (2) into the card slot. Inserting cards the wrong way may damage the camera. The card 1 eject button (gray) pops out. SD card: With the card label facing you, insert the card into the card slot until it clicks into place.
3. Close the cover. Close the cover and slide it in the direction shown by the arrows until it snaps shut.
4. Set the power switch to < >( ). (3) Card selection icon (4) Card 1 (CFexpress card) (5) Card 2 (SD card) Icons representing loaded cards are shown on the shooting screen ( ) accessed by pressing the < > button and on the Quick Control screen ( ). Cards labeled with [ ] are selected for recording.
Formatting the Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera ( ).
Removal 1. Open the cover. Set the power switch to < >. Check that the access lamp (1) is off, then open the cover. If [Saving...] is displayed on the screen, close the cover. 2. Remove the card. CFexpress card: Press the card 1 eject button (2) to eject the card. SD card: Gently press the card in, then release it to eject it. Pull the card straight out, then close the cover. Caution Do not remove cards immediately after a red [ ] icon is displayed as you are shooting.
Note The number of shots available varies depending on remaining card capacity and settings such as image quality and ISO speed. Setting [ : Release shutter without card] to [Disable] will prevent you from forgetting to insert a card ( ). Caution When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card slot cover during this time.
Using the Screen You can change the direction and angle of the screen. 1. Flip out the screen. 2. Rotate the screen. When the screen is out, you can tilt it up or down or rotate it to face the subject. Indicated angles are only approximate. 3. Face it toward you. Normally, use the camera with the screen facing you.
Caution Avoid forcing the screen into position as you rotate it, which puts undue pressure on the hinge. When a cable is connected to a camera terminal, the rotation angle range of the flipped-out screen will be limited. Note Keep the screen closed and facing the camera body when the camera is not in use. You can protect the screen. A mirror image (right/left reversed) of subjects is displayed when the screen faces subjects in front of the camera.
Turning on the Power Setting the Date, Time, and Time Zone Changing the Interface Language Automatic Sensor Cleaning Battery Level Indicator < > The camera turns on. < > The camera turns on. Multi-function locking is engaged ( ). < > The camera is turned off and does not function. Set the power switch to this position when not using the camera. Note If you set the power switch to < > while an image is being recorded to the card, [Saving...
Setting the Date, Time, and Time Zone If you turn on the camera and the date/time/zone setting screen appears, see Date/Time/ Zone to set the date/time/zone. Changing the Interface Language To change the interface language, see Language. Automatic Sensor Cleaning Whenever the power switch is set to < >, the sensor is cleaned automatically (which may make a faint sound). During the sensor cleaning, the screen will display [ ].
Battery Level Indicator When the power switch is set to < >, the battery level will be indicated. Display Level (%) 100–70 69–50 49–20 19–10 9–1 0 Note Doing any of the following will exhaust the battery faster: • Pressing the shutter button halfway for a prolonged period. • Activating the AF frequently without taking a picture. • Using the lens's Image Stabilizer. • Using Wi-Fi features. • Using the screen frequently. • Using accessories compatible with the multi-function shoe.
Attaching/Detaching RF Lenses Attaching a Lens Detaching a Lens Caution Do not look at the sun directly through any lens. Doing so may cause loss of vision. When attaching or detaching a lens, set the camera's power switch to < >. If the front part (focusing ring) of the lens rotates during autofocusing, do not touch the rotating part. Tips for avoiding smudges and dust When changing lenses, do it quickly in a place with minimal dust.
Attaching a Lens 1. Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. 2. Attach the lens. Align the red mount index on the lens with the red mount index on the camera and turn the lens as shown by the arrow until it clicks in place.
3. Set the lens's focus mode switch to < >. < > stands for autofocus. < > stands for manual focus. Autofocus will not operate. For RF lenses without a focus mode switch, set to [AF] or [MF] in the camera menu, in [ : Focus mode]. 4. Remove the front lens cap.
Detaching a Lens While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach lens caps to the lens you removed.
Attaching/Detaching EF/EF-S Lenses Attaching a Lens Detaching a Lens All EF and EF-S lenses can be used by attaching an optional Mount Adapter EF-EOS R. The camera cannot be used with EF-M lenses. Attaching a Lens 1. Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows.
2. Attach the lens to the adapter. Align the red or white mount index on the lens with the corresponding mount index on the adapter and turn the lens as shown by the arrow until it clicks into place. (1) Red index (2) White index 3. Attach the adapter to the camera. Align the red mount indexes (3) on the adapter and camera and turn the lens as shown by the arrow until it clicks into place.
4. 5. Set the lens's focus mode switch to < >. < > stands for autofocus. < > stands for manual focus. Autofocus will not operate. Remove the front lens cap.
Detaching a Lens 1. While pressing the lens release button, turn the adapter as shown by the arrow. Turn the lens until it stops, then detach it. 2. Detach the lens from the adapter. Hold down the lens release lever on the adapter and turn the lens counterclockwise. Turn the lens until it stops, then detach it. Attach lens caps to the lens you removed. Caution For lens precautions, see Attaching/Detaching RF Lenses.
Multi-Function Shoe Using the Multi-Function Shoe The multi-function shoe is a hot shoe that supplies power to accessories and offers advanced communication functionality. Using the Multi-Function Shoe Removing the shoe cover Remove the shoe cover (1) by pressing the part labeled (A) in the figure as shown with your finger. After removal, keep the shoe cover in a convenient place to avoid losing it.
Attaching the shoe cover After removing accessories from the multi-function shoe, reattach the shoe cover to protect the contacts from dust and water. Slide the shoe cover all the way in by pressing the part labeled (B) in the figure, as shown. Caution Attach accessories correctly as described in Attaching accessories. Loose attachment may cause the camera or accessories to malfunction, and accessories may fall off.
Using the Viewfinder Adjusting the Viewfinder Using Eyecup ER-hE (Sold Separately) Look through the viewfinder to activate it. You can also restrict display to either the screen or viewfinder ( ). Adjusting the Viewfinder 1. Turn the dioptric adjustment knob. Turn the knob left or right to make the viewfinder display look sharp. Caution The viewfinder and screen cannot be activated at the same time.
Using Eyecup ER-hE (Sold Separately) Using Eyecup ER-hE may help improve eye control accuracy under intense light sources and enhance viewfinder visibility outdoors. 1. Detach the eyecup. Press in the position indicated.
2. Attach Eyecup ER-hE. Hold the eyecup as shown. Slide along the viewfinder eyepiece grooves to attach, and press all the way in. You can rotate Eyecup ER-hE as necessary for adjustment. It clicks every 90° and can be rotated 360°.
3. To remove Eyecup ER-hE: Hold the eyecup as shown in step 2 and lift straight up.
Using Eye Control Performing Calibration Using Eye Control for AF Configuring Pointer Display Managing Calibration Data You can control focusing by looking at AF points to select them in viewfinder shooting (eye control). The process of registering characteristics of your line of sight for accurate detection of eye movement by the camera in viewfinder shooting is called calibration. Calibration enables higher eye control accuracy. Caution Eye control is only available in still photo shooting.
2. Select [Calibration (CAL)]. Calibration results (calibration data) are saved to the current [CAL no.] number. 3. Select [Start]. 4. Look through the viewfinder. Holding the camera horizontally, look through the viewfinder so that the four corners of the screen appear evenly spaced. Press the < > button.
5. Start calibration. Look at the indicator displayed and press the < > button. Keep looking at the indicator without blinking until it disappears. This process is repeated for indicators at five positions (center, right, left, top, and bottom). 6. Perform calibration for vertical shooting. For higher eye control accuracy, select [Refine] and perform calibration for vertical shooting.
7. Exit calibration. Select [Exit]. Calibration results (calibration data) are saved to the calibration number shown in step 2. After calibration, look through the viewfinder and make sure the pointer moves in response. If the pointer does not seem to follow your gaze closely, perform calibration again. Note Also read General eye control precautions and Enhancing eye control accuracy.
Adding calibration data To register calibration data for other users or eyewear conditions, select an available number to assign the data to from the numbers labeled with [ ] on the [CAL no.] screen, then perform calibration.
Using Eye Control for AF Caution Always use eye control under the same eyewear conditions as when you performed calibration (such as with or without glasses or contact lenses). Note Also read General eye control precautions and Enhancing eye control accuracy. Menu settings 1. Select [ : Eye control 2. Select [Eye control ]. ].
3. Select [On]. You can enable switching between [Eye control] [Enable] and [Disable] from the Quick Control screen by customizing the Quick Control screen ( ). 4. Select [CAL no.]. Select a calibration number matching your eyewear conditions (such as with or without glasses). 5. Select calibration data to use. Press < >.
Operations in viewfinder shooting 1. Look at the subject. A pointer (1) is displayed when you look through the viewfinder. With [ : Subject tracking] set to [On], a tracking frame [ also displayed when subjects are detected. ] (2) is Look at the position where you wish to focus. To focus at the position of the tracking frame, look at the tracking frame. The pointer may stop moving unless the camera can follow your eye movement.
2. Confirm the subject to start focusing. Pressing the shutter button halfway confirms the subject to focus on. With [ : AF area] set to [Whole area AF], the camera focuses in the area near the pointer. With the AF area set to an option other than [Whole area AF], the camera focuses after moving the AF area to the pointer position. With [ : AF operation] set to [ ], the active AF point turns blue (3).
Using eye control to display the focus guide By setting [ : Focus guide] to [On], you can use eye control to display the focus guide for assistance when focusing manually. 1. Look at the subject. Look at the subject to focus on. 2. Press the shutter button halfway. The focus guide (1) is displayed where you are looking. For details on using the focus guide to focus, see Focus Guide. Note With [ : Subject tracking] set to [On], a tracking frame [ when subjects are detected.
General eye control precautions When multiple people will use eye control on the same camera, each person should select a different calibration number and perform calibration. Similarly, when the same person will use eye control with and without glasses or contact lenses, a different calibration number should be selected and calibration performed for each situation. When using Eyecup ER-h or an optional Eyecup ER-hE, select a different calibration number and perform calibration.
Enhancing eye control accuracy The camera can learn about eye characteristics from the calibration data it collects. Eye control accuracy can be improved by repeating calibration under various levels of brightness (such as indoors, outdoors, during the day, and at night) for the same calibration number. To use eye control in each camera orientation, repeat calibration for the same calibration number with the camera held horizontally and vertically with the grip up and down.
Configuring Pointer Display You can configure pointer display, including whether the pointer is visible or not. Pointer display Pointer visibility can be set to [On], [Shtg standby], or [Off]. • Select [Shtg standby] to keep the pointer visible from when you look through the viewfinder until the moment you confirm the subject to focus on using eye control. • The pointer may not always be displayed, depending on the state of the camera.
Display format Choose [ ] or [ ] as the style of pointer displayed.
Managing Calibration Data Entering names You can enter names to identify calibration data. 1. Select a calibration data number. Select the number and press the < 2. > button. Enter text. Use the < > or < > dial or < press < > to enter it. By selecting [ > to select a character, then ], you can change the input mode. To delete single characters, select [ ] or press the < When you are finished entering text, press the < select [OK]. 93 > button.
Saving and loading calibration data Registered calibration data can be saved to a card. You can also load calibration data from a card to use it. 1. Select [Calibration (CAL)]. 2. Select [Save/load (card)]. 3. Select [Save to card]. Select [Save to card] to save all calibration data on the camera to the card. Select [Load from card] to overwrite calibration data on the camera with calibration data from the card.
Deleting calibration data Eye control is less accurate if the same calibration number is used for calibration under different eyewear conditions (such as with or without glasses or contact lenses) or by multiple users. In this case, delete the calibration data and perform calibration again. 1. Select [Calibration (CAL)]. 2. Select [Delete]. 3. Delete the calibration data. Select the data to delete and press < >. To delete all calibration data, select [Delete all] and press < >.
Basic Operations Holding the Camera Shutter Button < < < < < < > Main Dial > Quick Control Dial 1 > Quick Control Dial 2 > Multi-Controller > Mode Button > Multi-Function Button < > AF Start Button/Smart Controller < > Multi-Function Lock Switch < > LCD Panel Info Switching/Illumination Button Vertical Shooting < > Control Ring Button Backlighting < > Info Button 96
Holding the Camera Viewing the screen as you shoot As you shoot, you can tilt the screen to adjust it. For details, see Using the Screen. (1) Normal angle (2) Low angle (3) High angle Shooting through the viewfinder To obtain sharp images, hold the camera still to minimize camera shake. (1) Horizontal shooting (2) Vertical shooting 1.With your right hand, hold the camera firmly by the camera grip. 2.With your left hand, support the lens from below. 3.
Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture value. The exposure value (shutter speed and aperture value) is displayed on the screen, in the viewfinder, or on the LCD panel for 8 sec. (metering timer/ ). Pressing completely This releases the shutter and takes the picture.
Note The camera will still pause before taking a picture if you press the shutter button completely without pressing it halfway first, or if you press the shutter button halfway and immediately press it completely. Even during menu display or image playback, you can return to shooting standby by pressing the shutter button halfway.
< > Main Dial (1) After pressing a button, turn the < > dial. Press a button such as < >, < >, < >, or < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as setting the ISO speed, drive mode, AF operation, white balance, and flash exposure compensation. (2) Turn only the < > dial. Turn the < > dial while looking at the screen, viewfinder, or LCD panel. Use this dial to set the shutter speed, aperture value, etc.
< > Quick Control Dial 1 (1) After pressing a button, turn the < > dial. Press a button such as < >, < >, < >, or < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as selecting the ISO speed, drive mode, AF operation, white balance, and flash exposure compensation. (2) Turn only the < > dial. Turn the < > dial while looking at the screen, viewfinder, or LCD panel.
< > Quick Control Dial 2 (1) After pressing a button, turn the < > dial. Press a button such as < >, then turn the < > dial. If you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as switching between main tabs on the menu screen. (2) Turn only the < > dial. Turn the < > dial while looking at the screen, viewfinder, or LCD panel. Used for operations such as setting the ISO speed.
< > Multi-Controller < > is an eight-direction key with center button. To use it, press lightly with the tip of your thumb.
< > Mode Button You can set the shooting mode. Press the < shooting mode.
< > Multi-Function Button By pressing the < > button and turning the < > dial, you can set the ISO speed ( ), drive mode ( ), AF operation ( ), white balance ( ), and flash exposure compensation ( ). To select the AF area, press the < > button ( ), then press the < > button.
< > AF Start Button/Smart Controller On this control, you can press the center or drag with your finger. Pressing the < > button activates autofocusing. This is equivalent to pressing the shutter button halfway. You can move the AF point by dragging on the smart controller after pressing the > button. You can also adjust the sensitivity—the amount the AF point moves in < response to dragging ( ).
< > Multi-Function Lock Switch Configuring [ : Multi function lock] ( ) and setting the power/multi-function lock switch to < > prevents settings from being changed by accidentally touching the Main dial, Quick Control dials, Multi-controller, control ring, or touch-screen panel.
< > LCD Panel Info Switching/Illumination Button Each press of the < > button changes the information on the LCD panel. Illuminate the LCD panel by holding down the < 108 > button ( ).
Vertical Shooting Vertical shooting controls such as buttons, dials, and a Multi-controller are arranged near the bottom of the camera ( ).
< > Control Ring By default, exposure compensation can be set by turning the control ring of RF lenses or mount adapters while pressing the shutter button halfway in [ ], [ ], [ ], [ ], or [ ] mode. Otherwise, you can assign a different function to the control ring by customizing operations in [ : Customize dials] ( ).
Button Backlighting < >, < >, < >, < >, and < / > button backlighting is activated during LCD panel illumination, menu or Quick Control screen display, or image playback. This makes it easier to see the button layout in low-light locations. Button backlighting is deactivated when the metering timer starts, which is triggered by pressing the shutter button halfway, for example.
< > Info Button Each press of the < > button changes the information shown. The following sample screens are for still photos.
Menu Operations and Settings Menu Screen Menu Setting Procedure Dimmed Menu Items (1) < (2) < > button > button > button (3) < (4) Screen (5) < > Quick control dial 1 (6) < > button (7) < > Quick control dial 2 (8) < > Main dial 113
Menu Screen (1) Main tabs (2) Secondary tabs (3) Menu items (4) : Shooting (5) : Autofocus (6) : Playback (7) (8) : Communication functions : Set-up (9) : Custom Functions (10) : My Menu (11) Menu settings 114
Menu Setting Procedure 1. Display the menu screen. Press the < 2. > button to display the menu screen. Select a tab. Each time you turn the < > dial, the main tab (group of functions) will switch. You can also switch tabs by pressing the < > button. Turn the < 3. > dial to select a secondary tab. Select an item. Turn the < > dial to select an item, then press < 115 >.
4. Select an option. Turn the < > dial to select an option. The current setting is indicated in blue. 5. Set an option. Press < 6. > to set it. Exit the setting. Press the < > button to return to shooting standby. Note The description of menu functions hereafter assumes that you have pressed the < > button to display the menu screen. Menu operations are also possible by tapping the menu screen or using < >. To cancel the operation, press the < > button.
Dimmed Menu Items Example: When focus bracketing has been set Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing < >. If you cancel the overriding function's setting, the dimmed menu item will become settable. Caution You may not be able to see the overriding function for certain dimmed menu items.
Quick Control You can directly and intuitively select and set the settings displayed. 1. Press the < > button ( ).
2. Select a setting item and set your preferred option. To select an item, turn the < > dial or press < > up or down. To adjust the setting, turn the < > or < > dial, or press < left or right. Some items are set by pressing a button after this. > You can customize the setting items on the screen shown above in [ : Customize Quick Controls] ( ). To access the Customize Quick Controls screen, press and hold the < > button ( ).
Touch-Screen Operation Tapping Dragging Tapping Sample screen (Quick Control) Use your finger to tap (touch briefly and then remove your finger from) the screen. For example, when you tap [ ], the Quick Control screen appears. By tapping [ you can return to the preceding screen. Note To have the camera beep for touch operations, set [ : Beep] to [Enable] ( ). Responsiveness to touch operations can be adjusted in [ : Touch control] ( ).
Dragging Sample screen (Menu screen) Slide your finger while touching the screen.
Shooting Mode This chapter describes shooting modes.
Fv: Flexible-Priority AE In this mode, you can set shutter speed, aperture value, and ISO speed manually or automatically and combine these settings with your choice of exposure compensation. Shooting in [ ] mode, with control over each of these parameters, is equivalent to shooting in [ ], [ ], [ ], or [ ] mode. *[ ] stands for Flexible value. 1. Set the shooting mode to [ Press the < 2. ]. > button, then turn the < > dial to select [ ]. Set the shutter speed, aperture value, and ISO speed.
3. Set the amount of exposure compensation. Turn the < > dial and select the exposure level indicator. [ [ ] appears to the left of the exposure level indicator. Turn the < > or < > dial to set the level. To reset the setting to [±0], press the < Combinations of functions in [ Shutter Speed Aperture Value [AUTO] [AUTO] Manual selection [AUTO] [AUTO] Manual selection Manual selection Manual selection ] or > button.
Note Values for shutter speed, aperture value, and ISO speed that are set to [AUTO] are underlined. You can set shutter speed, aperture value, and ISO speed to [AUTO] and exposure compensation amount to [±0] in step 2 or 3 by holding down the < > button.
P: Program AE The camera automatically sets the shutter speed and aperture value to suit the subject's brightness. * [ ] stands for Program. * AE stands for Auto Exposure. 1. Set the shooting mode to [ ]. Press the < 2. > button, then turn the < > dial to select [ ]. Focus on the subject. Aim the AF point over the subject and press the shutter button halfway. Once the subject is in focus, the AF point turns blue (or with One-Shot AF, green).
4. Take the picture. Compose the shot and press the shutter button completely. Caution If the “30"” shutter speed and the lowest aperture value blink, it indicates underexposure. Increase the ISO speed or use flash. If the “1/8000” shutter speed and the highest aperture value blink, it indicates overexposure. Lower the ISO speed or use an ND filter (sold separately) to reduce the amount of light entering the lens.
Tv: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture value to obtain the standard exposure matching the brightness of the subject. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion. *[ ] stands for Time value. Blurred motion (Slow speed: 1/30 sec.) Frozen motion (Fast speed: 1/2000 sec.) 1. Set the shooting mode to [ Press the < [ ]. ].
2. Set the desired shutter speed. Turn the < 3. > dial to set it. Focus on the subject. Press the shutter button halfway. The aperture value is set automatically. 4. Check the display and shoot. As long as the aperture value is not blinking, the standard exposure will be obtained. Caution If the lowest aperture value blinks, it indicates underexposure. Turn the < > dial to set a slower shutter speed until the aperture value stops blinking or set a higher ISO speed.
Note Shutter speed display For example, “0"5” indicates 0.5 sec. and “15"”, 15 sec. Shutter speeds from “64000” to “4” on the LCD panel indicate the denominator of the fractional shutter speed.
Av: Aperture-Priority AE Depth-of-Field Preview In this mode, you set the desired aperture value and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. A higher f/ number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus. On the other hand, a lower f/number (larger aperture hole) will make less of the foreground and background fall within acceptable focus.
2. Set the desired aperture value. Turn the < 3. > dial to set it. Focus on the subject. Press the shutter button halfway. The shutter speed is set automatically. 4. Check the display and shoot. As long as the shutter speed is not blinking, the standard exposure will be obtained. Caution If the “30"” shutter speed blinks, it indicates underexposure. Turn the < > dial to decrease the aperture value (open the aperture) until the shutter speed blinking stops or set a higher ISO speed.
Note Aperture value display The higher the value, the smaller the aperture opening will be. The aperture value displayed varies depending on the lens. If no lens is attached to the camera, “F00” will be displayed for the aperture. Depth-of-Field Preview Press the depth-of-field preview button to stop down the lens to the current aperture value setting and check the area in focus (depth of field). Note The larger the aperture value, the wider the area in focus, from the foreground to the background.
M: Manual Exposure Exposure Compensation with ISO Auto In this mode, you set both the shutter speed and aperture value as desired. To determine the exposure, refer to the exposure level indicator or use a commercially available exposure meter. *[ ] stands for Manual. 1. Set the shooting mode to [ Press the < 2. > button, then turn the < Set the ISO speed ( Turn the < ]. > dial to select [ ). > dial to set it. With ISO Auto, you can set exposure compensation ( 3. ]. ).
4. Focus on the subject. Press the shutter button halfway. Check the exposure level mark [ ] to see how far the current exposure level is from the standard exposure level. (1) Standard exposure index (2) Exposure level mark 5. Set the exposure and take the picture. Check the exposure level indicator and set the desired shutter speed and aperture value.
Note In [ ] mode with ISO Auto, [ ] (evaluative metering), and [ : AE lock meter. mode after focus] set to the default setting ( ), holding down the shutter button halfway locks the ISO speed after the camera focuses with One-Shot AF. When ISO Auto is set, you can press the < > button to lock the ISO speed. If you press the < > button and recompose the shot, you can see the exposure level difference on the exposure level indicator compared to when the < > button was pressed.
BULB: Long (Bulb) Exposures Bulb Timer In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. Use bulb exposures for night scenes, fireworks, astrophotography, and other subjects requiring long exposures. 1. Set the shooting mode to [ Press the < [ ]. 2. ]. > button, then turn the < Set the desired aperture value. Turn the < > dial to set it.
3. Take the picture. The exposure will continue for as long as you keep the shutter button pressed completely. Elapsed exposure time is displayed on the LCD panel. Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. Long bulb exposures produce more noise in the image than usual. ISO 400 is used when the camera is set to ISO Auto.
1. Select [ 2. Select [Enable]. : Bulb timer]. Select [Enable], then press the < 3. > button. Set the exposure time. Select an option (hours : minutes : seconds). Press < > to display [ ]. Set a value, then press < 139 >. (Returns to [ ].
4. Select [OK]. 5. Take the picture. After you press the shutter button completely, the bulb exposure continues for your specified time. [ ] and the exposure time are displayed on the LCD panel during bulb timer shooting. To clear the timer setting, select [Disable] in step 2. Caution Bulb exposure stops if you press the shutter button completely and release it during the timer.
Shooting and Recording This chapter describes shooting and recording and introduces menu settings on the shooting [ ] tab.
Still Photo Shooting To prepare for still photo shooting, set the still photo shooting/movie recording switch to < >, then press the < > button and choose a shooting mode.
• Focus Bracketing • Interval Timer Shooting • Silent Shutter Function • Shutter Mode • Releasing Shutter without Card • Image Stabilizer (IS Mode) • Customizing Quick Controls • Shooting with the Touch Shutter • Image Review • High-Speed Display • Metering Timer • Display Simulation • Optical Viewfinder Simulation • Shooting Information Display • Viewfinder Display Format • Display Performance • Metering Mode Selection • Manual Exposure Compensation • Exposure Lock (AE Lock) • General Still Photo Shooting
Tab Menus: Still Photo Shooting Shooting 1 (1) quality (2) Img type/size (3) Cropping/aspect ratio Shooting 2 (1) Expo.comp.
Shooting 3 (1) Anti-flicker shoot. (2) HF anti-flicker shooting (3) External Speedlite control (4) Metering mode Shooting 4 (1) White balance (2) Set Custom WB (3) WB Shift/Bkt.
Shooting 5 (1) Long exp.
Shooting 7 (1) Drive mode (2) Interval timer (3) Bulb timer (4) Silent shutter function (5) Shutter mode (6) Release shutter without card Shooting 8 (1) IS (Image Stabilizer) mode (2) Customize Quick Controls (3) Touch Shutter (4) Image review (5) High speed display (6) Metering timer Caution [ : IS (Image Stabilizer) mode] is not displayed when an IS-equipped lens is attached.
Shooting 9 (1) Display simulation (2) OVF sim. view assist (3) Shooting info. disp. (4) VF display format (5) Disp.
Image Quality Image Size Selection RAW Images Guide to Image Quality Settings Maximum Burst for Continuous Shooting JPEG/HEIF Quality Note “Image quality” in this guide refers to both image size and JPEG/HEIF quality ( ). Image Size Selection You can specify images. , , , or for JPEG/HEIF images and or for RAW Note HEIF can be specified when [ : HDR shooting ] is set to [Enable]. You can convert these images to JPEG images after shooting ( ). 1. Select [ : Img type/size].
2. Set the image size. Standard/Auto switch card/Record to multiple For RAW images, turn the < JPEG/HEIF images, turn the < Press < > dial to select the size, and for > dial. > to set it. Record separately When [ Rec options] in [ : Record func+card/folder sel.] is set to [Rec. separately], turn the < > dial to select [ ] or [ ], then press < >. Note that recording separately to and is not available for RAW images. Select an image size on the screen displayed, then press < 150 >.
Note is set if you set both RAW and JPEG/HEIF to [ ]. Two versions of each shot are recorded at your specified image quality when you have selected both RAW and JPEG/HEIF. Both images have the same file number but each has a different file extension, with .JPG for JPEG, .HIF for HEIF and .CR3 for RAW. Meanings of image size icons are as follows: : RAW, : Compact RAW, JPEG: JPEG, HEIF: HEIF, : Large, : Medium, : Small 1, : Small 2.
RAW Images RAW images are raw data from the image sensor that are recorded to the card digitally as or , based on your selection. produces RAW images with smaller file sizes than . RAW images can be processed using [ : RAW image processing] ( ) to save them as JPEG or HEIF images. As the RAW image itself does not change, you can process the RAW image to create any number of JPEG or HEIF images with various processing conditions. You can use Digital Photo Professional (EOS software) to process RAW images.
Guide to Image Quality Settings See Still photo file size / Number of possible shots / Maximum burst for continuous shooting for details on file size, number of shots available, maximum burst, and other estimated values.
Maximum Burst for Continuous Shooting The approximate maximum burst is displayed at the upper left of the shooting screen and lower right of the viewfinder. Note If the maximum burst is displayed as “99”, it indicates that you can shoot 99 or more shots continuously. Fewer shots are available for a value of 98 or lower, and when [BUSY] is displayed on the screen, internal memory is full and shooting will stop temporarily. If you stop continuous shooting, the maximum burst will increase.
JPEG/HEIF Quality 1. Select [ 2. Select the desired image size. : quality]. Select the image size, then press < 3. >. Set the desired quality (compression). Select the number, then press < >. Higher numbers offer higher quality (lower compression). Quality of 6–10 is indicated by < 155 >, and 1–5, by < >.
Note The higher the quality, the fewer shots will be available. In contrast, the lower the quality, the more shots will be available.
Still Photo Cropping/Aspect Ratio Normally with RF or EF lenses, images are captured at the sensor size of approx. 36.0×24.0mm in full-frame shooting, but in cropped shooting, you can isolate and magnify the center of the image approx. 1.6× (APS-C size) as if using a telephoto lens, or you can set an aspect ratio as needed before shooting. EF-S lenses capture a 3:2 area in the center, magnified approx. 1.6× (APS-C size). 1. Select [ 2. Select an option. : Cropping/aspect ratio].
3. Select how the shooting area is displayed. On the screen in step 2, press the < > button. Select the type of display, then press < >. Caution / / / image quality options are not available when [1.6x (crop)] is set, or with EF-S lenses. Shooting with [1.6x (crop)] and image quality set to / / produces / / images, respectively. / Shooting with an EF-S lens when [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)] is set automatically clears the setting and shoots with [1.
4. Take the picture.
When [1.6x (crop)] is set or an EF-S lens is used, an image magnified approx. 1.6× is displayed. When [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)] is set, the image within the black masked or outlined area is captured. Caution Areas outside the cropped area are not recorded in RAW shooting when [1.6x (crop)] is set, or with EF-S lenses. [Shooting area] has no effect on display when [1.6x (crop)] is set, or with EF-S lenses.
Auto Exposure Bracketing (AEB) In exposure bracketing, three consecutive images are captured at different exposures within your specified range of up to ±3 stops (in 1/3-stop increments) by automatically adjusting the shutter speed, aperture value, or ISO speed. * AEB stands for Auto Exposure Bracketing. Setting with camera controls 1. Press the < 2. Set the AEB range. Turn the < > and < >, < >, or < > button at the same time. > dial to set the AEB range.
3. Take the picture. Standard exposure Decreased exposure Increased exposure Three bracketed shots are taken, according to the specified drive mode, in this sequence: Standard exposure, decreased exposure, and increased exposure. AEB will not be automatically canceled. To cancel AEB, follow step 2 to set the AEB range to “0.” Setting from the menu 1. Select [ : Expo.comp./AEB].
2. Set the AEB range. Turn the < > dial to set the AEB range (1). By turning the < dial, you can set the exposure compensation amount. Press < > > to set it. When you close the menu, the AEB range will be displayed on the screen. 3. Take the picture. Shoot as described in step 3 of Setting with camera controls. AEB will not be automatically canceled. To cancel AEB, follow step 2 to turn off the AEB range display.
Note [ ] blinks in the lower left of the screen during AEB. If the drive mode is set to [ ], press the shutter button three times for each shot. In [ ], [ ], or [ ] mode, holding down the shutter button completely captures three images, one after another, before the camera automatically stops shooting. When [ ] or [ ] is set, three consecutive shots are captured after a delay of 10 or 2 sec. You can set AEB in combination with exposure compensation.
ISO Speed Settings for Still Photos ISO Speed Range When Set Manually ISO Speed Range Used with ISO Auto Minimum Shutter Speed for ISO Auto Set the ISO speed (image sensor's sensitivity to light) to suit the ambient light level. For details on ISO speed in movie recording, see ISO Speed in Movie Recording. 1. Set the ISO speed. With an image displayed on the screen, set by turning the < > dial. ISO speed can be set within ISO 100–102400 in 1/3-stop increments.
Note ISO speed can also be set in the ISO speed item by pressing the < > button with an image displayed on the screen. Can also be set on the [ISO speed] screen in [ : ISO speed settings]. To expand the manual ISO speed setting range from L (equivalent to ISO 50) to H (equivalent to ISO 204800), adjust [ISO speed range] in [ : ISO speed settings] ( ).
ISO Speed Range When Set Manually You can set the manual ISO speed setting range (minimum and maximum limits). You can set the minimum limit within L (equivalent to ISO 50) to ISO 102400, and the maximum limit within ISO 100 to H (equivalent to ISO 204800). 1. Select [ 2. Select [ISO speed range]. 3. Set [Minimum]. : ISO speed settings]. Select the [Minimum] box, then press < Select the ISO speed, then press < 167 >. >.
4. Set [Maximum]. Select the [Maximum] box, then press < Select the ISO speed, then press < 5. Select [OK]. 168 >. >.
ISO Speed Range Used with ISO Auto You can set the automatic ISO speed range for ISO Auto within ISO 100–51200. The minimum can be set within ISO 100–51200 and the maximum within ISO 200–51200, in 1stop increments. 1. Select [Auto range]. 2. Set [Minimum]. Select the [Minimum] box, then press < Select the ISO speed, then press < 169 >. >.
3. Set [Maximum]. Select the [Maximum] box, then press < Select the ISO speed, then press < 4. >. >. Select [OK]. Note The [Minimum] and [Maximum] settings will also function as the minimum and maximum speeds for ISO speed safety shift ( ).
Minimum Shutter Speed for ISO Auto To prevent shutter speeds from being set too low automatically, you can set the minimum shutter speed for ISO Auto. This is effective in [ ] or [ ] mode when shooting subjects in motion with a wide-angle lens, or when using a telephoto lens. It can also reduce camera shake and blurred subjects. 1. Select [Min. shutter spd.].
2. Set the desired minimum shutter speed. Auto If you select [Auto], turn the < > dial to set the difference relative to standard speed (toward Slower or Faster), then press < >. Manual If you select [Manual], turn the < then press < >. > dial to select the shutter speed, Caution If a correct exposure cannot be obtained with the maximum ISO speed limit set with [Auto range], a shutter speed slower than the [Min. shutter spd.] will be set to obtain the standard exposure.
HDR PQ Settings PQ in HDR PQ refers to the gamma curve of the input signal for displaying HDR images. HDR PQ settings enable the camera to produce HDR images conforming to the PQ specification defined in ITU-R BT.2100 and SMPTE ST.2084. (Actual display depends on monitor performance.) Shots are captured as HEIF or RAW images. * HDR stands for High Dynamic Range. * PQ stands for Perceptual Quantization. 1. Select [ 2. Select [Enable]. : HDR shooting ].
Caution Expanded ISO speeds (L, H) are not available in HDR shooting. Some scenes may look different from how they appear on an HDR display device. Unused signal values are roughly indicated by image areas in gray in the histogram when [ : HDR shooting ] is set to [Enable]. [ : Disp. performance] is not available when [ : HDR shooting ] is set to [Enable]. It is set to [Smooth].
HDR Mode You can shoot still photos with clipped highlights and shadows reduced for a high dynamic range of tones even in high-contrast scenes. HDR shooting is effective for landscape and still-life shots. HDR shooting enhances gradation in dark image areas by merging three images deliberately captured at different exposures (standard, underexposed, and overexposed) to produce an HDR image that compensates for loss of detail in dark image areas. HDR images are captured as HEIFs or JPEGs.
3. Set [Limit max brightness] (only with [ to [Enable]). : HDR shooting ] set With [Disable], maximum brightness is not limited. Recommended when you will review images on a monitor supporting display at brightnesses exceeding 1000 nits. With [1000 nits], maximum brightness is limited to approx. 1000 nits. 4. Set [Continuous HDR]. With [1 shot only], HDR shooting is canceled automatically after you finish shooting.
5. Set [Auto Image Align]. For handheld shooting, select [Enable]. When using a tripod, select [Disable]. 6. Set [HDR ghost correc.]. Shooting moving subjects may leave afterimages of the subject. With [Enable], images are processed to correct ghosting. HDR images can be produced faster with [Disable] than with [Enable]. 7. Specify the images to save. To save the three images captured and the resulting HDR image, select [All images].
8. Take the picture. When you press the shutter button completely, three consecutive images will be captured, and the HDR image will be recorded to the card. Caution Expanded ISO speeds (L, H) are not available in HDR shooting. The flash will not fire during HDR shooting. AEB is not available. In HDR shooting, three images are captured with settings such as shutter speed automatically adjusted.
Note The electronic shutter is used in HDR shooting. Image quality of RAW HDR images is as follows. • [ : HDR shooting ] set to [Disable]: JPEG quality ] set to [Enable]: HEIF quality • [ : HDR shooting HDR image quality in RAW+JPEG or RAW+HEIF shooting corresponds to your specified JPEG or HEIF image quality.
Auto Lighting Optimizer Brightness and contrast can be corrected automatically if shots look dark or contrast is too low or high. 1. Select [ 2. Set a correction option. : Auto Lighting Optimizer]. Caution Noise may increase and apparent resolution may change, under some shooting conditions. If the effect of Auto Lighting Optimizer is too strong and results are not at your preferred brightness, set to [Low] or [Disable].
Note To enable [ : Auto Lighting Optimizer] to be set even in [ ] and [ ] modes, press the < > button in step 2 to clear the checkmark [ ] for [Disabled in M or B modes].
Highlight Tone Priority You can reduce overexposed, clipped highlights. 1. Select [ 2. Set an option. : Highlight tone priority]. [Enable]: Improves gradation in highlights. The gradation between the grays and highlights becomes smoother. [Enhanced]: Reduces overexposed highlights even more than [Enable], under some shooting conditions. Caution Noise may increase slightly. The available ISO range starts at ISO 200. Expanded ISO speeds cannot be set.
Note [ : Highlight tone priority] is set to [Enable] and cannot be changed when you set [ : HDR shooting ] to [Enable] after pressing the < > button to add a checkmark to this setting. [ : Highlight tone priority] will be set to [Disable] even if you set [ : HDR shooting ] to [Enable], with [Adjust dyn range] in [ : HDR Mode] set to an option other than [Disable HDR].
Anti-Flicker Shooting Uneven exposure and color may appear in continuous shooting at fast shutter speeds under flickering light sources such as fluorescent lights, due to uneven vertical exposure. Antiflicker shooting enables you to take pictures when exposure and colors are less affected by flickering. 1. Select [ 2. Select [Enable]. 3. Take the picture. : Anti-flicker shoot.].
Caution When [Enable] is set and you shoot under a flickering light source, the shutterrelease time lag may become longer. Also, the continuous shooting speed may become slower, and the shooting interval may become irregular. Flicker at a frequency other than 50Hz or 60Hz cannot be detected. Also, if the flickering frequency of the light source changes during continuous shooting, effects of the flicker cannot be reduced.
High-Frequency Anti-Flicker Shooting Images may be affected by banding if you shoot under light sources that flicker at high frequencies. High-frequency anti-flicker shooting enables you to take pictures at suitable shutter speeds for high-frequency flickering, which minimizes the effect of this flickering on images. Caution Exposure in still photo shooting may vary. HDR mode is not available in HF anti-flicker shooting. Before HF anti-flicker shooting, consider setting [ : Same expo.
3. Select [HF anti-flicker shooting]. 4. Select [On].
5. Select an option.
Auto detecting The camera detects 50.0–2011.2 Hz light sources and displays a suitable shutter speed for shooting under light sources that flicker at high frequencies. You can then switch to the indicated shutter speed. 1. Set the desired shutter speed. Set the shutter speed you would prefer to shoot at. For light sources that flicker at high frequencies, the camera will determine a suitable shutter speed near this value. 2. Select [Auto detecting]. 3. Select [OK].
4. Switch to the indicated shutter speed. Select [Yes] to switch to the recommended shutter speed. Selecting [Yes (move to Tv settings)] will display the [Manual setting] screen. Go to step 2 in Manual setting. 5. Take the picture. Caution The range of the recommended shutter speed indicated varies by shutter mode. • Mechanical shutter: 1/50.0 to 1/1024.0 sec. • Electronic first-curtain: 1/50.0 to 1/512.0 sec. • Electronic shutter: 1/50.0 to 1/2048.0 sec. • Movie recording: 1/50.0 to 1/2048.0 sec.
Note Movie display is not updated if high-frequency flickering is automatically detected during HDMI output of 4K movies. Manual setting Check on the screen for image areas affected by light sources that flicker at high frequencies, then find a suitable shutter speed. 1. Select [Manual setting]. 2. Adjust the shutter speed. Do the following if banding is not eliminated at the shutter speed set with automatic detection. • Turn the < > dial.
3. Take the picture. Caution The shutter speed range available for the manual setting mode varies by shutter mode. • Mechanical shutter: 1/50.0 to 1/2048.0 sec. • Electronic first-curtain: 1/50.0 to 1/2048.0 sec. • Electronic shutter: 1/50.0 to 1/8192.0 sec. • Movie recording: 1/50.0 to 1/4096.0 sec. Maximum flash sync speed in flash photography is limited to 1/159.8 sec. regardless of shutter mode. Dark lenses may prevent correct display simulation.
Shooting with Speedlites EL/EX Series Speedlites for EOS Cameras Canon Speedlites Other Than the EL/EX Series Non-Canon Flash Units EL/EX Series Speedlites for EOS Cameras Features of EL/EX series Speedlites (sold separately) can be used in flash photography with the camera. For instructions, refer to the EL/EX series Speedlite's Instruction Manual. Sync speed Varies depending on the shutter mode. [ : Shutter mode] Setting Sync Speed Mechanical 1/200 sec. or slower Elec. 1st-curtain 1/250 sec.
Caution Some Speedlites cannot be attached directly to this camera. For details, see MultiFunction Shoe. Setting [ : Auto Lighting Optimizer] ( ) to an option other than [Disable] may still cause images to look bright even if you set lower flash exposure compensation for darker images. Using high-speed sync may cause banding in images. To reduce the banding, it may help to do the following.
Canon Speedlites Other Than the EL/EX Series With an EZ/E/EG/ML/TL series Speedlite set to A-TTL or TTL autoflash mode, the flash can be fired at full output only. Set the camera's shooting mode to [ ] or [ ] and adjust the aperture value before shooting. When using a Speedlite that has manual flash mode, shoot in the manual flash mode.
Non-Canon Flash Units Sync speed Sync speed for non-Canon compact flash units varies by shutter mode. [ : Shutter mode] Setting Sync Speed Mechanical 1/200 sec. or slower Elec. 1st-curtain 1/250 sec. or slower Electronic 1/180 sec. or slower With large studio flash units, the flash duration is longer than that of a compact flash unit and varies depending on the model. Before shooting, confirm that flash sync is performed correctly by taking some test shots at a sync speed of approx. 1/60 sec.
Flash Function Settings Flash Firing E-TTL Balance E-TTL II Flash Metering Continuous Flash Control Slow Synchro Flash Function Settings Flash Custom Function Settings Clearing Flash Function Settings/Clearing All Speedlite Custom Functions Functions of EL/EX Series Speedlites compatible with flash function settings can be set via a camera menu screen. Attach the Speedlite to the camera and turn on the Speedlite before setting the flash functions.
2. Select an option. Flash Firing To enable flash photography, set to [Enable]. To enable only the AF-assist beam of the Speedlite, set to [Disable].
E-TTL Balance You can set your preferred appearance (balance) for flash shots. This setting enables you to adjust the ratio of ambient light to Speedlite light output. Set the balance to [Ambience priority] to lower the proportion of flash output and uses ambient light to produce lifelike shots with a natural mood. Especially useful when shooting dark scenes (indoors, for example). After switching to [ ] or [ ] mode, consider setting [Slow synchro] in [ : External Speedlite control] to [1/180-30sec.
E-TTL II Flash Metering Set to [Eval (FacePrty)] for flash metering suitable for shots of people. Set to [Evaluative] for flash metering that emphasizes firing in continuous shooting. If [Average] is set, the flash exposure will be averaged for the entire metered scene. Note Depending on the scene, flash exposure compensation may be necessary. Caution Even when [Eval (FacePrty)] is set, some subjects and shooting conditions may prevent you from obtaining the expected result.
Continuous Flash Control Set to [E-TTL each shot] to perform flash metering for each shot. Set to [E-TTL 1st shot] to perform flash metering for only the first shot before continuous shooting. The flash output level for the first shot is applied to all subsequent shots. Useful when prioritizing continuous shooting speed without recomposing shots. Caution Any subject movement in continuous shooting may cause exposure problems. [E-TTL 1st shot] is set when [ : Shutter mode] is set to [Elec.
Slow Synchro You can set the flash-sync speed for flash photography in [ ] or [ ] mode. Note that the maximum flash synchronization speed varies depending on the [ : Shutter mode] setting. It is 1/180 sec. when set to [Electronic], 1/250 sec. for [Elec. 1st-curtain], and 1/200 sec. for [Mechanical]. 1/180-30sec. auto ( )*1*2 The shutter speed is set automatically in the following range to suit the brightness. Highspeed sync is also possible.
* 3: [1/250-1/60sec. auto] ( [Mechanical]. * 4: [1/250 sec. (fixed)] ( [Mechanical]. ) when set to [Elec. 1st-curtain] or [1/200-1/60sec. auto] ( ) when set to [Elec. 1st-curtain] or [1/200 sec. (fixed)] ( ) for ) for Caution High-speed sync is not available in [ ] or [ ] mode when set to [1/180 sec. (fixed)]*1*4. Shutter speed is set to 1/8000 when [ : Shutter mode] is [Electronic] and [High-speed synchronization] is selected with a shutter speed of 1/8000 sec. or faster.
Flash Function Settings The information displayed on the screen, position of display, and available options vary depending on the Speedlite model, its Custom Function settings, the flash mode, and other factors. For details on the Speedlite's functions, refer to the Speedlite's Instruction Manual.
Flash mode You can select the flash mode to suit your desired flash photography. [E-TTL II flash metering] is the standard mode of EL/EX series Speedlites for automatic flash photography. [Manual flash] is for setting the Speedlite's [Flash output level] yourself. [CSP] (Continuous shooting priority mode) is available when using a compatible Speedlite. This mode automatically reduces flash output by one stop and increases ISO speed by one stop.
Wireless functions You can use radio or optical wireless transmission to shoot with wireless multiple-flash lighting. For details on wireless flash, refer to the Instruction Manual of a Speedlite compatible with wireless flash photography. Firing ratio control (RATIO) With a macro flash, you can set the firing ratio control. For details on firing ratio control, refer to the Instruction Manual of the macro flash.
Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the shooting starts. Set to [Second-curtain synchronization] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Set to [High-speed synchronization] for flash photography at higher shutter speeds than the maximum flash sync shutter speed.
Note If flash exposure compensation is set with the Speedlite, you cannot set the flash exposure compensation with the camera. If it is set with both the camera and Speedlite, the Speedlite's setting overrides the camera's.
Flash exposure bracketing Speedlites equipped with flash exposure bracketing (FEB) can change the external flash output automatically as three shots are taken at once.
Flash Custom Function Settings For details on the Speedlite's Custom Functions, refer to the Instruction Manual of the Speedlite. 1. Select [Flash C.Fn settings]. 2. Set the desired functions. Select the number. Select an option. Caution EX series Speedlites always fire at full output when the [Flash metering mode] Custom Function is set to [1:TTL] (autoflash). The Speedlite's Personal Function (P.Fn) cannot be set or canceled from the camera's [ : External Speedlite control] screen.
Clearing Flash Function Settings/Clearing All Speedlite Custom Functions 1. Select [Clear settings]. 2. Select the settings to be cleared. Select [Clear flash settings] or [Clear all Speedlite C.Fn's]. Select [OK] on the confirmation screen to clear all flash settings or Custom Function settings.
White Balance White Balance [ ] Auto White Balance [ ] Setting a Color Temperature White balance (WB) is for making the white areas look white. Normally, the Auto [ ] (Ambience priority) or [ ] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object. 1. Press the < > button ( ). With an image displayed on the screen, press the < 2.
3. Select a white balance setting. Turn the < > dial to make a selection. Note For [ ] and [ ] setting instructions, see [ To set your preferred color temperature, select [ turn the < > dial. ] Auto White Balance. ] in [ : White balance], then (Approx.
White Balance The human eye adapts to changes in lighting so that white objects look white under all kinds of lighting. Digital cameras determine white from the color temperature of lighting and, based on this, apply image processing to make color tones look natural in your shots.
[ ] Auto White Balance With [ ] (Ambience priority), you can slightly increase the intensity of the image's warm color cast when shooting a tungsten-light scene. If you select [ ] (White priority), you can reduce the intensity of the image's warm color cast. 1. Select [ 2. Select [ With [ 3. : White balance]. ]. ] selected, press the < Select an option. 215 > button.
Caution Precautions when set to [ ] (White priority) The warm color cast of subjects may fade. When multiple light sources are included in the scene, the warm color cast of the picture may not be reduced. When using flash, the color tone will be the same as with [ ] (Ambience priority).
[ ] Setting a Color Temperature A value can be set representing the white balance color temperature. 1. Select [ 2. Set the color temperature. : White balance]. Select [ Turn the < ]. > dial to set a color temperature, then press < >. The color temperature can be set from approx. 2500K to 10000K in 100K increments. Note When setting the color temperature for an artificial light source, set the white balance correction (magenta or green bias) as necessary.
Custom White Balance Registering Custom White Balances Selecting and Shooting with Custom White Balances Naming Custom White Balances With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. Up to five custom white balances can be registered to the camera. You can also add a name (caption) to registered custom white balances.
2. Select a custom white balance number to be registered. Press < >. Turn the < > dial to select a number from 1 to 5 for [ *], then press < >. The custom white balance will be registered to the selected number. 3. Select [Record and register WB].
4. Shoot a plain white object. The selected number blinks in the upper left of the screen and on the LCD panel. Aim the outlined area over a plain white object, so that white fills the area. Focus manually and shoot with the standard exposure set for the white object. You can use any of the white balance settings. The custom white balance is registered to the camera. To shoot with the registered custom white balance, see Selecting and Shooting with Custom White Balances.
Registration from the Quick Control screen 1. Press the < > button. Select the white balance setting item. 2. 3. Select [Custom]. Select a custom white balance number to register the white balance data to. Turn the < > dial to select a number from 1 to 5, then press the < > button.
4. Shoot a plain white object ( ). The custom white balance is registered to the camera. To shoot with the registered custom white balance, see Selecting and Shooting with Custom White Balances. Note If [Correct WB may not be obtained with the selected image] is displayed in step 4, return to step 1 and shoot again. Your shot in step 4 is not recorded to a card.
3. Select a custom white balance number to be registered. Press < >. Turn the < > dial to select a number from 1 to 5 for [ *], then press < >. The custom white balance will be registered to the selected number. 4. Select [Select image on card]. Images recorded on the card are displayed. 5. Select an image to register as the custom white balance. Turn the < < >.
6. Select [OK]. The custom white balance will be registered to the camera. Check the message and select [OK] to return to the screen in step 3. Caution If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained. The following images cannot be selected: Images captured with the Picture Style set to [Monochrome], multiple-exposure images, cropped images, and images shot with another camera.
Selecting and Shooting with Custom White Balances Setting from the menu 1. Select the custom white balance number. (1) Registered image On the [Set Custom WB] screen, select the number of the registered custom white balance. 2. Select [Set as white balance]. The white balance setting changes to [ 3. *]. Take the picture. The picture is taken with the [ 225 *] setting applied.
Setting from the Quick Control screen 1. Press the < > button. Select the white balance setting item. 2. Select [Custom]. 3. Select the custom white balance number. Turn the < > dial to select a number from 1 to 5, then press the < > button. 4. Take the picture.
Naming Custom White Balances You can add a name (caption) to the five registered custom white balances (custom white balance nos. 1–5). 1. Select the custom white balance number. On the [Set Custom WB] screen, select the number of the registered custom white balance to add a name to. 2. Select [Edit WB name].
3. Enter text. Use < >, < to enter it. By selecting [ >, or < > to select a character, then press < ], you can change the input mode. To delete single characters, select [ 4. ] or press the < > button. Exit the setting. Press the < > button, then press [OK]. The information is saved, and display returns to the screen in step 2. The entered name is displayed below [ *].
White Balance Correction White Balance Correction White Balance Auto Bracketing You can correct the white balance that is set. This adjustment will have the same effect as using a commercially available color temperature conversion filter or color compensating filter. White Balance Correction 1. Select [ : WB Shift/Bkt.].
2. Set the white balance correction. Sample setting: A2, G1 Use < > to move the “■” mark on the screen to your preferred position. B is for blue, A for amber, M for magenta, and G for green. White balance is corrected in the direction you move the mark. The direction and amount of correction are indicated in the upper right of the screen. Pressing the < Press < > button will cancel all the [WB Shift/Bkt.] settings. > to exit the setting.
White Balance Auto Bracketing White balance bracketing enables you to capture three images at once with different color tones. Setting the white balance bracketing amount In step 2 for White Balance Correction, when you turn the < > dial, the “■” mark on the screen will change to “■ ■ ■” (3 points). Turning the dial clockwise sets the B/A bracketing, and turning it counterclockwise sets the M/G bracketing.
Note The images will be bracketed in the following sequence: 1. Standard white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard white balance, 2. Magenta (M) bias, and 3. Green (G) bias. You can also set white balance correction and AEB together with white balance bracketing. If you set AEB in combination with white balance bracketing, a total of nine images will be recorded for a single shot. The white balance icon blinks to indicate that white balance bracketing has been set.
Color Space Adobe RGB The range of reproducible colors is called the “color space.” For normal shooting, sRGB is recommended. 1. Select [ 2. Set a color space option. : Color space]. Select [sRGB] or [Adobe RGB], then press < >. Adobe RGB This color space is mainly used for commercial printing and other professional applications. Recommended when using equipment such as Adobe RGB-compatible monitors or DCF 2.0 (Exif 2.21 or later) compatible printers.
Picture Style Selection Picture Style Characteristics Symbols Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. 1. Select [ 2. Select a Picture Style. : Picture Style].
Picture Style Characteristics Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor, and sunset scenes. Note If the desired color tone is not obtained with [Auto], use another Picture Style. Standard The image looks vivid, sharp, and crisp. Suitable for most scenes. Portrait For smooth skin tones, with slightly less sharpness. Suited for close-up portraits.
User Def. 1–3 You can add a new style based on presets such as [Portrait] or [Landscape] or a Picture Style file, then adjust it as needed ( ). With any User Defined Picture Style that has not yet been registered, pictures will be taken with the same characteristics settings as with the default settings of [Standard].
Symbols Icons on the Picture Style selection screen represent [Strength], [Fineness], and [Threshold] for [Sharpness] as well as [Contrast] and other parameters. The numbers indicate the values for these settings specified for the respective Picture Style. Sharpness Strength Fineness Threshold Contrast Saturation Color tone Filter effect (Monochrome) Toning effect (Monochrome) Caution For movie recording, “*, *” is indicated for the [Fineness] and [Threshold] parameters of [Sharpness].
Picture Style Customization Settings and Effects Monochrome Adjustment You can customize any Picture Style by changing it from the default settings. For details on customizing [Monochrome], see Monochrome Adjustment. 1. Select [ 2. Select a Picture Style. : Picture Style]. Select the Picture Style to adjust, then press the < 238 > button.
3. Select an option. Select an option, then press < >. For details on settings and effects, see Settings and Effects. 4. Set the effect level. Adjust the effect level, then press < >. Press the < > button to save the adjusted setting and return to the Picture Style selection screen. Any settings you change from default values are displayed in blue.
Note For movie recording, [Fineness] and [Threshold] for [Sharpness] cannot be set (not displayed). By selecting [Default set.] in step 3, you can restore the parameter settings of the respective Picture Style to the defaults. To shoot with the Picture Style you adjusted, first select the adjusted Picture Style, then shoot.
Monochrome Adjustment Filter effect Even with the same monochrome image, you can make white clouds, green trees, or other elements stand out more by applying a filter effect. Filter Sample Effects N:None Normal black-and-white image with no filter effects. Ye:Yellow Blue sky will look more natural, and white clouds will look crisper. Or:Orange The blue sky will look slightly darker. The sunset will look more brilliant. R:Red The blue sky will look quite dark.
Picture Style Registration You can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User Def. 1] – [User Def. 3]. Useful when creating several Picture Styles with different settings. Picture Styles that you have registered on the camera using EOS Utility (EOS software, ) can also be modified here. 1. Select [ 2. Select [User Def.]. : Picture Style]. Select [User Def. *], then press the < 242 > button.
3. Press < >. With [Picture Style] selected, press < 4. >. Select a base Picture Style. Select the base Picture Style, then press < >. Also select styles this way when adjusting styles registered to the camera with EOS Utility (EOS software). 5. Select an option. Select an option, then press < 243 >.
6. Set the effect level. Adjust the effect level, then press < >. For details, see Picture Style Customization. Press the < > button to save the adjusted setting and return to the Picture Style selection screen. The base Picture Style will be indicated on the right of [User Def. *]. Blue style names in [User Def. *] have been changed from default values. Caution If a Picture Style is already registered under [User Def.
Clarity You can adjust image clarity, as determined by the contrast of image edges. Set toward the negative end to make images look softer or toward the positive end for a sharper appearance. 1. Select [ 2. Set the effect level. : Clarity]. Caution Setting clarity may darken or lighten the areas around boundaries in high-contrast images. The effect of this setting is not shown in images on the screen in still photo shooting.
Lens Aberration Correction Peripheral Illumination Correction Distortion Correction Digital Lens Optimizer Chromatic Aberration Correction Diffraction Correction Vignetting, image distortion, and other issues may be caused by lens optical characteristics. The camera can compensate for these phenomena by using [Lens aberration correction]. 1. Select [ 2. Select an option. : Lens aberration correction].
3. Select a setting. Confirm that the name of the attached lens and [Correction data available] are displayed. If [Correction data not available] or [ Optimizer. ] is displayed, see Digital Lens Peripheral Illumination Correction Vignetting (dark image corners) can be corrected. Caution Depending on shooting conditions, noise may appear on the image periphery. The higher the ISO speed, the lower the amount of correction will be.
Distortion Correction Distortion (image warping) can be corrected. Caution To correct distortion, the camera captures a narrower image area than the area seen in viewfinder shooting, which crops the image a little and slightly lowers the apparent resolution. Applying distortion correction may change the angle of view slightly. The amount of image cropped may vary between still photos and movies. Note With RF lenses, distortion correction during movie recording is supported.
Digital Lens Optimizer Various aberrations from lens optical characteristics can be corrected, along with diffraction and low-pass filter-induced loss of resolution. If [Correction data not available] or [ ] is displayed by [Digital Lens Optimizer], you can use EOS Utility to add the lens correction data to the camera. For details, refer to the EOS Utility Instruction Manual. Caution Image processing after you shoot takes longer when set to [High] (which causes the access lamp to be illuminated longer).
Chromatic Aberration Correction Chromatic aberration (color fringing around subjects) can be corrected. Note [Chromatic aberr corr] is not displayed when [Digital Lens Optimizer] is set to [Standard] or [High].
Diffraction Correction Diffraction (loss of sharpness caused by the aperture) can be corrected. Caution Depending on shooting conditions, noise may be intensified together with the effects of correction. The higher the ISO speed, the lower the amount of correction will be. Note “Diffraction correction” corrects degraded resolution not only from diffraction but also from the low-pass filter and other factors. Thus, correction is also effective for exposures with the aperture wide open.
Note General notes for lens aberration correction Effects of lens aberration correction vary by lens and shooting conditions. Also, the effect may be difficult to discern depending on the lens used, shooting conditions, etc. If the correction is difficult to discern, magnifying and checking the image after shooting is recommended. Corrections are applied even when an extender or life-size converter is attached.
Long Exposure Noise Reduction Noise such as dots of light or banding that tends to occur in long exposures at shutter speeds of one sec. or slower can be reduced. 1. Select [ 2. Set a reduction option. : Long exp. noise reduction]. Auto For images exposed for 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected. This setting is effective enough in most cases. Enable Noise reduction is performed for all images exposed for 1 sec. or longer.
Caution With [Auto] or [Enable] set, noise reduction after you shoot may take as long as exposure for the shot. Images may look grainier with the [Enable] setting than with the [Disable] or [Auto] setting. [BUSY] is displayed as noise is reduced, and the shooting screen is not displayed until processing is finished, when you can shoot again.
High ISO Speed Noise Reduction You can reduce the image noise generated. This function is especially effective when shooting at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. 1. Select [ 2. Set the level. : High ISO speed NR]. Low / Standard / High The camera applies an amount of noise reduction corresponding to your specified level.
Caution Precautions on Multi Shot Noise Reduction If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. Be careful about camera shake in handheld shots. Using a tripod is recommended. If you shoot a moving subject, the moving subject may leave afterimages. Auto image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
Dust Delete Data Acquisition Preparation Dust Delete Data Appending Dust Delete Data used to erase dust spots can be appended to images in case sensor cleaning leaves dust on the sensor. The Dust Delete Data is used by Digital Photo Professional (EOS software) to erase the dust spots automatically. Preparation Use an RF or EF lens. Prepare a solid white object such as a sheet of paper. Set the lens focal length to 50 mm or longer. Set the lens's focus mode switch to < > and set the focus to infinity (∞).
2. Select [OK]. After the automatic self-cleaning of the sensor is performed, a message will appear. Although there will be a mechanical sound of the shutter during the cleaning, no picture is taken.
3. Shoot a plain white object. Shoot with a plain white object (such as a new sheet of white paper) filling the screen, at a distance of 20–30 cm (0.7–1.0 ft.). Since the image will not be saved, the data can still be obtained even if there is no card in the camera. When the picture is taken, the camera will start collecting the Dust Delete Data. When the Dust Delete Data is obtained, a message will appear. If the data is not obtained successfully, an error message will appear.
Dust Delete Data Appending The camera will append the Dust Delete Data obtained to all shots from now on. Acquiring Dust Delete Data before shooting is recommended. For details about using Digital Photo Professional (EOS software) to erase dust spots automatically, refer to the Digital Photo Professional Instruction Manual. File size is essentially unaffected by Dust Delete Data appended to images.
Multiple Exposures Merging Multiple Exposures with a JPEG Image Recorded on the Card Checking and Deleting Multiple Exposures During Shooting As you shoot multiple exposures (2–9), you can see how the images will be merged into a single image. 1. Select [ : Multiple exposure].
2. Set [Multiple exposure]. Select an option, then press < >. To exit shooting multiple exposures, select [Disable]. On:Func/Ctrl Convenient when shooting multiple exposures gradually as you check the results. During continuous shooting, the continuous shooting speed will decrease greatly. On:ContShtng Used for continuous multiple exposures of moving subjects.
3. Set [Multi-expos ctrl]. Select a merging option, then press < >. Additive The exposure of each single image captured is added cumulatively. Based on [No. of exposures], set negative exposure compensation. Follow these basic guidelines to set the exposure compensation amount. Exposure compensation setting guidelines, by number of exposures Two exposures: –1 stop, three exposures: –1.5 stops, four exposures: –2 stops Average Based on the [No.
4. Set [No. of exposures]. Select the number of exposures, then press < 5. >. Specify the images to save. To save all single exposures and the multiple-exposure image, select [All images] and press < >. To save only the multiple-exposure image, select [Result only] and press < >.
6. Set [Continue Mult-exp]. Select an option, then press < >. With [1 shot only], multiple-exposure shooting will be canceled automatically after the shooting ends. With [Continuously], multiple-exposure shooting continues until the setting in step 2 is set to [Disable]. 7. Shoot the first exposure. When [On:Func/Ctrl] is set, the captured image will be displayed. The [ ] icon blinks. The number of remaining exposures is indicated on the screen (1) for reference. Pressing the < ( ).
8. Shoot the next exposures. Images captured so far are displayed merged. For only image display, press the < > button repeatedly. Multiple-exposure shooting will end when the set number of exposures are taken. Note With [On:Func/Ctrl], you can press the < > button to view the multipleexposure image so far or delete the previous single exposure ( ). As shooting information, the multiple-exposure image has information captured for the last shot.
1. Select [Select image for multi. expo.]. 2. Select the first image. Turn the < > dial to select the first image, then press < >. Select [OK]. The file number of the selected image will be displayed at the bottom of the screen.
3. Take the picture. When you select the first image, the number of remaining exposures as set with [No. of exposures] will decrease by 1. Images you can select You can select a JPEG image shot at the same angle of view as the first selected JPEG.
Checking and Deleting Multiple Exposures During Shooting To view the multiple-exposure image so far, check exposure, and see how the images are merged, you can press the < > button before you finish shooting your specified number of exposures (when [On:Func/Ctrl] is set, but not with [On:ContShtng]). Pressing the < > button will display the operations possible during multiple-exposure shooting.
FAQ Are there any restrictions on the image quality? ] images. Even when [ : Img type/ Multiple exposures are captured as JPEG [ size] is set to RAW only, these images are captured as JPEG [ ] images. Can I merge images recorded on the card? With [Select image for multi. expo.], you can select the first single exposure from the images recorded on the card ( ). Note that you cannot merge multiple images already recorded on the card.
Focus Bracketing Focus bracketing enables continuous shooting with the focal distance changed automatically after each shot. From these images, you can create a single image in focus over a wide area by using an application that supports depth compositing, such as Digital Photo Professional (EOS software). 1. Select [ 2. Set [Focus bracketing]. : Focus bracketing]. Select [Enable].
3. Set [Number of shots]. Specify the number of images captured per shot. Can be set in a range of [2]–[999]. 4. Set [Focus increment]. Specify how much to shift the focus. This amount is automatically adjusted to suit the aperture value at the time of shooting. Larger aperture values increase the focus shift and make focus bracketing cover a wider range under the same focus increment and number of shots. After completing the settings, press < 272 >.
5. Set [Exposure smoothing]. You can suppress changes in image brightness during focus bracketing by setting [Exposure smoothing] to [Enable], which compensates for differences between the displayed and actual aperture value (effective f/number), which varies by focal position. 6. Take the picture. To save your shots in a new folder, tap [ ] and select [OK]. Focus at the nearer end of your preferred focal range, then press the shutter button completely.
Caution Focus bracketing is intended for still photo shooting on a tripod. Shooting with a wider angle of view is recommended. After depth compositing, you can crop the image if necessary. For details on lenses compatible with this feature, visit the Canon website. Set [Exposure smoothing] to [Disable] with the following lenses, because they may cause changes in image brightness. • EF100mm f/2.8L Macro IS USM • EF180mm f/3.5L Macro USM • EF-S60mm f/2.
Interval Timer Shooting With the interval timer, you can set the shooting interval and number of shots, so that the camera takes individual shots repeatedly according to your interval until your specified number of shots are taken. 1. Select [ 2. Select [Enable]. : Interval timer]. Select [Enable], then press the < 275 > button.
3. Set the shooting interval and number of shots. Select an option to set (hours : minutes : seconds / number of shots). Press < > to display [ ]. Set the desired number, then press < >. (Returns to [ ].) Interval Can be set in a range of [00:00:01]–[99:59:59]. No. of shots Can be set in a range of [01]–[99]. To keep the interval timer on indefinitely until you stop it, set [00]. 4. Select [OK]. The interval timer settings will be displayed on the menu screen.
5. Take the picture. First shot is taken and shooting continues according to the interval timer settings. During interval timer shooting, [ ] will blink. After the set number of shots are taken, the interval timer shooting will stop and be automatically canceled. Note Using a tripod is recommended. Taking test shots in advance is recommended. Even during interval timer shooting, you can still shoot as usual by pressing the shutter button completely.
Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. With the lens's focus mode switch set to < >, the camera will shoot even when > and focusing autofocusing is not possible. Consider setting the mode to < manually before shooting. If the shooting time is long, using the household power outlet accessories (sold separately) is recommended.
Silent Shutter Function Disables shutter release sounds, operating sounds, and firing and illumination of the flash and other light sources. The following settings are used and cannot be changed.
Shutter Mode You can choose the method of shutter release. 1. Select [ 2. Select an option. : Shutter mode]. Mechanical Shooting activates the mechanical shutter. Elec. 1st-curtain Shooting only activates the second-curtain shutter. Electronic Enables reduced sound and vibration from shutter operations, compared to mechanical shutter or electronic first-curtain. • A white frame is displayed when you press the shutter button halfway. • Shutter operations are accompanied by beeps.
Caution Defocused image areas may be incomplete when shooting near maximum aperture at high shutter speeds, depending on shooting conditions. If you dislike the appearance of defocused image areas, shooting as follows may give better results. • Shoot with an option other than [Elec. 1st-curtain]. • Lower the shutter speed. • Increase the aperture value. Setting [ : Silent shutter function] to [On] sets the shutter mode to [Electronic].
Releasing Shutter without Card You can set the camera not to shoot unless there is a card in the camera. The default setting is [Enable]. 1. Select [ 2. Select [Disable]. : Release shutter without card].
Image Stabilizer (IS Mode) Focal Length This menu is displayed for configuration of camera IS mode settings when you are using a non-IS lens. The menu is not shown when IS-equipped lenses are used. In that case, setting the lens Image Stabilizer switch to < > combines stabilization by the lens and camera. 1. Select [ 2. Select [IS mode]. : IS (Image Stabilizer) mode]. Select [On] to use IS mode on the camera.
3. Select [Still photo IS]. [Always]: Provides constant image stabilization. [Only for shot]: Image stabilization is active only at the moment of shooting. Caution [ : IS (Image Stabilizer) mode] is not displayed when an IS-equipped lens is attached. In some cases, this may not provide sufficient stabilization for certain lenses. Note For details on image stabilization for movie recording, see Movie Digital IS.
1. Select [Focal length]. 2. Set the focal length. Turn the < Press < > dial to select the digit of the focal length. > to display [ ]. Set the desired number, then press < 3. >. (Returns to [ ].) Select [OK]. Caution Set [ : Release shutter w/o lens] to [Enable]. [Disable] prevents image stabilization. [Focal length] is not displayed when lenses are attached that support lens communication. Note Focal length can be set in a range of 1–1000 mm (in 1 mm increments).
Customizing Quick Controls Resetting the Custom Quick Control Screen or Clearing All Items Quick Control items and the layout are customizable. 1. Select [ 2. Select [Edit layout]. : Customize Quick Controls].
3. Select items to remove. Turn the < > dial or use < press < >. > to select an item to remove, then Items shown on the Quick Control screen are labeled with a checkmark. You can remove the items labeled with a checkmark. 4. Select items to add. Turn the < < >. > dial or use < > to select an item to add, then press To change the layout, press the < 287 > button.
5. Change the layout. Use the < > dial to select an item to move, then press < Use the < > dial to move the item, then press < Press the < 6. > button to exit setup. Select [Save and exit]. 288 >. >.
7. Review the screen. Press the < > button to check the screen with your settings applied. Resetting the Custom Quick Control Screen or Clearing All Items Select [Reset settings] to restore the default Quick Control screen items and layout. Select [Clear all items] to remove all items from the layout, so that no Quick Control > button is pressed.
Shooting with the Touch Shutter Just by tapping the screen, you can focus and take the picture automatically. 1. Enable the Touch Shutter. Tap [ ] in the lower left of the screen. Each time you tap the icon, it will toggle between [ ] and [ ]. [ ] (Touch Shutter: Enable) The camera will focus on the spot you tap, then the picture will be taken. [ ] (Touch Shutter: Disable) You can tap a spot to perform focusing on the spot. Press the shutter button completely to take the picture.
2. Tap the screen to shoot. Tap the face or subject on the screen. On the point you tap, the camera focuses (Touch AF) using your specified AF Area. When [ ] is set, the AF point turns green when focus is achieved, then the picture is taken automatically. If focus is not achieved, the AF point turns orange and the picture cannot be taken. Tap the face or subject on the screen again. Caution The camera shoots in single shooting mode regardless of the drive mode setting ], or [ ]).
Image Review Review Duration Viewfinder Display Review Duration To keep the image displayed immediately after you shoot, set to [Hold], and if you prefer not to have the image displayed, set to [Off]. 1. Select [ 2. Select [Review duration]. 3. Set a time option. : Image review].
Note When [Hold] is set, images are displayed as long as the time set in the [Screen off] option of [ : Power saving].
Viewfinder Display Set to [Enable] for viewfinder display of your shots immediately after you shoot. 1. Select [ 2. Select [Viewfinder display]. 3. Select an option. : Image review]. Note [Viewfinder display] settings take effect when [Image review] is set to an option other than [Off].
High-Speed Display High-speed display that switches between each shot and the live image is available when shooting in [ ] (high-speed continuous shooting) drive mode and in a shutter mode other than electronic shutter. 1. Select [ 2. Select an option. : High speed display]. Select [Enable] for display that switches between each shot and the live image.
Caution Images may waver or flicker during high-speed display. This occurs more often at high shutter speeds. However, this does not affect shooting results. High-speed display is not performed for shutter speeds slower than 1/30 sec., aperture values higher than f/11, conditions that make autofocusing difficult, flash photography, or ISO expansion. It may also stop as you are shooting. High-speed display is not available in the following cases. • With [ • With [ : OVF sim.
Metering Timer You can set how long the metering timer runs (which determines the duration of exposure value display/AE lock) after it is triggered by an action such as pressing the shutter button halfway. 1. Select [ 2. Set a time option. : Metering timer].
Display Simulation With display simulation, display of image brightness and depth of field more closely matches the actual brightness (exposure) of your shots. 1. Select [ 2. Select an option. : Display simulation]. Exposure+DOF ( ) Image brightness and depth of field as displayed closely matches the actual brightness (exposure) of your shots. If you set exposure compensation, the image brightness will change accordingly. Similarly, changes to the aperture value will alter the depth of field.
Disable ( ) The image is displayed at standard brightness, so it is easy to see. Even if you set exposure compensation, the image is displayed at the standard brightness. Caution Notes on [Exposure+DOF] Display may flicker at some shutter speeds. With EF lenses, this setting may increase the shutter-release time lag. The depth of field shown is only a guideline. For more precise indication of the depth of field, press the depth-of-field preview button. [Exposure+DOF] is not available with some lenses.
Optical Viewfinder Simulation Natural-looking viewfinder and screen display, resembling the view from an optical viewfinder, is available in still photo shooting. Note that images displayed with this feature set to [On] may differ from actual shooting results. 1. Select [ 2. Select an option. : OVF sim. view assist]. Caution Setting this feature to [On] sets [ : Display simulation] to [Disable]. Optical viewfinder simulation is used for display when this feature is set to [On] in HDR shooting.
Note Not available when the camera is set to shoot multiple exposures.
Shooting Information Display Customizing Information on the Screen Customizing Information in the Viewfinder Viewfinder Vertical Display Grid Histogram Lens Information Display Vertical Exposure Level Indicator Flicker Detection Display Clearing Settings You can customize the details and screens of information shown on the screen or in the viewfinder when you shoot. Customizing Information on the Screen 1. Select [ : Shooting info. disp.].
2. Select [Screen info. settings]. 3. Select screens. Turn the < camera. > dial to select screens of information to show on the For information you prefer not to display, press < checkmark [ ]. To edit the screen, press the < 303 > button.
4. Edit the screen. Turn the < > dial to select options to show on the screen of information. For items you prefer not to display, press < [ ]. Select [OK] to register the setting.
Customizing Information in the Viewfinder 1. Select [ 2. Select [VF info/toggle settings]. 3. Select screens. : Shooting info. disp.]. Turn the < viewfinder. > dial to select information screens to show in the For information you prefer not to display, press < checkmark [ ]. To edit the screen, press the < 305 > button.
4. Edit the screen. Turn the < > dial to select options to show in the viewfinder. For items you prefer not to display, press < [ ]. Select [OK] to register the setting.
Viewfinder Vertical Display You can select how viewfinder information is displayed when you are shooting still photos vertically. 1. Select [ 2. Select [VF vertical display]. : Shooting info. disp.].
3. Select an option. On Information is automatically rotated, making it easier to read. Off Information is not automatically rotated.
Grid A grid can be displayed on the screen and viewfinder. 1. Select [ 2. Select [Grid display]. 3. Select an option. : Shooting info. disp.].
Histogram You can select the content and display size of the histogram. 1. Select [ 2. Select [Histogram disp]. 3. Select an option. : Shooting info. disp.]. Select the content ([Brightness] or [RGB]) and display size ([Large] or [Small]).
Lens Information Display You can display information about the lens in use. 1. Select [ 2. Select [Lens info display]. : Shooting info. disp.].
3. Select an option. Focus distance disp You can display focus distance when using RF lenses. In focus distance display, you can select the timing and unit of measurement. Focal length disp You can display the focal length of the lens in use. SA variable amount You can display the amount of correction set when using lenses featuring spherical aberration control.
Vertical Exposure Level Indicator You can show or hide the vertical exposure level indicator displayed on the right side of the screen. 1. Select [ 2. Select [Vertical exp level]. : Shooting info. disp.]. Select [On] when using metered manual flash with an external flash unit. The vertical exposure level indicator is shown while the metering timer is active. Note When set to [On], the metering level is shown in real time on the exposure level indicator in all shooting modes except [ ].
Flicker Detection Display You can specify whether to show the [ ] icon in shooting information display. 1. Select [ 2. Select [Flicker detect disp]. : Shooting info. disp.]. On The [ ] icon is displayed under the following conditions. • With [ The [ : Anti-flicker shoot.] set to [Enable]: ] icon is illuminated when flicker is detected. • With [ The [ : Anti-flicker shoot.] set to [Disable]: ] icon blinks when flicker is detected. Off The [ ] icon is not displayed.
Clearing Settings 1. Select [ 2. Select [Reset]. 3. Select [OK]. : Shooting info. disp.].
Viewfinder Display Format You can select how information is presented in the viewfinder. 1. Select [ 2. Select an option. : VF display format].
Display Performance You can select the performance parameter to prioritize in shooting screen display for still photos. 1. Select [ 2. Select an option. : Disp. performance]. When set to [Smooth] By pressing the < > button to add a checkmark, you can include low-light locations in the scenarios for suppressing lower display frame rates.
Caution Shooting under low light with [Suppress lower frame rate] set for shooting screen display may affect performance as follows.
Metering Mode Selection You can select one of four methods to measure the subject brightness. Setting with the < > button 1. Press the < 2. Select the metering mode. Turn the < > button ( ). > dial to make a selection.
Setting with the < 1. > button Press the < > button ( ). With an image displayed, press the < 2. > button. Select the metering mode. To select an item, turn the < > dial or press < To select the metering mode, turn the < > left or right. < 320 > or < > up or down.
Setting via the menu 1. Select [ 2. Select the metering mode. : Metering mode]. Evaluative metering General-purpose metering mode suited even for backlit subjects. The camera adjusts the exposure automatically to suit the scene. Partial metering Effective where there are much brighter lights around the subject due to backlight, etc. Spot metering Effective when metering a specific part of the subject. The spot metering area is indicated on the screen.
Center-weighted average The metering across the screen is averaged, with the center of the screen weighted more heavily. Note By default, the camera will set the exposure as follows. With [ ], holding down the shutter button halfway locks the exposure value (AE lock) after the camera focuses with One-Shot AF. With [ / / ], the exposure value is set at the moment the picture is taken (without locking the exposure value when the shutter button is pressed halfway). With [ : AE lock meter.
Manual Exposure Compensation Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation is available in [ ], [ ], [ ], [ ], and [ ] modes. For details on exposure compensation when [ ] mode and ISO Auto are both set, see M: Manual Exposure, and see Fv: Flexible-Priority AE for [ ] mode. 1. Check the exposure. Press the shutter button halfway and check the exposure level indicator. 2. Set the compensation amount.
Note The exposure compensation amount will remain in effect even after you set the power switch to < >.
Exposure Lock (AE Lock) AE Lock Effects You can lock the exposure when you want to set the focus and exposure separately or when you will take multiple shots at the same exposure setting. Press the < > button to lock the exposure, then recompose and take the picture. This is called AE lock. It is effective for shooting backlit subjects, etc. 1. Focus on the subject. Press the shutter button halfway. The exposure value will be displayed. 2. Press the < > button ( ).
3. Recompose and take the picture. When you are to take more pictures while maintaining the AE lock, keep holding down the < > button and press the shutter button to take another picture. Note AE lock is not possible with bulb exposures. AE Lock Effects Metering Mode Selection AF Point Selection Automatic Selection Exposure centered on the AF point in focus is locked. Manual Selection Exposure centered on the selected AF point is locked. Center-weighted exposure is locked. * When [ locked.
General Still Photo Shooting Information Display General Still Photo Shooting Precautions Information Display For details on the icons displayed for still photo shooting, see Information Display. Note White display of the [ ] icon indicates that your shots will be about as bright as the image displayed. If the [ ] icon is blinking, it indicates that the image is displayed at a brightness that differs from the actual shooting result because of low- or bright-light conditions.
General Still Photo Shooting Precautions Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. Image quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. Shooting in high temperatures may cause noise and irregular colors in the image.
Images and display Under low- or bright-light conditions, the displayed image may not reflect the brightness of the captured image. Although noise may be noticeable in images under low light (even at low ISO speeds), there will be less noise in your shots, due to differences in image quality between displayed and captured images. The screen may flicker if the light source (lighting) changes. In this case, stop shooting temporarily and resume under the light source you will use.
Movie Recording To prepare for movie recording, set the still photo shooting/movie recording switch to < >, then press the < > button and choose a recording mode. Caution When switching from still photo shooting to movie recording, check the camera settings again before recording movies. Note You can record movies by pressing the movie shooting button during still photo shooting.
Tab Menus: Movie Recording Shooting 1 (1) Movie rec. size (2) High Frame Rate (3) Movie rec. format (4) Movie cropping (5) Sound recording Shooting 2 (1) Exposure comp.
Shooting 3 (1) HF anti-flicker shooting (2) Av 1/8-stop incr.
Shooting 5 (1) Lens aberration correction (2) High ISO speed NR Shooting 6 (1) Movie self-timer (2) Remote control 333
Shooting 7 (1) IS (Image Stabilizer) mode (2) Customize Quick Controls (3) Shutter btn function for movies (4) Metering timer (5) Zebra settings (6) Shooting info. disp. (7) VF display format Shooting 8 (1) Auto pwr off temp. (2) Standby: Low res.
Movie Recording Autoexposure Recording Shutter-Priority AE Aperture-Priority AE ISO Speed in [ ]/[ ]/[ ] Mode Manual Exposure Recording ISO Speed in [ ] Mode Shutter Speed Still Photo Shooting Information Display (Movie Recording) 335
Autoexposure Recording Exposure is controlled automatically to suit the brightness. 1. Set the recording mode to [ Press the < 2. ]. > button, then turn the < > dial to select [ ]. Focus on the subject. Before recording a movie, focus with AF ( ) or manual focus ( ). By default, [ : Movie Servo AF] is set to [Enable] so that the camera always keeps focusing ( ). When you press the shutter button halfway, the camera focuses using your specified AF area.
3. Record the movie. Press the movie shooting button to start recording a movie. You can also start recording a movie by tapping [ ] on the screen. While the movie is being recorded, the [ REC] icon (1) will be displayed in the upper right of the screen. Sound is recorded by the microphone (2). To stop recording, press the movie shooting button again. You can also stop recording a movie by tapping [ ] on the screen.
Shutter-Priority AE [ ] recording mode enables you to set your preferred shutter speed for movies. ISO speed and aperture values are set automatically to suit the brightness and obtain standard exposure. 1. Set the recording mode to [ Press the < [ ]. 2. ]. > button, then turn the < > dial to select Set the shutter speed (1). Set it by looking at the screen as you turn the < Available shutter speeds vary by frame rate ( 338 > dial. ).
3. Focus and record the movie. Same as steps 2 and 3 for Autoexposure Recording. Caution Avoid adjusting shutter speed while recording movies, which will record changes in exposure. When recording a movie of a moving subject, a shutter speed of approx. 1/25 sec. to 1/125 sec. is recommended. The faster the shutter speed, the less smooth the subject's movement will look. If you change the shutter speed while recording under fluorescent or LED lighting, image flicker may be recorded.
Aperture-Priority AE [ ] recording mode enables you to set your preferred aperture value for movies. ISO speed and shutter speed are set automatically to suit the brightness and obtain standard exposure. 1. Set the recording mode to [ Press the < 2. ]. > button, then turn the < > dial to select [ Set the aperture value (1). Set it by looking at the screen as you turn the < 340 > dial. ].
3. Focus and record the movie. Same as steps 2 and 3 for Autoexposure Recording. Caution Avoid adjusting the aperture value while recording movies, which will record changes in exposure caused by aperture adjustment. Note Notes for [ ], [ ], and [ ] modes You can lock the exposure (AE lock) by pressing the < > button. After applying AE lock during movie recording, you can cancel it by pressing the < > button. > button.
ISO Speed in [ ]/[ ]/[ ] Mode ISO speed is set automatically. See ISO Speed in Movie Recording.
Manual Exposure Recording You can manually set the shutter speed, aperture value, and ISO speed for movie recording. 1. Set the recording mode to [ Press the < ]. > button, then turn the < 343 > dial to select [ ].
2. Set the shutter speed, aperture value, and ISO speed. Press the shutter button halfway and check the exposure level indicator. Turn the < > dial to set the shutter speed (1), the < > dial to set > dial to set the ISO speed (3). the aperture value (2), and the < Available shutter speeds vary by frame rate ( 344 ).
3. Focus and record the movie. Same as steps 2 and 3 for Autoexposure Recording. Caution ISO speed cannot be expanded to L (equivalent to ISO 50) in movie recording. During movie recording, avoid changing the shutter speed, aperture value, or ISO speed, which may record changes in the exposure or create more noise at high ISO speeds. When recording a movie of a moving subject, a shutter speed of approx. 1/25 sec. to 1/125 sec. is recommended.
ISO Speed in [ ] Mode You can set the ISO speed manually or select [ ISO speed, see ISO Speed in Movie Recording. 346 ] to set it automatically.
Shutter Speed Available shutter speeds in [ ] and [ specified movie recording quality. ] mode vary depending on the frame rate of your Shutter Speed (Sec.
Still Photo Shooting Still photo shooting is not supported in movie recording mode. To shoot still photos, stop recording and change the [Shooting mode] setting to still photos first.
Information Display (Movie Recording) For details on the icons on the movie recording screen, see Information Display.
Movie Recording Size 4K Movie Recording Image Area Cards That Can Record Movies Movie Files Exceeding 4 GB Total Movie Recording Time and File Size Per Minute You can set the recording size, frame rate, and compression method in [ : Movie rec. size]. The frame rate displayed on the [Movie rec. size] screen switches automatically depending on the [ : Video system] setting ( ).
Note To obtain better performance with the card, formatting the card with the camera before recording movies is recommended ( ). Movies cannot be recorded in HD or VGA quality. 4K Movie Recording Recording 4K movies requires a stable card with a fast writing speed. For details, see Cards That Can Record Movies. 4K or High Frame Rate movie recording greatly increases the processing load, which may increase the internal camera temperature faster or higher than for regular movies.
Image Area The movie image area varies depending on factors such as movie recording quality and cropped shooting settings and the lens used. RF or EF lenses: With [ (1) : Movie cropping] set to [Disable] (4096×2160) (2) (3840×2160) / RF or EF lenses: With [ EF-S lenses (3) (4096×2160) (4) (3840×2160) / (1920×1080) : Movie cropping] set to [Enable] (1920×1080) Caution Recording with Movie digital IS ( the screen.
Frame rate (fps: frames per second) [ ] 119.9 fps/[ ] 59.94 fps/[ ] 29.97 fps For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). For [ ], see High Frame Rate. [ ] 100.00 fps/[ ] 50.00 fps/[ ] 25.00 fps For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.). For [ ], see High Frame Rate. [ ] 24.00 fps/[ ] 23.98 fps Mainly for cinematic purposes. set to [For NTSC]. (23.
Cards That Can Record Movies For details on CFexpress cards that can record at each level of movie recording quality, check the Canon website. See Card performance requirements for details on SD cards. Test cards by recording a few movies to make sure they can record correctly at your specified size ( ). Caution Before recording 4K movies, format cards by selecting [Low level format] in [ : Format card] ( ). If you use a slow-writing card when recording movies, the movie may not be recorded properly.
Movie Files Exceeding 4 GB Using SD/SDHC cards formatted with the camera If you use the camera to format an SD/SDHC card, the camera will format it in FAT32. With a FAT32-formatted card, if you record a movie and the file size exceeds 4 GB, a new movie file will be created automatically. When you play back the movie, you will have to play back each movie file individually. Movie files cannot be played back automatically in consecutive order.
Total Movie Recording Time and File Size Per Minute For details, see Movie recording.
High Frame Rate You can record movies at a high frame rate of 119.9 fps or 100.0 fps. This is ideal for recording movies that will be played back in slow motion. The maximum recording time per movie is 89 min. 29 sec. Movies are recorded in or With [ / ] or [ / : Movie rec. size] set to [ or in quality. ], movies are recorded in quality. Sound is not recorded in High Frame Rate movies. Time code display during movie recording advances 4 sec. per second.
Movie Recording Format You can specify the format of movie files recorded. For RAW+MP4 recording, select [ , ] in the [ Rec options] setting of [ : Record func+card/folder sel.]. 1. Select [ 2. Select an option. : Movie rec. format].
RAW movies RAW movies are raw, unprocessed data from the image sensor that are recorded to the card digitally. Two format options are available for RAW movies, (standard) and (light), as selected in [ : Movie rec. size] ( ). The light option produces RAW movies with smaller file sizes than the standard option. You can use Digital Photo Professional (EOS software) to process RAW movies.
Movie Cropping With RF or EF lenses, movies can be cropped around the center of the image, as if using a telephoto lens. Recording movies with EF-S lenses has the same effect as this movie cropping feature. 1. Select [ 2. Select [Enable]. : Movie cropping]. Caution The center of the screen is further cropped, reducing the recording area, when [ Digital IS] in [ : IS (Image Stabilizer) mode] is set to [On] or [Enhanced].
Sound Recording Sound Recording/Sound-Recording Level Wind Filter Attenuator You can record movies while recording sound with either the built-in microphone or an external one. You can also freely adjust the sound-recording level. Use [ : Sound recording] to set sound recording functions. Caution Sounds from Wi-Fi operations may be captured with built-in or external microphones. During sound recording, using the wireless communication function is not recommended.
Note Audio is also output when the camera is connected to televisions via HDMI, except when [Sound recording] is set to [Disable]. In case of feedback from television audio output, move the camera away from the television or turn down the volume. The volume balance between L/R (left/right) cannot be adjusted. Sound is recorded at a 48 kHz/16-bit sampling rate. Sound Recording/Sound-Recording Level Auto The sound-recording level is adjusted automatically.
Wind Filter Set to [Enable] to reduce wind noise when there is wind outdoors. Only activated when the camera's built-in microphone is used. When the wind filter function takes effect, part of the low bass sounds will also be reduced.
Attenuator Automatically suppresses sound distortion caused by loud noises. Even if [Sound recording] is set to [Auto] or [Manual] for recording, sound distortion may still result if there is a very loud sound. In this case, setting it to [Enable] is recommended. Microphone Any connected external microphone is used instead of the built-in microphone. The following external microphones (sold separately) are recommended.
HDR Movie Recording You can record high dynamic range movies that retain detail in highlights of high-contrast scenes. Note Available when the recording size is set to (PAL). 1. Select [ : (NTSC) or HDR Movie Recording]. Select [Enable]. 2. Record an HDR movie. Record the movie in the same way as normal movie recording. For details on file sizes and the recording time available, see Movie recording.
Caution HDR movie recording is not available with [ : IS (Image Stabilizer) mode] set to [ Digital IS], or when set to [ : Highlight tone priority], [ : Canon Log settings], or [ : HDR shooting ]. Since multiple frames are merged to create an HDR movie, certain parts of the movie may look distorted. This is more noticeable in handheld recording affected by camera shake, so consider using a tripod.
Canon Log Settings Shooting Settings Canon Log Image Quality Canon Log gamma curve takes full advantage of image sensor characteristics to ensure wide dynamic range for movies that will be processed in postproduction. With minimal loss of detail in shadows and highlights, movies retain more visual information across the dynamic range. To work with Canon Log movies in postproduction, you can apply look-up tables (LUTs). LUT data can be downloaded from the Canon website. 1. Select [ 2. Select [Canon Log].
3. Select [On ( 4. Set the options as desired. )] ( ). Set [View Assist.], [Characteristics], and [Color space].
Canon Log On Enables 10-bit recording of Canon Log movies to the card. Movies can also be recorded to an external device that supports 10-bit recording. Note YCbCr 4:2:2 (10-bit) color sampling and the BT.709/BT.2020/Cinema Gamut color space are used in Canon Log recording.
View Assist. When played on the camera, these movies may look darker and have lower contrast than movies recorded with a Picture Style applied, due to Canon Log image characteristics, which are intended to ensure a wide dynamic range. For clearer display that makes it easier to check details, set [View Assist.] to [On]. Setting this feature to [On] does not affect movies recorded to the card, which are recorded using Canon Log characteristics.
Characteristics Adjust as needed. Select an option ([Sharpness: Strength], [Saturation], or [Hue]), adjust the effect level, then press < >. Sharpness: Strength 0: Weak outline emphasis Saturation −4: Low +4: High Reds −4: Toward magenta +4: Toward yellow Greens -4: Toward yellow +4: Toward cyan Blues -4: Toward cyan +4: Toward magenta Hue* 7: Strong outline emphasis * Reds, greens, and blues cannot be adjusted separately. Color space Choose [BT.709], [BT.
Shooting Settings Manually setting the ISO speed to 100–640 will make the dynamic range narrower. Canon Log offers a dynamic range of approx. 1600% at ISO 800 or higher. The following are expanded ISO speeds: ISO 100, 125, 160, 200, 250, 320, 400, 500 and 640. [ ] is displayed when an ISO speed is set.
Canon Log Image Quality With Canon Log, movies may be affected by horizontal banding, depending on the subject or shooting conditions. Record a few test movies and check the results in advance. In particular, noise may become more noticeable if you enhance the contrast when color-grading your movies. With Canon Log, skies, white walls, and similar subjects may be affected by noise or uneven gradation, exposure, or colors.
Movie Self-Timer Movie recording can be started by the self-timer. 1. Select [ 2. Select an option. 3. Record the movie. : Movie self-timer]. After you press the movie shooting button or tap [ ], the camera beeps and displays the number of seconds left before recording. Note To cancel the self-timer, either tap the screen or press < 374 >.
Image Stabilizer (IS Mode) Movie Digital IS The camera's IS mode and movie digital IS features reduce camera shake as movies are recorded. They can provide effective stabilization even when non-IS lenses are used. The [IS mode] menu item is not shown when IS-equipped lenses are used. In that case, setting the lens Image Stabilizer switch to < > combines stabilization by the lens and camera. 1. Select [ 2. Select [IS mode]. : IS (Image Stabilizer) mode]. Select [On] to use IS mode on the camera.
Movie Digital IS 1. Select [ 2. Select a [ : IS (Image Stabilizer) mode]. Digital IS] option. Off ( ) Image stabilization with Movie digital IS is disabled. On ( ) Camera shake will be corrected. The image will be slightly magnified. Enhanced ( ) Compared to when [On] is set, stronger camera shake can be corrected. The image will be more magnified.
Caution Movie digital IS will not function when the lens's optical Image Stabilizer switch is set to < >. With non-IS lenses, setting [ Digital IS] to [On] or [Enhanced] also sets [IS mode] to [On]. Although movies can also be recorded with Movie digital IS when using EF-S lenses or movie cropping, the image area is further reduced. Stabilization by Movie digital IS may be less effective at some movie recording sizes.
Shutter Button Function for Movies You can set the functions performed by pressing the shutter button halfway or completely during movie recording. Caution In movie recording, the [Shutter btn function for movies] setting overrides any function assigned to the shutter button in [ : Customize buttons]. 1. Select [ : Shutter btn function for movies].
2. Select an option. Half-press Specify the function performed by pressing the shutter button halfway. Fully-press Specify the function performed by pressing the shutter button completely. With [Fully-press] set to [Start/stop mov rec], you can start/stop movie recording not only with the movie shooting button but also by pressing the shutter button completely, or by using Remote Switch RS-80N3 (sold separately).
Zebra Settings To help you adjust exposure before or during movie recording, you can display a striped pattern over or around image areas of a specified brightness. 1. Select [ 2. Select [Zebra]. : Zebra settings]. Select [On].
3. Select [Zebra pattern]. [Zebra 1]: Displays left-slanting stripes around areas of the specified brightness. [Zebra 2]: Displays right-slanting stripes over areas that exceed the specified brightness. [Zebra 1+2]: Displays both [Zebra 1] and [Zebra 2]. [Zebra 1] display takes precedence where [Zebra 1] and [Zebra 2] display areas overlap. 4. Set the level. Zebra 1 level Zebra 2 level Set by turning the < > or < 381 > dial or pressing < > up or down.
Note The maximum brightness value does not reach 100% when HDR-PQ is set. Note that the maximum brightness value varies depending on [ : Highlight tone priority] and [ : Picture Style] settings. The maximum brightness value does not reach 100% when Canon Log or an expanded ISO speed is set. Checking the zebra display level in advance is recommended when you will set [Zebra pattern].
Time Code Count Up Start Time Setting Movie Recording Count Movie Play Count HDMI Drop Frame Time codes record the time automatically as movies are recorded. Time codes always record elapsed hours, minutes, seconds, and frames. They are mainly used when movies are edited. To set up the time code, use [ : Time code]. Caution Time codes may not be displayed correctly if your movies are played back on devices other than the camera.
Count Up Rec run The time code advances only during movie recording. Time codes in each movie file recorded continue from the last time code in the previous file. Free run The time code keeps advancing, even when you are not recording. Caution When set to [Free run], time codes are not added to High Frame Rate movies that you record. When set to [Free run], time codes will be affected by any changes to settings for time, zone, or daylight saving time ( ).
Start Time Setting You can set the initial time of the time code. Manual input setting Enables you to set any starting hour, minute, second, and frame. Reset Resets the time set with [Manual input setting] or [Set to camera time] to “00:00:00.” or “00:00:00:” ( ). Set to camera time Matches the hour, minute, and second set as the time on the camera. Sets the frame value to “00.
Movie Recording Count You can select how time is displayed on the movie recording screen. Rec time During recording standby, displays the available recording time. During recording, displays the time that has elapsed since movie recording began (1). Time code Displays the time code during movie recording (2).
Movie Play Count You can select how time is displayed on the movie playback screen. Rec time Displays the recording or playback time during movie playback. Time code Displays the time code during movie playback. Note Time codes are always recorded to movie files (except when High Frame Rate movies are set to [Free run]), regardless of the [Movie rec count] setting. The [Movie play count] setting in [ : Time code] is linked to the [ : Movie play count], so that these settings always match.
HDMI Time code Time codes can be added to movies as you record them to an external device via HDMI. • Off No time code is added to HDMI video output. • On Time codes are added to HDMI video output. When [On] is set, [Rec Command] is displayed. Rec Command For HDMI video output recorded by an external device, you can synchronize recording to when you start and stop recording movies on the camera. • Off Recording is started and stopped by the external device.
Drop Frame The time code's frame count will cause a discrepancy between the actual time and the time code if the frame rate is set to (119.9 fps), (59.94 fps), or (29.97 fps). The discrepancy is corrected automatically when [Enable] is set. Enable Corrects the discrepancy automatically by skipping time code numbers (DF: drop frame). Disable The discrepancy is not corrected (NDF: non-drop frame). Time codes are displayed as follows. • Enable (DF) 00:00:00. (Playback: 00:00:00.
Other Menu Functions [ [ 2] [ 3] [ 4] [ 5] [ 6] [ 7] [ 8] 2] Exposure comp. Exposure compensation can be adjusted in a range of ±3 stops, in 1/3-stop increments. For details on exposure compensation, see Manual Exposure Compensation. ISO speed settings • ISO speed In [ ] mode, you can set the ISO speed manually. You can also select ISO Auto. • ISO speed range You can set the manual ISO speed setting range (minimum and maximum). ISO expansion can also be configured.
Auto Lighting Optimizer Brightness and contrast can be corrected automatically. For details on Auto Lighting Optimizer, see Auto Lighting Optimizer. Highlight tone priority You can reduce overexposed, clipped highlights as you record movies. For details on Highlight tone priority, see Highlight Tone Priority.
[ 3] HF anti-flicker shooting For details on HF anti-flicker shooting, see High-Frequency Anti-Flicker Shooting. Av 1/8-stop incr. You can set aperture values on a finer scale when recording movies with an RF lens. Select [Enable] to change the aperture increment in [ ] or [ ] mode from 1/3 stop (or 1/2 stop) to 1/8 stop. Caution [ Av 1/8-stop incr.] is not available (not displayed) when EF or EF-S lenses are used.
Note Setting to [Disable] is recommended when recording moving subjects under low light, or when afterimages such as trails may occur.
[ 4] White balance For details on white balance, see White Balance. Set Custom WB For details on registering custom white balances, see Custom White Balance. WB correction For details on white balance correction, see White Balance Correction. Picture Style For details on Picture Styles, see Picture Style Selection. Clarity For details on clarity, see Clarity.
[ 5] Lens aberration correction Peripheral illumination, distortion, chromatic aberration, and diffraction can be corrected as you record movies. For details on lens aberration correction, see Lens Aberration Correction. High ISO speed NR For details on High ISO speed noise reduction, see High ISO Speed Noise Reduction.
[ 6] Remote control By setting to [Enable], you can start or stop movie recording using Wireless Remote Control BR-E1 (sold separately).
[ 7] Customize Quick Controls For details on customizing Quick Controls, see Customizing Quick Controls. Metering timer For details on the metering timer, see Metering Timer. Shooting info. disp. For details on configuring shooting information display, see Shooting Information Display. VF display format For details on the viewfinder display format, see Viewfinder Display Format.
[ 8] Auto pwr off temp. Set to [High] to reduce the frequency of the camera automatically turning off due to high card temperature. Standby: Low res. Set to [On] to conserve battery power and control the rise of camera temperature during standby. As a result, it may enable you to record movies over a longer period. Caution Image quality on the standby screen may differ from image quality on the screen during movie recording, but this setting does not affect recording quality.
HDMI display You can specify how movies are displayed as they are recorded via HDMI to an external device. Movie output itself corresponds to the [Movie rec. size] setting. The default setting is [ + ]. • + Enables movie display both on the camera screen and on the other device, via HDMI output. Camera operations such as image playback or menu display are shown on the other device via HDMI, not on the camera screen. • Deactivates the camera screen during output via HDMI, so that the screen is blank.
Caution HDMI output without information prevents display of warnings about the card space, battery level, or high internal temperature ( ) via HDMI. During HDMI output, display of the next image may take some time if you switch between movies of different recording qualities or frame rates. Avoid operating the camera when recording movies to external devices, which may cause information to be displayed in the HDMI video output.
General Movie Recording Precautions Caution Precautions for movie recording Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. If you record something that has fine detail, moire or false colors may result. If [ ] or [ ] is set and the ISO speed or aperture value changes during movie recording, the white balance may also change.
[ ] and [ ] display [ ] may be displayed in hot environments or when factors such recording movies or displaying images on the screen over extended periods increase the camera's internal temperature. If this condition continues, a red [ ] icon will be displayed. Note that the time until a red [ ] appears after the [ ] icon varies depending on shooting conditions. The red [ ] icon indicates that movie recording will soon be terminated automatically.
If you use a card with a slow writing speed, an indicator may appear on the right of the screen during movie recording. The indicator shows how much data has not yet been written to the card (remaining capacity of the internal buffer memory), and it increases more quickly the slower the card is. If the indicator (1) becomes full, movie recording will stop automatically. If the card has a fast writing speed, the indicator will not appear or the level (if displayed) will not increase much.
AF/Drive This chapter describes autofocus operation and drive modes and introduces menu settings on the AF [ ] tab. Note < > stands for autofocus. < > stands for manual focus.
Tab Menus: AF (Still Photos) AF1 (1) AF operation (2) AF area (3) Subject tracking (4) Subject to detect (5) Eye detection (6) Switching tracked subjects Note When lenses without a focus mode switch are used, [Focus mode] is displayed on the [ 1] tab.
AF2 (1) Case 1 (2) Case 2 (3) Case 3 (4) Case 4 (5) Case A (6) Tracking sensitivity (7) Accel./decel. tracking AF3 (1) One-Shot AF release prior.
AF4 (1) Limit AF areas (2) AF area selection control (3) sensitivity- AF pt select (4) Orientation linked AF point AF5 (1) MF peaking settings (2) Focus guide 407
AF6 (1) Electronic full-time MF (2) Lens electronic MF (3) Focus/control ring (4) Focus ring rotation (5) RF lens MF focus ring sensitivity 408
Tab Menus: AF (Movie Recording) AF1 (1) Movie Servo AF (2) AF area (3) Subject tracking (4) Subject to detect (5) Eye detection (6) Switching tracked subjects Note When lenses without a focus mode switch are used, [Focus mode] is displayed on the [ 1] tab. AF2 (1) Movie Servo AF speed (2) Movie Servo AF track sens.
AF3 (1) Lens drive when AF impossible AF4 (1) Limit AF areas (2) AF area selection control (3) sensitivity- AF pt select AF5 (1) MF peaking settings (2) Focus guide 410
AF6 (1) Electronic full-time MF (2) Lens electronic MF (3) Focus/control ring (4) Focus ring rotation (5) RF lens MF focus ring sensitivity 411
AF Operation One-Shot AF for Still Subjects Servo AF for Moving Subjects You can select the AF operation characteristics to suit the shooting conditions or subject. 1. Set the lens's focus mode switch to < 2. Select [ 3. Select an option. : AF operation]. 412 >.
Note If focus is not achieved, the AF point will turn orange. With One-Shot AF, shooting is not possible even by pressing the shutter button completely. Recompose the shot and try to focus again. Or, see Shooting Conditions That Make Focusing Difficult. With Servo AF, the camera shoots even when subjects are not in focus.
One-Shot AF for Still Subjects This AF operation is suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound. The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture. For details on the continuous shooting speed for continuous shooting, see Selecting the Drive Mode.
Servo AF for Moving Subjects This AF operation is suited for moving subjects. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. When focus is achieved, the AF point will turn blue. The beeper will not sound even when focus is achieved. The exposure is set at the moment the picture is taken. For details on the continuous shooting speed for continuous shooting, see Selecting the Drive Mode.
Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie recording. 1. Set the still photo shooting/movie recording switch to < 2. Select [ : Movie Servo AF]. 416 >.
3. Select [Enable]. Enable • The camera focuses on the subject continuously even when you are not pressing the shutter button halfway. • To keep the focus at a specific position, or if you prefer not to record mechanical sounds from the lens, you can temporarily stop Movie Servo AF by tapping [ ] in the lower left of the screen. • Movie Servo AF will resume after pausing if you return to movie recording after operations such as pressing the < > or < > button or changing the AF area.
Caution Precautions when set to [Movie Servo AF: Enable] Shooting conditions that make focusing difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance to the camera. • When shooting with a higher aperture value. • Also see Shooting Conditions That Make Focusing Difficult. Since the lens is driven continuously and the battery power is consumed, the possible movie recording time ( ) will be shortened.
Selecting the AF Area AF Area Selecting the AF Area Subject Tracking Subject to Detect Eye Detection Switching Tracked Subjects Tracking with the < > Button Manually Setting AF Points or Zone AF Frames Registering AF Points (Home Position) Magnified View AF Shooting Tips Shooting Conditions That Make Focusing Difficult AF Range 419
AF Area This section describes AF area operation with [ : Subject tracking] set to [Off]. : Spot AF The camera focuses in a narrower area than 1-point AF. : 1-point AF The camera focuses using a single AF point [ 420 ].
: Expand AF area: Focuses using one AF point [ ] and the AF area outlined here in blue. Effective for moving subjects, which are difficult to track with 1-point AF. Focusing on your preferred subject is easier than with Flexible Zone AF. When Servo AF is used, first you will focus using an AF point [ ]. : Expand AF area: Around Focuses using one AF point [ ] and the surrounding AF area outlined here in blue, which makes it easier to focus on moving subjects than with Expand AF area: .
: Flexible Zone AF 1 (default) With Flexible Zone AF 1, you can freely set the size of the Zone AF frame [ ] ( ). Uses auto selection AF in Zone AF frames to cover a larger area than Expand AF area, which makes focusing easier than with 1-point AF/Expand AF area and effective for moving subjects. By default, a square Zone AF frame is set.
: Flexible Zone AF 3 With Flexible Zone AF 3, you can freely set the size of the Zone AF frame [ ] ( ). Uses auto selection AF in Zone AF frames to cover a larger area than Expand AF area, which makes focusing easier than with 1-point AF/Expand AF area and effective for moving subjects. By default, a horizontal rectangular Zone AF frame is set.
Selecting the AF Area You can select the AF area to suit the shooting conditions or subject. If you prefer to focus manually, see Manual Focus. 1. Select [ 2. Select the AF area. : AF area]. The screen above is displayed when [ : Orientation linked AF point] ( ) is set to [Separate AF pts: Area+pt]. Set separate AF areas after choosing vertical and horizontal orientations.
Note To set the AF area, you can also press the < > button and then the < > button. The following descriptions apply to the camera with AF operation set to [Servo AF] ( ). Once a subject is in focus with [One-Shot AF] ( ), the AF point turns green.
Subject Tracking Among the subjects detected, a tracking frame [ ] is displayed over the main subject. If the subject moves, the tracking frame [ ] also moves to track it. You can set [ : Eye detection] to [Enable] to shoot with the subject's eyes in focus ( 1. Select [ 2. Select an option. : Subject tracking]. Caution No tracking frame is displayed when [ : Subject tracking] is set to [Off], regardless of the [ : Subject to detect] setting. 426 ).
Manually selecting a subject for focus 1. Check the tracking frame. A tracking frame [ ] appears over detected subjects. Unless the tracking frame [ gray. ] overlaps an AF point, it is displayed in Once the tracked subject is behind or inside an AF point, the tracking frame turns white (distinguishing it as an active frame), enabling selection as the main subject.
2. Focus and shoot/record. Once you press the shutter button halfway and the subject is in focus, the AF point turns blue. An orange AF point indicates that the camera could not focus on subjects. Subjects are tracked across the entire screen as you press the shutter button halfway or completely.
Note Selecting a subject manually after pressing the < > button changes the tracking frame to [ ] and locks on to that subject for tracking across the entire screen regardless of the specified AF area. Selecting a subject by touch with [ : AF area] set to [Whole area AF] changes the tracking frame to [ ] and locks on to that subject for tracking across the entire screen. To release locked tracking, tap [ ] or press the < > button. After release, the AF point reverts to the position set before release.
Subject to Detect You can specify conditions for automatic selection of the main subject to track. People Prioritizes the faces or heads of people as the main subjects to track. When a person's face or head cannot be detected, the camera attempts to detect and track their torso. If their torso cannot be detected, the camera may track other parts of their body. Animals Detects animals (dogs, cats, or birds) and people and prioritizes detection results for animals as the main subjects to track.
Caution The camera may detect areas other than faces or bodies of people or animals or key details or bodies of vehicles as subjects. Faces that are very small or large in the picture, too bright or dark, or partly hidden cannot be detected. Animal face detection is not possible unless the subject is close enough and facing the camera steadily. A tracking frame is displayed for the entire body. Detection is not possible for birds camouflaged in a forest, or similar situations.
Eye Detection You can shoot with the eyes of people or animals in focus. 1. Select [ 2. Select an option. : Eye detection].
3. Aim the camera at the subject. A tracking frame is displayed around their eye. To choose an eye to focus on when [ : AF area] is set to [Whole area AF], press the < > button to change the tracking frame to [ ], then use < >. As you use < >, the tracking frame changes again to [ ]. You can also tap the screen to choose an eye, when [ set to [Whole area AF] or during tracking in progress. : AF area] is If your selected eye is not detected, an eye to focus on is selected automatically. 4.
Switching Tracked Subjects You can specify how easily the camera switches AF points to track subjects. Initial priority Tracks the subject initially determined for AF, to the extent possible. On subject Tracks the subject initially determined for AF, to the extent possible. Switches to other subjects if the camera can no longer determine if the tracked subject is the main subject. Switch subject Switches to track other subjects in response to shooting conditions.
Tracking with the < You can press the < 1. > Button > button to track subjects with a tracking frame [ ]. Check the AF point. The AF point (1) will appear. With Expand AF area: or Expand AF area: Around, adjacent AF points are also displayed. With Flexible Zone AF, the specified Zone AF frame is displayed.
2. Press the < > button. The AF point changes to a tracking frame [ ], which locks on to that subject for tracking and follows the subject within the screen if it moves. > button again. To cancel tracking, press the < The tracking frame changes to [ ] when multiple subjects can be detected, and you can use < > to choose a subject to focus on. Once tracking begins, the subject is tracked across the entire screen, regardless of the specified AF area.
Manually Setting AF Points or Zone AF Frames You can manually set the AF point or Zone AF frame. Here, Flexible Zone AF 1 screens are used as an example. 1. Check the AF point. The AF point (1) will appear. With Expand AF area: or Expand AF area: Around, adjacent AF points are also displayed. With Flexible Zone AF, the specified Zone AF frame is displayed.
2. Move the AF point. Press the < > button, use < > to move the AF point into position for focusing, then press < > (but note that with some lenses, it may not move to the edge of the screen). To center the AF point while using < >, press < > straight in. You can also focus by tapping a position on the screen. To center the AF point or Zone AF frame, tap [ straight in. ] or press < > You can resize Zone AF frames used for Flexible Zone AF by pressing > button.
3. Focus and take the picture. Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point turns blue. If focus is not achieved, the AF point will turn orange. Caution The camera will keep moving the AF point [ ] to track subjects when set to Flexible Zone AF and Servo AF, but under some shooting conditions (such as when subjects are small), it may not be possible to track the subject. Focusing may be difficult when using a peripheral AF point.
Registering AF Points (Home Position) You can register the position of a frequently used AF point. For instant switching from the current AF point to your registered AF point, you can use a button you assign to recalling the home position on advanced setting screens for [Direct AF point selection], [Metering and AF start], [Switch to registered AF point], or [Register/recall shooting func] in [ : Customize buttons] ( ). 1. Select your preferred AF area. Press the < > button to select an AF area.
Note To clear registered AF points, hold down the < > button and press the < > button, or press and hold the < > button. You can also clear registered AF points by clearing all camera settings. You can register separate home positions for each camera orientation when the orientation-linked AF point setting ( ) is set to [Separate AF pts: Area+pt] or [Separate AF pts: Pt only].
Magnified View To check the focus, you can magnify display by approx. 5× or 10× by pressing the < button (or tapping [ ]). > Magnification is centered on the AF point for [Spot AF], [1-point AF], [Expand AF area: ], and [Expand AF area: Around], or on the Zone AF frame for Flexible Zone AF. Autofocusing is performed in magnified view if you press the shutter button halfway. When set to Servo AF, pressing the shutter button halfway in magnified view reverts to the normal view for focusing.
AF Shooting Tips Even when focus is achieved, pressing the shutter button halfway will focus again. Image brightness may change before and after autofocusing. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. If the light source changes as you shoot, the screen may flicker, and focusing may be difficult. In this case, restart the camera and resume shooting with AF under the light source you will use.
Shooting Conditions That Make Focusing Difficult Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.). Fine lines and subject outlines. Under light sources with constantly changing brightness, colors, or patterns.
AF Range The available autofocus range varies depending on the lens, aspect ratio, and image quality used, and whether you are shooting 4K movies or using features such as Movie cropping or Movie digital IS.
Manual Focus Setting MF peaking (Outline Emphasis) Focus Guide If focusing is not possible with autofocus, you can magnify the image and focus manually. 1. Set the lens's focus mode switch to < >. Turn the lens focusing ring to set the approximate focus. For lenses without a focus mode switch, set [ ]. [ 2. : Focus mode] to Magnify the image. Each press of the < follows.
3. Move the magnified area. Use < > to move the magnified area into position for focusing. To center the magnified area, press < 4. > straight in. Focus manually. While looking at the magnified image, turn the lens focusing ring to focus. After achieving focus, press the < view. > button to return to the normal Note In magnified view, the exposure is locked. Even when focusing manually, you can use Touch Shutter to shoot.
Setting MF peaking (Outline Emphasis) Edges of subjects in focus can be displayed in color to make focusing easier. You can set the outline color and adjust the sensitivity (level) of edge detection. 1. Select [ 2. Select [Peaking]. : MF peaking settings]. Select [On]. 3. Set [Level] and [Color]. Set as necessary.
Caution In magnified view, peaking display is not shown. During HDMI output, peaking display is not shown on equipment connected via HDMI. Note that peaking display is shown on the camera screen when [ : HDMI ]. display] is set to [ + MF peaking may be hard to discern at high ISO speeds, especially when ISO expansion is set. If necessary, lower the ISO speed or set [Peaking] to [Off]. Note Peaking display shown on the screen is not recorded in images.
Focus Guide Setting [ : Focus guide] to [On] provides a guide frame that shows which direction to adjust focus and the extent of adjustment needed to focus on the person. You can also use eye control to display the focus guide at your preferred position. For details, see Using Eye Control for AF. 1. Select [ 2. Select [On]. : Focus guide]. The guide frame is displayed on the face of any person detected as the main subject.
The guide frame indicates the current position in focus and adjustment amount as follows.
Adjustment information not detected Caution Under difficult shooting conditions for AF ( ), the guide frame may not be displayed correctly. Higher aperture values are more likely to prevent correct guide frame display. No AF points are displayed while the guide frame is displayed. The guide frame is not displayed in these situations. • When the lens's focus mode switch is set to < > • When display is magnified The guide frame is not displayed correctly during shifting or tilting of TS-E lenses.
Servo AF Characteristics Case Details Case 1: Versatile Multi-Purpose Setting Case 2: Continue to Track Subjects, Ignoring Possible Obstacles Case 3: Instantly Focus on Subjects Suddenly Entering AF Points Case 4: For Subjects That Accelerate or Decelerate Quickly Case A: Tracking Automatically Adapts to Subject Movement Parameters Adjusting Case Parameters Shooting with Servo AF can be easily tailored to your subjects or shooting situations by selecting a Case option.
Case Details Case 1 to Case A are five combinations of settings for “Tracking sensitivity” and “Acceleration/deceleration tracking.” Referring to the following table, select the case for your subject and shooting situation.
Case 1: Versatile Multi-Purpose Setting Default • Tracking sensitivity: 0 • Accel./decel. tracking: 0 Standard setting suited to moving subjects in general. Suitable for many kinds of subjects and scenes. In the following situations, select [Case 2] to [Case 4] instead: non-subjects moving across AF points, elusive subjects, or subjects that suddenly appear or change speed.
Case 2: Continue to Track Subjects, Ignoring Possible Obstacles Default • Tracking sensitivity: Locked on: –1 • Accel./decel. tracking: 0 Setting to continue focusing on the subject even if non-subjects move across AF points, or if the subject strays from AF points. Effective if you prefer the focus not to switch to nonsubjects or the background.
Case 3: Instantly Focus on Subjects Suddenly Entering AF Points Default • Tracking sensitivity: Responsive: +1 • Accel./decel. tracking: +1 Setting to focus on a series of subjects at different distances in the AF points, one after another. Focus switches to any new subject that appears in front of the target subject. Also effective when you want to always focus on the closest subject.
Case 4: For Subjects That Accelerate or Decelerate Quickly Default • Tracking sensitivity: Responsive: 0 • Accel./decel. tracking: +1 Setting to keep tracking and focusing on subjects even if they suddenly change speed. Effective for subjects having sudden movements, sudden acceleration/deceleration, or sudden stops. Note Try setting [Accel./decel. tracking] to [+2] to keep up with subjects that change speed significantly from moment to moment ( ).
Case A: Tracking Automatically Adapts to Subject Movement Useful when you prefer to shoot with parameters set automatically, based on how subjects change. Tracking sensitivity and acceleration/deceleration tracking are set automatically.
Parameters Tracking sensitivity Setting for Servo AF subject-tracking sensitivity in response to non-subjects moving across AF points or subjects straying from AF points. 0 Standard setting. Suitable for moving subjects in general. Locked on: –2 / Locked on: –1 The camera will try to continue focusing on the subject even if non-subjects move across AF points or if the subject strays from the AF points. The –2 setting makes the camera keep tracking the target subject longer than the –1 setting.
Acceleration/deceleration tracking Setting for subject-tracking sensitivity in response to sudden, significant changes in speed, as when subjects suddenly start or stop moving. 0 Suited for subjects that move at a steady speed (minor changes in moving speed). –2 / –1 Suited for subjects that move at a steady speed (minor changes in moving speed). Effective when a setting of 0 makes focus unstable, due to slight subject movement or an obstruction in front of the subject.
Adjusting Case Parameters You can manually adjust the parameters ((1) Tracking sensitivity and (2) Acceleration/ deceleration tracking) for Case 1 to Case 4. 1. Select a case. Turn the < 2. Press the < > dial to select the number of a case to adjust. > button. The selected parameter is outlined in purple. 3. Select a parameter to adjust.
4. Make the adjustment. Default settings are indicated by a light gray [ ] icon. To confirm the adjustment, press < >. To return to the screen in step 1, press the < > button. Note To restore default parameter settings for (1) and (2) to each case, press the < > button in step 2, then press the < > button. You can also register (1) and (2) parameter settings to My Menu ( ). This enables you to adjust settings for the selected case.
Customizing AF Functions [ 3] [ 4] [ 6] [ 2] (In Movie Recording) You can configure AF functions in detail to suit your shooting style or subject. [ 3] One-Shot AF release priority You can specify whether to prioritize focus or release timing for One-Shot AF (except when shooting with Touch Shutter). [ ] Focus The picture will not be taken until focus is achieved. Useful when you want to achieve focus before capturing the image.
[ ] Release Prioritizes shutter release over focus. Useful when capturing the decisive moment is most important. Note that the camera shoots whether or not the subject is in focus. Preview AF This function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button halfway. 1. Select [ 2. Select [Enable]. : Preview AF]. Caution Fewer shots are available when set to [Enable], because the lens is driven continuously and battery power is consumed.
Lens operation when AF is not available You can specify lens operation that applies when autofocusing on a subject is not possible. [ ] Continue focus search If focus cannot be achieved with autofocus, the lens is driven to search for the precise focus. [ ] Stop focus search If autofocus starts and the focus is far off or if focus cannot be achieved, the lens drive will not be performed. This prevents the lens from becoming grossly out of focus due to the focus search drive.
2. Select an option. [ON] Enable Enables firing of the AF-assist beam, when needed. [OFF] Disable Disables firing of the AF-assist beam. Set if you prefer not to fire the AF-assist beam. [LED] LED AF assist beam only Enables LED AF-assist beam firing by Speedlites equipped with this feature, when these flash units are attached. If your Speedlite is not LED-equipped, the camera's AF-assist beam is fired instead.
[ 4] Limit AF areas You can limit the AF areas available to the areas that you normally use. Select available AF areas and press < > to add a checkmark [ ]. Select [OK] to register the setting. For details on AF areas, see AF Area. Caution The [ ] mark cannot be cleared from all items at the same time. Note An asterisk to the right of [ has been modified.
AF area selection control You can set how AF area selection methods are switched. [ ] →M-Fn button Press the < [ ] > button, then the < > button. Each press switches the AF area. →Main Dial Press the < > button, then turn the < > dial to switch the AF area. Note When [ →Main Dial] is set, use < > to move the AF point horizontally. Multi-controller sensitivity in AF point selection You can adjust Multi-controller sensitivity, which applies to AF point positioning.
Orientation-linked AF points You can set separate types of AF areas or positions of AF points for vertical and horizontal shooting. [ ] Same for both vert/horiz The same AF points or Zone AF frames in the same AF areas are used in both vertical and horizontal shooting.
[ 6] Electronic full-time MF Operation of manual focus adjustment using the electronic focusing ring when certain lenses are attached is customizable. Check the Canon website for compatible lenses. Disable Operation of manual focus adjustment corresponds to the [Lens electronic MF] setting. Enable Manual focus adjustment is available whenever the camera is on. Lens electronic MF For lenses equipped with electronic manual focusing, you can specify how manual focus adjustment is used with One-Shot AF.
[ ] One-Shot→enabled (magnify) You can manually adjust the focus after the AF operation if you keep holding down the shutter button halfway. You can magnify the area in focus and adjust the focus manually by turning the lens focusing ring. [ ] Disable in AF mode Manual focus adjustment is disabled when the lens's focus mode switch is set to < >.
Focusing ring rotation You can reverse the direction that the focusing ring of RF lens is rotated to adjust settings. [ ] Normal [ ] Reverse direction Focusing ring sensitivity of RF lenses You can set the sensitivity of the RF lens focusing ring. [ ] Varies with rotation speed Focusing ring sensitivity varies depending on rotation speed. [ ] Linked to rotation degree The focal position is adjusted based on the amount of rotation, regardless of the rotation speed.
Use as a focusing or control ring Menu-based switching of lens focus/control ring functionality. Caution Available when using lenses that have a combination focusing ring/control ring but have no switch to switch between these feature. Use as focus ring The ring works as a focusing ring. Use as control ring The ring works as a control ring. Note Switching is also possible from the Quick Control screen, when customized with [ : Customize Quick Controls] ( ).
[ 2] (In Movie Recording) Movie Servo AF speed This function is available when [ : Movie Servo AF] is set to [Enable]. You can set the AF speed and operating conditions for Movie Servo AF. The function is enabled when using a lens supporting slow focus transition during movie recording.
Note Operation when inactive is equivalent to when [AF speed] is set to [Standard (0)]. An asterisk “*” to the right of [ : Movie Servo AF speed] indicates that the default setting has been modified. Movie Servo AF tracking sensitivity You can adjust the tracking sensitivity (to one of seven levels), which affects responsiveness if the subject strays from the AF point during Movie Servo AF, as when interfering objects move across AF points or when you pan.
Selecting the Drive Mode Single and continuous drive modes are provided. You can select the drive mode suiting the scene or subject. 1. Press the < 2. Select the drive mode. Turn the < > button ( ). > dial to make a selection. [ ] Single shooting When you hold down the shutter button completely, only one shot will be taken.
[ ] High-speed continuous shooting When you hold down the shutter button completely, you can shoot continuously as described below while you keep holding it down, based on the [ : Shutter mode] setting. • [Electronic]: max. approx. 15 shots/sec. • [Elec. 1st-curtain]: max. approx. 8.0 shots/sec. • [Mechanical]: max. approx. 6.0 shots/sec. [ ] Low-speed continuous shooting When you hold down the shutter button completely, you can shoot continuously at max. approx. 3.0 shots/sec.
Using the Self-Timer Use the self-timer when you want to be in the picture such as a commemorative photograph. 1. Press the < 2. Select the self-timer. > button ( ). Turn the < > dial to make a selection. : Shoot in 10 sec. : Shoot in 2 sec.
3. Take the picture. Focus on the subject, then press the shutter button completely. To check operation, look at the self-timer lamp, listen for beeps, or watch the countdown in seconds on the screen. Self-timer lamp blinking accelerates and the camera beeps quickly approx. 2 sec. before the picture is taken. Note [ ] is used to start shooting without touching the camera (to avoid camera shake) when it is mounted on a tripod for shots such as still lifes or long exposures, for example.
Remote Control Shooting Wireless Remote Control BR-E1 Remote Switch RS-80N3 / Timer Remote Controller TC-80N3 For remote control shooting, you can use an optional Wireless Remote Control BR-E1 (Bluetooth) or an optional Remote Switch RS-80N3 or Timer Remote Controller TC-80N3 (both wired). Wireless Remote Control BR-E1 You can shoot remotely up to approx. 5 meters/16.4 feet from the camera. After pairing the camera and BR-E1 ( ), set the drive mode to [ ] or [ ] for still photo shooting ( ).
Remote Switch RS-80N3 / Timer Remote Controller TC-80N3 Once connected to the camera, the switch enables you to shoot remotely over a wired connection. For operating instructions, refer to the accessory instruction manual. 1. Open the terminal cover. 2. Connect the plug to the remote control terminal.
Playback This chapter covers topics related to playback—playing back captured still photos and movies—and introduces menu settings on the playback [ ] tab. Caution Normal display or selection on this camera may not be possible for images captured on other cameras, or images from this camera that have been edited or renamed on a computer. Images that cannot be used with playback functions may be displayed. Note You can set [ : Screen brightness] ( button.
• Browsing Images with the Rate+Quick Control Dial 1 • Switching the Main Dial and Quick Control Dial 2 • Rate/Voice Memo Button Function • Customizing Playback Information Display • Displaying the Highlight Alert • AF Point Display • Playback Grid • Movie Play Count • HDMI HDR Output 484
Tab Menus: Playback Playback 1 (1) Protect images (2) Erase images (3) Rotate stills (4) Change mov rotate info (5) Rating (6) Image copy (7) Print order Playback 2 (1) RAW image processing (2) Resize (3) Cropping (4) HEIF→JPEG conversion 485
Playback 3 (1) Slide show (2) Set image search conditions (3) Magnification Playback 4 (1) Image jump w/ (2) Image jump w/ (3) Switch (4) / + / button function (5) Memo audio quality 486
Playback 5 (1) Playback information display (2) Highlight alert (3) AF point disp.
Image Playback Single-Image Display Shooting Information Display Touch Playback Single-Image Display 1. Switch to playback. Press the < > button. The last image captured or played back is displayed. 2. Browse images. To play back images starting with your most recent shot, turn the < > dial counterclockwise. To play back images starting with the first captured image, turn the dial clockwise. Each time you press the < 488 > button, the display will change.
No information Basic information display Shooting information display 3. Exit image playback. Press the < standby. > button to exit image playback and return to shooting Note Lines indicating the image area are shown on RAW images captured with [ : Cropping/aspect ratio] set to [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)] ( ). If the search conditions are set with [ : Set image search conditions] ( ), only the filtered images will be displayed.
Shooting Information Display With the shooting information screen displayed ( ), you can press < > up or down to view other information. You can also customize the information displayed, in [ : Playback information display] ( ).
Touch Playback The camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like those used with smartphones and similar devices. First, press the < > button to prepare for touch playback.
Magnified view Note You can also magnify display by double-tapping with one finger.
Magnified Image Display Setting the Initial Magnification Ratio Setting the Initial Magnification Position Magnification for Subsequent Images You can magnify display of your captured images. 1. Magnify the image. Magnification is possible at these times: 1. During image playback (single-image display), 2. During image review after shooting, and 3. When the camera is ready to shoot. Press the < > button. The magnified view will appear.
2. Scroll the image. Use < > to scroll around the magnified image. With < >, you can also move the magnified area itself. Press the < > or < > button to exit magnified view. Note To switch to other images while maintaining magnified view, turn the < the times of 1. and 3. only). Magnification is not available for movies.
Setting the Initial Magnification Ratio You can set the initial magnification ratio. 1. Select [ 2. Select [Magnificatn (apx)]. : Magnification].
3. Select an option. 2x, 4x, 8x, 10x Magnified view starts at the selected magnification ratio. Actual size The recorded image's pixels will be displayed at approx. 100%. Same as last Magnified view resumes from the same ratio as the last time you exited > or < > button.
Setting the Initial Magnification Position You can set the initial magnification position. 1. Select [ 2. Select [Magnified position]. : Magnification].
3. Select an option. From center Magnified view starts from the center of the screen. From focus pt Magnified view starts from the AF point in focus. If the photo is taken with manual focus, the magnified view starts from the center of the screen.
Magnification for Subsequent Images You can specify whether to maintain the same position for magnified view or use to the position set in [Magnified position] when displaying subsequent images. 1. Select [ 2. Select [Maintain position]. : Magnification].
3. Select an option. Enable The current magnified position is maintained when displaying subsequent images in magnified view. Disable The position set in [Magnified position] is used when displaying subsequent images in magnified view.
Index Display (Multiple-Image Display) 1. Press the < > button. During image playback, press the < [ 2. > button. ] will be displayed in the lower right of the screen. Switch to the index display. Turn the < > dial counterclockwise. The 4-image index display will appear. The selected image is highlighted with an orange frame. Turning the < > dial further counterclockwise will switch the display from 9 to 36 to 100 images.
3. Browse images. Use < > or the < selection. > dial to move the orange frame for image Press < > in the index display to display the selected image in the single-image display.
Voice Memo Recording and Playback Recording Voice Memos Memo Audio Quality Playing Voice Memos You can add (record) voice memos to your shots. Voice memos are recorded as WAV audio files with the same file number as the image. They can be played back by the camera or a computer. Recording Voice Memos 1. Switch to playback. 2. Select an image to add a voice memo to. Turn the < > dial to select an image to add a voice memo to.
3. Record a voice memo. Hold down the < / > button for approx. 2 sec. Keep holding down the button after [Recording memo...] appears, and speak into the microphone (1). Each recording can be up to approx. 30 sec. To end the voice memo, release the button. A[ ] icon is displayed at the top of the screen.
Caution Voice memos cannot be added to movies or protected images. Voice memos cannot be recorded with an external microphone. Voice memos cannot be added to images during transfer to an FTP server. Note Audio quality of voice memo recording can be changed in [ : Memo audio quality]. To record voice memos longer than 30 sec., repeat step 3. You can record a single voice memo during image review (immediately after shooting) by following step 3.
Memo Audio Quality You can set the audio quality for recording voice memos. 1. Select [ 2. Select an option. : Memo audio quality]. 48 kHz: High quality (48 kHz) Enables voice memo recording at the same level of audio quality as movies. 8 kHz: Low quality (8 kHz) Enables smaller voice memo file sizes than with [High quality (48 kHz)].
Playing Voice Memos 1. Select [ : 2. Select [ / ]. 3. Select an image for voice memo playback. Press the < / button function]. > button to switch to image playback. Turn the < > dial to select an image labeled with a [ top of the screen.
4. Play back the voice memo. Press the < the speaker (1). / > button to play back the voice memo through You can adjust the sound volume by turning the < Press the < / > dial. > button to stop playback. Note Multiple voice memos added to an image are played back consecutively. Added voice memos cannot be erased by themselves using the camera. Erasing images ( ) also erases any voice memos added to the images.
Movie Playback 1. Switch to playback. Press the < 2. > button. Select a movie. Turn the < > dial to select a movie to play. In single-image display, the [ the screen indicates a movie. ] icon displayed in the upper left of In index display, perforations at the left edge of a thumbnail indicate a movie. Movies cannot be played back from index display, so press < > to switch to single-image display.
3. In the single-image display, press < 4. Press < >. > to play back the movie. The movie will start playing back. Sound is played through the speaker (1). You can pause playback and display the movie playback panel by pressing < >. Press it again to resume the playback. Turn the < > dial to adjust the volume (even during playback).
Movie playback panel Item Playback Slow motion Skip backward Previous frame Next frame Skip forward Playback Operations Pressing < > toggles between playback and stop. Adjust the slow motion speed by turning the < > dial. The slow motion speed is indicated in the upper right of the screen. Skips backward approx. 1 sec. each time you press < < Displays the previous frame each time you press < < >. Holding > down will fast forward the movie. Skips forward approx. 1 sec. each time you press < < >.
Editing a Movie's First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. 1. In single-image display, press < 2. On the movie playback panel, select [ 513 >. ].
3. Specify the part to be edited out. Select either [ ] (Cut beginning) or [ ] (Cut end). Press < > left or right to go back or forward one frame. Keep pressing the Multi-controller to fast rewind or fast forward frames. Each > dial goes back or forward one frame. turn of the < After deciding which part to edit out, press < >. The portion indicated by a line at the bottom of the screen will remain. 4. Check the edited movie. Select [ ] to play back the edited movie.
5. Save. Select [ ] (1). The save screen will appear. To save it as a new file, select [New file], or to save it and overwrite the original movie file, select [Overwrite]. ] (2) to save a compressed version of the file. 4K movies are Select [ converted to Full HD movies before compression. On the confirmation screen, select [OK] to save the edited movie and return to the movie playback screen. Caution Because editing is performed in approx. 1 sec.
4K Movie Frame Grab From 4K movies, you can select individual frames to save as JPEG or HEIF still images. This function is called “Frame Grab.” 1. Select a 4K movie. Turn the < > dial to select a 4K quality movie. On the shooting information screen ( ] and [ ] icons. [ In index display, press < 2. ), 4K movies are labeled with > to switch to single-image display. In the single-image display, press < >. The movie playback panel will appear. 3. Select a frame to grab.
4. Select [ 5. Save. ]. Select [OK] to save the current frame as a JPEG still image. Frame grabs from HDR movie files are saved as HEIF images. Check the destination folder and image file number. 6. Select the image to display. Select [View original movie] or [View extracted still image]. Caution Frame grabbing is not possible from the following 4K movies.
Playback on a TV Set By connecting the camera to a television with a commercially available HDMI cable, you can play back the captured still photos and movies on the television. If the image does not appear on the TV screen, confirm that [ : Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television). 1. Connect the HDMI cable to the camera. Use the cable protector ( ) and insert the HDMI cable in the camera's < > terminal. 2.
5. Press the < > button. Images are now displayed on the television, with nothing displayed on the camera screen. The images will automatically be displayed at the optimum resolution matching the connected television. Caution Adjust movie sound volume with the television. The sound volume cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television.
Protecting Images Protecting Individual Images via the Menu Specifying the Range of Images to Protect Protecting All Images in a Folder or on a Card You can protect important images from being accidentally erased. Caution If you format the card ( ), the protected images will also be erased. Note Once an image is protected, it cannot be erased by the camera's erase function. To erase a protected image, you must first cancel the protection.
2. Select [Select images]. 3. Select the image to protect. Turn the < 4. > dial to select an image to protect. Protect the image. Press < > to protect the selected image, after which it will be labeled with a [ ] icon (1) at the top of the screen. To cancel protection and clear the [ ] icon, press < > again. To protect another image, repeat steps 3 and 4. Note During playback, you can protect images by pressing the < 521 / > button ( ).
Specifying the Range of Images to Protect While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. 1. Select [Select range]. Select [Select range] in [ 2. : Protect images]. Specify the range of images. Select the first image (start point). Next, select the last image (end point). The images in the specified range will be protected and the [ ] icon will appear.
Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ images], all the images in the folder or on the card will be protected. : Protect To cancel protection, select [Unprotect all images in folder] or [Unprotect all images on card]. If the search conditions are set with [ : Set image search conditions] ( display will change to [All found images] and [Unprotect all found].
Erasing Images Erasing Images Individually Selecting ([ ]) Multiple Images to Erase Together Specifying the Range of Images to Erase Erasing All Images in a Folder or on a Card You can either select and erase unnecessary images individually or erase them in one batch. Protected images ( ) will not be erased. Caution Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them.
4. Erase the images. JPEG/HEIF/RAW images or movies Select [Erase]. RAW+JPEG/RAW+HEIF images Select an option. Series of images captured in [ ], [ ], or [ ] drive mode are erased when you select [Erase scene including image] during playback. Note During playback, you can erase images by pressing the < 525 / > button ( ).
Selecting ([ ]) Multiple Images to Erase Together By adding checkmarks to the images to be erased, you can erase all those images at once. 1. Select [ 2. Select [Select and erase images]. 3. Select an image. : Erase images]. Turn the < > dial to select an image to erase, then press < To select another image to be erased, repeat step 3. 526 >.
4. Erase the images. Press the < > button, then press [OK].
Specifying the Range of Images to Erase While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. 1. Select [Select range]. Select [Select range] in [ 2. : Erase images]. Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images.
4. Erase the images. Select [OK].
Erasing All Images in a Folder or on a Card You can erase all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ all the images in the folder or on the card will be erased. : Erase images], If the search conditions are set with [ : Set image search conditions] ( display will change to [All found images]. ), the • If you select [All found images], all the images filtered by the search conditions will be erased.
Rotating Still Photos You can use this feature to rotate the displayed image to the desired orientation. 1. Select [ 2. Select an image to rotate. : Rotate stills]. Turn the < 3. > dial to select the image. Rotate the image. Each time you press < 90°→270°→0°. >, the image will rotate clockwise as follows: To rotate another image, repeat steps 2 and 3.
Note If you set [ : Auto rotate] to [On ] ( ) before taking pictures, you need not rotate the image with this function. If the rotated image is not displayed in the rotated orientation during image ]. playback, set [ : Auto rotate] to [On Movies cannot be rotated.
Changing Movie Orientation Information You can manually edit movie playback orientation information (which determines which side is up). 1. Select [ 2. Select a movie. : Change mov rotate info]. Turn the < change.
3. Change the orientation information. As you watch the camera and icon in the upper left of the screen, press < > to specify which side is up. Each press of < > edits the movie rotation information as follows: [ ] → [ ] → [ ]. Caution Movies are played horizontally on the camera and via HDMI video output, regardless of the [ : Add rotate info] setting ( ). Movie orientation information of movies recorded with other cameras cannot be edited with this camera.
Rating Images Rating Individual Images With the < / > Button Rating Individual Images via the Menu Rating by Specifying the Range Rating All Images in a Folder or on a Card You can rate images on a scale of 1–5 ( rating. / / / / ). This function is called * Rating images can help you organize them. Rating Individual Images With the < 1. > Button Select the image to be rated. Press the < Turn the < 2. / > button to switch to image playback. > dial to select the image to be rated.
Note During playback, you can rate images by pressing the < 536 / > button ( ).
Rating Individual Images via the Menu 1. Select [ 2. Select [Select images]. 3. Select the image to be rated. : Rating]. Turn the < > dial to select the image to be rated.
4. Rate the image. Press < >, and a blue highlight frame will appear as shown in the screen shown above. Turn the < > dial to select a rating mark, then press < >. When you append a rating mark to the image, the number beside the set rating will increase by one. To rate another image, repeat steps 3 and 4.
Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. 1. Select [Select range]. Select [Select range] in [ 2. : Rating]. Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images. To select other images, repeat step 2. 3.
4. Rate the images. Turn the < > dial to select a rating mark, then select [OK]. All the images in the specified range will be rated (same rating) at once.
Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [ : Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated. Turn the < > dial to select a rating, then select [OK]. When you are not rating images or canceling the rating, select [ ]. If the search conditions are set with [ : Set image search conditions] ( display will change to [All found images].
Note Values next to ratings are displayed as [###] if more than 1,000 images have that rating. With [ : Set image search conditions] and [ : Image jump w/ ], you can display only the images given a specific rating.
Copying Images Copying Individual Images Copying a Range of Images Copying All Images in a Folder or on a Card You can copy the images on one card to the other card to save duplicates. All images in a folder or on a card can also be copied at the same time. Caution For extensive copying, consider using a household power outlet accessory (sold separately).
Copying Individual Images 1. Select [ 2. Select [Sel.Image]. : Image copy]. Check the source and target card numbers and the free space on the target card. Select [Sel.Image], then press < 544 >.
3. Select the folder. (1) Number of images in folder (2) Lowest file number (3) Folder name (4) Highest file number Select the source folder, then press < >. When selecting the folder, refer to the images displayed at right of the screen. 4. Select an image to copy. (1) Total images selected Turn the < > dial to select an image to copy, then press < To select another image to copy, repeat step 4. 545 >.
5. Press the < 6. Select [OK]. > button. Check the target card, then select [OK]. 7. Select the target folder. Select the folder to copy the image to, then press < To create a new folder, select [Create folder]. 546 >.
8. Select [OK]. Check the information about the source and target card, then select [OK]. Results are displayed after copying is finished. Select [OK] to return to the screen in step 2.
Copying a Range of Images You can copy all specified images at once by selecting the first and last images in a range as you look at images in the index display. 1. Select [Range]. 2. Select the folder. Select the source folder, then press < >. When selecting the folder, refer to the images displayed at right of the screen.
3. Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images. To select another image to copy, repeat step 3. 4. Press the < > button. Images in the specified range are now copied.
Copying All Images in a Folder or on a Card You can copy all the images in a folder or on a card at once. Selecting [Sel. ] or [All images] in [ : Image copy] copies all the images it contains.
Print Ordering (DPOF) Print Options Selecting Images for Printing DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc. The print settings will be applied to all the images specified for printing.
3. Set the options as desired. Set [Print type], [Date], and [File No.] options. Print type Date File No. 4. On Off On Off Standard Prints one image on one sheet. Index Multiple thumbnail images are printed on one sheet. Both Prints both the standard and index prints. [On] imprints the recorded date of the captured image. [On] imprints the file number. Exit the setting. Press the < > button. Next, select [Sel.Image] or [Multiple] to specify the images to be printed.
Caution If you print an image with a large image size using the [Index] or [Both] setting ( ), the index print may not be printed with certain printers. In this case, resize the image ( ), then print the index print. Even if [Date] and [File No.] are set to [On], the date or file number may not be imprinted, depending on the print type setting and printer. With [Index] prints, the [Date] and [File No.] cannot both be set to [On] at the same time.
Selecting Images for Printing Selecting images Select and specify the images individually. Press the < > button to save the print order to the card. Standard/Both (1) Quantity (2) Total images selected > to print a copy of the displayed image. By turning the < Press < set a print quantity of up to 99 copies. > dial, you can Index (3) Checkmark (4) Index icon Press < print. > to add a checkmark [ ] to the box.
Selecting multiple images Select range Select [Select range] in [Multiple]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be specified for printing. All images in a folder Select [Mark all in folder] and select the folder. A print order for one copy of all the images in the folder will be specified.
RAW Image Processing Magnified View Processing Images with Specified Aspect Ratios RAW Image Processing Options You can process or images with the camera to create JPEG or HEIF images. RAW images are not affected, so different conditions can be applied to create JPEG or HEIF images. You can also use Digital Photo Professional (EOS software) to process RAW images. Caution Processing into HEIF is not available for expanded ISO speed (L or H). 1. Select [ or : RAW image processing].
2. Select an option, then select images. You can select multiple images to process at once. Select images Turn the < Press the < > dial to select images to process, then press < >. > button. Select range Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images. To process other images, repeat this step. Press the < > button.
3. Set the desired processing conditions. Use shot settings Images are processed using image settings at the time of capture. Images captured with [ : HDR shooting ] set to [Enable] are processed to create HEIFs, and images captured with this function set to [Disable] are processed to create JPEGs. Set up processing→JPEG/Set up processing→HEIF Use < > to select an item. Turn the < Press < > or < > dial to switch the setting. > to access the function setting screen.
4. Save. When using [Set up processing→JPEG] or [Set up processing→ HEIF], select [ ] (Save). Read the message and select [OK]. To process other images, select [Yes] and repeat steps 2–4. 5. Select the image to display. Select [Original image] or [Processed img.]. Your selected image is displayed.
Magnified View You can magnify images displayed for [Set up processing→JPEG] or [Set up processing →HEIF] by pressing the < > button. The magnification ratio varies depending on the [Image quality] setting. With < >, you can scroll around the magnified image. To cancel the magnified view, press the < > button again. Caution Results of processing with [Digital Lens Optimizer] set to [High] are only applied in magnified view. Results are not applied in normal display.
Processing Images with Specified Aspect Ratios JPEG or HEIF images at the specified aspect ratio are created when you process RAW images shot with [ : Cropping/aspect ratio] ( ) set to [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)].
RAW Image Processing Options : Brightness adjustment You can adjust the image brightness up to ±1 stop in 1/3-stop increments. : White balance ( ) ] enables you to select [Auto: You can select the white balance. Selecting [ Ambience priority] or [Auto: White priority]. If you select [ ], you can set the color temperature. : Picture Style ( ) You can select the Picture Style. You can adjust the sharpness, contrast, and other parameters.
: Image quality ( ) You can set the image quality when creating a JPEG or HEIF image. : Color space ( ) You can select either sRGB or Adobe RGB. Since the camera screen is not compatible with Adobe RGB, the difference in the image will hardly be perceptible when either color space is set. *[ selection.
• : Diffraction correction ( ) The diffraction by the lens aperture degrading the image sharpness can be corrected. If [Enable] is set, the corrected image will be displayed. If the effect is difficult to discern, magnify the image ( ). Caution Processing RAW images in the camera will not produce exactly the same results as processing RAW images with Digital Photo Professional (EOS software). If you perform [Brightness adjustment], noise, banding, etc. may be intensified with the effects of adjustment.
Resizing JPEG/HEIF Images You can resize a JPEG or HEIF image to reduce the pixel count and save it as a new image. Resizing is available for , , or JPEGs or HEIFs (sizes except ), including those captured in RAW+JPEG and RAW+HEIF shooting. images and RAW images or movies cannot be resized. 1. Select [ 2. Select an image. : Resize]. Turn the < > dial to select the image to resize.
3. Select the desired image size. Press < > to display the image sizes. Select the desired image size (1). 4. Save. Select [OK] to save the resized image. Check the destination folder and image file number, then select [OK]. To resize another image, repeat steps 2 to 4.
Cropping JPEG/HEIF Images You can crop a captured JPEG/HEIF image and save it as a new image. Cropping is available for JPEG or HEIF images. RAW images and frame-grab images from 4K movies cannot be cropped. 1. Select [ 2. Select an image. : Cropping]. Turn the < Press < > dial to select the image to crop. > to display the cropping frame.
3. Set the cropping frame. The image area within the cropping frame will be cropped. Resizing the cropping frame size > dial to resize the cropping frame size. The smaller the Turn the < cropping frame, the more magnified the cropped image will look. Changing the cropping frame aspect ratio and orientation Turn the < orientation. > dial to change the cropping frame aspect ratio and Moving the cropping frame Use < > to move the cropping frame vertically or horizontally.
5. Save. Press < > and select [OK] to save the cropped image. Check the destination folder and image file number, then select [OK]. To crop another image, repeat steps 2 to 5. Caution The position and size of the cropping frame may change depending on the angle set for tilt correction. Once a cropped image is saved, it cannot be cropped again or resized. AF point display information ( ) and Dust Delete Data ( ) will not be appended to the cropped images.
Converting HEIF to JPEG You can convert HEIF images captured in HDR shooting and save them as JPEG images. 1. Select [ 2. Select an image. : HEIF→JPEG conversion]. Turn the < Press < > dial to select an HEIF image to convert to JPEG. > to convert to JPEG.
3. Save. Select [OK] to save the JPEG image. • Check the destination folder and image file number, then select [OK]. • To convert another image, repeat steps 2 and 3. Note Some scenes may look different after conversion if the original and converted images are compared. Conversion is not available for cropped images, or for frame-grab images from 4K movies.
Slide Show You can play back the images on the card as an automatic slide show. 1. Specify the images to be played back. To play back all the images on the card, go to step 2. If you want to specify the images to be played back in the slide show, filter the images with [ : Set image search conditions] ( ). 2. Select [ : Slide show].
3. Set the playback as desired. Select [Set up]. Set the [Display time] and [Repeat] (repeated playback) settings for the still photos. After completing the settings, press the < Display time Repeat 573 > button.
4. Start the slide show. Select [Start]. After [Loading image...] is displayed, the slide show will start. 5. Exit the slide show. To exit the slide show and return to the setting screen, press the < > button. Note To pause the slide show, press < >. During pause, [ ] will be displayed in the upper left of the screen. Press < > again to resume the slide show. During the automatic playback of still photos, you can press the < > button to switch the display format ( ).
Setting Image Search Conditions Clearing the Search Conditions You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, play a slide show, erase, and apply other operations to filtered images. 1. Select [ : Set image search conditions].
2. Set the search conditions. Turn the < > dial to select an option. Turn the < > dial to set the option. A checkmark [ ] (1) is appended to the left of the option. (Specified as the search condition.) If you select the option and press the < > button, the checkmark [ ] will be removed (which cancels the search condition). Option Description Rating Displays images with the selected (rating) condition. Date Displays images taken on the selected shooting date.
4. Display the found images. Press the < > button. Only the images that match the set conditions (filtered) will be played back. When the images are filtered for display, the screen will have an outer yellow frame (2). Caution If no images match the search conditions, < > cannot be pressed in step 3. Note Search conditions may be cleared after operations involving camera power or card changes and editing, adding, or erasing images.
Browsing Images with the Main Dial In single-image display, you can turn the < backward according to the jump method set. 1. Select [ 2. Select the jump method. > dial to jump through the images forward or : Image jump w/ ]. Note With [Jump images by the specified number], you can turn the < > dial to select the number of images to jump by. When you select [Display by image rating], turn the < > dial to specify the rating ( ). Selecting will show all rated images as you browse.
3. Browse by jumping. (1) Jump method (2) Playback position Press the < > button. In single-image display, turn the < > dial. You can browse by the jump method set.
Browsing Images with the Rate+Quick Control Dial 1 In single-image display, you can turn the < > dial while holding down the < / > button to jump through the images forward or backward according to the jump method set. 1. Select [ 2. Select the jump method. : Image jump w/ + ]. Note You can configure this feature when [ function] is set to [ / ] or [ / ] ( : ). / button With [Jump images by the specified number], you can turn the < > dial to select the number of images to jump by.
3. Browse by jumping. (1) Jump method (2) Playback position Press the < > button. In single-image display, turn the < > dial while holding down the / > button. < You can browse by the jump method set.
Switching the Main Dial and Quick Control Dial 2 You can switch the functions assigned to these dials, as used on the image playback screen. 1. Select [ 2. Select an option. : Switch / ]. Disable Image jump Magnify/Index view Enable Magnify/Index view Image jump Note Corresponding icons in menus and on screens such as the Quick Control and Magnify/Reduce screen are changed accordingly.
Rate/Voice Memo Button Function You can assign image rating/protection/erasure, voice memo recording/playback, or image browsing in conjunction with the < > dial to the < / > button. 1. Select [ 2. Select an option. : / button function]. / : Rating / Hold to record voice memo Assigns rating to the < / > button. You can specify ratings available with the < / > button by pressing the < > button. During image playback, you can rate images or clear ratings by pressing the < / > button.
: Record voice memo / Rating disabled Assigns voice memo recording to the < / > button. During image playback, you can start recording a voice memo by pressing the < / > button. / : Play voice memo / Hold to record voice memo Assigns voice memo playback to the < / > button. During image playback, you can play a voice memo by pressing the / > button. You can also hold it down for 2 sec. to start < recording a voice memo. / : Protect / Hold to record voice memo Assigns protection to the < / > button.
Customizing Playback Information Display Histogram You can specify screens and accompanying information displayed during image playback. 1. Select [ 2. Add a checkmark [ : Playback information display]. ] next to the number of screens to display. Select numbers with the < > dial. Press < > to clear a checkmark [ checkmark [ ]. ]. Press it again to add a Repeat these steps to add a checkmark [ screen to display, then select [OK].
Histogram The histograms show signal levels across the tonal range. Brightness display (for checking the general exposure level and overall gradation) and RGB display (for checking saturation and gradation of red, green, and blue) are available. You can switch the histogram displayed by pressing the < > button when [ ] is displayed in the lower left of the [ : Playback information display] screen.
[Brightness] display This histogram is a graph showing the distribution of the image's brightness level, with the horizontal axis indicating the brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each brightness level. The more pixels there are toward the left, the darker the image, and the more pixels there are toward the right, the brighter the image.
[RGB] display This histogram is a graph showing the distribution of each primary color's brightness level in the image (RGB or red, green, and blue), with the horizontal axis indicating the color's brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each color brightness level. The more pixels there are toward the left, the darker and less prominent the color, and the more pixels there are toward the right, the brighter and denser the color.
Displaying the Highlight Alert You can specify blinking display of overexposed highlights on the playback screen. To obtain more detailed gradation in the blinking areas where you want the gradation to be faithfully reproduced, set the exposure compensation to a negative amount and shoot again for a better result. 1. Select [ 2. Select [Enable]. : Highlight alert].
AF Point Display You can display the AF points that were used to focus, which will be outlined in red on the playback screen. 1. Select [ 2. Select [Enable]. : AF point disp.].
Playback Grid You can display a grid over still photos shown in single-image display on the playback screen. This function is convenient for checking the image's vertical or horizontal tilt as well as composition. 1. Select [ 2. Select an option. : Playback grid].
Movie Play Count You can select how time is displayed on the movie playback screen. 1. Select [ : Movie play count].
2. Select an option. Rec time Displays the recording or playback time during movie playback. Time code Displays the time code during movie playback. Note Time codes are always recorded to movie files (except when High Frame Rate movies are set to [Free run]), regardless of the [Movie rec count] setting. The [Movie play count] setting in [ : Time code] is linked to the [ : Movie play count], so that these settings always match. The “frame” count is not displayed during movie recording or playback.
HDMI HDR Output You can view RAW or HEIF images in HDR by connecting the camera to an HDR TV. 1. Select [ 2. Select [On]. : HDMI HDR output]. Note Make sure the HDR TV is set up for HDR input. For details on how to switch inputs on the TV, refer to the TV manual. Depending on the TV used, images may not look as expected. On HDR TVs, some information may not be displayed. Quick Control RAW processing of displayed images is recommended if you will process RAW images while viewing HDMI HDR output.
Communication Functions This chapter describes how communication functions are used to connect the camera to a smartphone or computer over Wi-Fi or a wired LAN and send images, control the camera remotely, or perform other operations. Caution Important Note that Canon cannot be held liable for any loss or damage caused by erroneous network settings when using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.
Tab Menus: Communication Functions Tab (1) Network settings (2) Airplane mode (3) Bluetooth settings • Smartphone • Remote (4) Nickname (5) GPS settings (6) Image transfer (7) Reset communication settings Caution Wi-Fi connections are not possible while the camera is connected to a computer or other device via an interface cable. Other devices, such as computers, cannot be used with the camera by connecting them with an interface cable while the camera is connected to devices via Wi-Fi.
Available Communication Functions Smartphone ( ) Using the dedicated Camera Connect app on smartphones or tablets (hereafter, collectively referred to as “smartphones”), you can browse images on the camera, shoot remotely, and perform other operations. After pairing the camera with a smartphone supporting Bluetooth low energy technology (hereafter, “Bluetooth”), you only need to use the smartphone to connect via Wi-Fi.
Available communication functions and connection methods (besides GPS) Connection Method Available Features Wired LAN Camera Connect communication from smartphones Wi-Fi (Built-In) ○ Using EOS Utility ○ ○ Image transfer to FTP servers ○ ○ Using Browser Remote ○ Syncing time between cameras ○ 598
Camera Connect Communication from Smartphones Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Camera Connect Functions Canceling the Pairing Wi-Fi Connection Without Using Bluetooth Automatic Image Transfer as You Shoot Sending Images to a Smartphone from the Camera Settings to Make Images Viewable from Smartphones General Precautions on Camera Connect Communication from Smartphones By using the dedicated Camera Connect app installed on a smartphone or tablet (collectively referred to hereafter as
Note You can also access Google Play or App Store from QR codes displayed when you pair the smartphone and camera. For the operating system versions supported by Camera Connect, refer to the download site of Camera Connect. Sample screens and other details in this guide may not match the actual user interface elements after camera firmware updates or updates to Camera Connect, Android, or iOS.
2. Select [ 3. In [Network], select [Enable]. 4. Press the < : Network settings]. > button and select [ 601 : Bluetooth settings].
5. In [Bluetooth], select [Smartphone]. 6. Select [Pairing]. 7. Select an option. If Camera Connect is already installed, select [Do not display]. If Camera Connect is not installed, select [Android] or [iOS], scan the displayed QR code with the smartphone to access Google Play or App Store and install Camera Connect.
Steps on the smartphone (2) 8. Start Camera Connect. 9. Tap the camera for pairing. If you are using an Android smartphone, go to step 11. 10. Tap [Pair] (iOS only).
Steps on the camera (2) 11. Select [OK]. 12. Press the < > button. Pairing is now complete, and the camera is connected to the smartphone via Bluetooth. A Bluetooth icon appears on the main Camera Connect screen. Caution Bluetooth connection consumes battery power even after the camera's auto power off is activated. Therefore, the battery level may be low when you use the camera. The camera can be paired with one smartphone.
Note When paired via Bluetooth, tap [Bluetooth remote controller] in Camera Connect to control the camera remotely from the smartphone. From an Android device, you can control the camera to send images to the smartphone ( ).
Steps on the smartphone (3) 13. Tap a Camera Connect function. In iOS, tap [Join] when a message is displayed to confirm camera connection. After the devices are connected via Wi-Fi, a screen for the selected function is displayed on the smartphone. The Bluetooth and Wi-Fi icons are now displayed on the main Camera Connect screen, after you return to that screen. The camera's < > lamp is lit in green. Terminating Wi-Fi connections Disconnect by tapping [ ] on the Camera Connect screen.
Camera Connect Functions Images on camera Images can be browsed, deleted, or rated. Images can be saved on a smartphone. Remote live view shooting Enables remote shooting as you view a live image on the smartphone. Auto transfer Enables camera and app setting adjustment for automatic transfer of your shots ( ). Bluetooth remote controller Enables remote control of the camera from a smartphone paired via Bluetooth. (Not available when connected via Wi-Fi.
Canceling the Pairing Cancel pairing with a smartphone as follows. 1. Select [Check/clear connection info]. 2. Press the < 3. Select [OK]. 4. Clear the camera information on the smartphone. > button. In the smartphone's Bluetooth setting menu, clear the camera information registered on the smartphone.
Note To check the camera's Bluetooth address, select [Bluetooth address].
Wi-Fi Connection Without Using Bluetooth These instructions describe how to establish a direct Wi-Fi connection with a smartphone and use Camera Connect to control the camera. Steps on the camera (1) 1. On the camera, press the < 2. Select [ 3. In [Network], select [Enable]. 4. Select [Connection settings]. : Network settings]. 610 > button.
5. Select [SET* Unspecified]. 6. Select [Create with wizard]. 7. Select [Configure online]. Select [OK].
8. Select [Smartphone]. Select [OK]. 9. Press the < > button. Select [OK]. 10. Select [New settings]. Select [OK].
11. Select [Camera access point mode]. 12. Select [Easy connection]. Select [OK]. 13. Select [OK].
14. Press the < 15. Select [New settings]. > button. Select [OK]. 16. Check the SSID (network name) and password. Check the SSID (1) and password (2) displayed on the camera screen.
Steps on the smartphone 17. Operate the smartphone to establish a Wi-Fi connection. Activate the smartphone's Wi-Fi function, then tap the SSID (network name) you checked in step 16. In the password field, enter the password you checked in step 16, then tap [Join]. 18. Start Camera Connect and tap the camera to connect to via Wi-Fi.
Steps on the camera (2) 19. Select [OK]. To specify viewable images, press the < > button. For details on conditions that enable image viewing, see Settings to Make Images Viewable from Smartphones. 20. Press < >.
21. Press < >. The main window of Camera Connect will be displayed on the smartphone. The camera's < > lamp is lit in green. The Wi-Fi connection to a smartphone is now complete. Operate the camera using Camera Connect ( ). When connected via Wi-Fi, you can send images to a smartphone from the Quick Control screen during playback ( ).
Automatic Image Transfer as You Shoot Your shots can be automatically sent to a smartphone. Before following these steps, make sure the camera and smartphone are connected via Wi-Fi. 1. Select [ 2. Select [Connection option settings]. 3. Select [Smartphone settings]. : Network settings].
4. Select [Send to smartphone after shot]. 5. Set [Auto send] to [Enable]. If necessary, specify [Size to send].
Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone paired via Bluetooth (Android devices only) or connected via Wi-Fi. If you will send many images, consider using a household power outlet accessory (sold separately). 1. Switch to playback. 2. Press the < 3. Select [Send images to smartphone]. > button. If you perform this step while connected via Bluetooth, a message is displayed, and the connection switches to a Wi-Fi connection.
4. Select sending options and send the images. Sending images individually 1. Select an image to send. Turn the < > dial to select images to send, then press < You can press the < > button and turn the < > dial counterclockwise to select the image using the index display. 2. Select [Send img shown]. In [Size to send], you can select the image sending size. 621 >.
Sending multiple selected images 1. Press < 2. Select [Send selected]. >.
3. Select images to send. Turn the < > dial to select images to send, then press < >. To switch to three-image display for image selection, press the < > > dial counterclockwise. To return to the button and turn the < single-image display, press the < > button. After selecting the images to send, press the < 623 > button.
4. Select [Size to send]. On the displayed screen, select an image size. 5. Select [Send].
Sending a specified range of images 1. Press < 2. Select [Send range]. 3. Specify the range of images. >. Select the first image (start point). Select the last image (end point). To cancel the selection, repeat this step. To change the number of images in index display, press the < button, then turn the < > dial.
4. Confirm the range. Press the < 5. > button. Select [Size to send]. On the displayed screen, select an image size. 6. Select [Send].
Sending all images on the card 1. Press < 2. Select [Send all card]. 3. Select [Size to send]. >. On the displayed screen, select an image size.
4. Select [Send]. Sending images that match the search conditions : Set image search Send all the images that match the search conditions set in [ conditions] at once. For details on [Set image search conditions], see Setting Image Search Conditions. 1. Press < 2. Select [Send all found]. >.
3. Select [Size to send]. On the displayed screen, select an image size. 4. Select [Send]. Ending image transfer ( ) Caution During the image transfer operation, a picture cannot be taken even if the camera's shutter button is pressed.
Note You can cancel the image transfer by selecting [Cancel] during the transfer. You can select up to 999 files at a time. With a Wi-Fi connection established, disabling the smartphone's power saving function is recommended. Selecting the reduced size for still photos applies to all still photos sent at that time. Note that size still photos are not reduced. Selecting compression for movies applies to all movies sent at that time. Note that and movies are not reduced.
Settings to Make Images Viewable from Smartphones Images can be specified after the Wi-Fi connection is terminated. 1. Select [ 2. Select [Manual setting]. 3. Select [Function settings]. : Network settings].
4. Select [Smartphone]. 5. Select [Change]. 6. Select [Viewable imgs].
7. Select an option. Select [OK] to access the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shooting-date basis. Images shot up to nine days ago can be specified. When [Images shot in past days] is selected, images shot up to the specified number of days before the current date become viewable. Use the [ ] [ ] keys to specify the number of days, then press < > to confirm the selection.
[Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. Once you select the type of rating, the viewable images are set. [File number range] (Select range) Select the first and last images from images arranged by the file number to specify the viewable images. 1. Press < > to display the image selection screen. Use the < > dial to select images.
General Precautions on Camera Connect Communication from Smartphones Caution If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. • If the still photo shooting/movie recording switch is set to < recording will continue. >, movie • If the still photo shooting/movie recording switch is set to < >, movie recording will stop. With a Wi-Fi connection to a smartphone established, certain functions are unavailable.
Wi-Fi Connections with a Computer Using EOS Utility Connecting to a Computer via Wi-Fi Using EOS Utility, you can browse images on the camera and save them to the computer. Also in EOS Utility, you can shoot by controlling the camera remotely and change camera settings. Install EOS Utility on the computer before connecting via Wi-Fi ( ).
3. In [Network], select [Enable]. 4. Select [Connection settings]. 5. Select [SET* Unspecified].
6. Select [Create with wizard]. 7. Select [Configure online]. Select [OK]. 8. Select [EOS Utility]. Select [OK].
9. Select [Wi-Fi]. Select [OK]. 10. Select [New settings]. Select [OK]. 11. Select [Connect with WPS].
12. Select [WPS (PBC mode)]. Select [OK]. Steps on the access point 13. Connect to the access point via Wi-Fi. Press the access point's WPS button. Steps on the camera (2) 14. Select [OK].
15. Select [Auto setting]. Select [OK]. 16. Select [Disable]. Select [OK]. 17. Press < >.
18. Select [New settings]. Select [OK]. For details on subsequent operations, see Configuring EOS Utility Connection Settings.
Basic Communication Settings Preparation Displaying the Connection Wizard Checking the Type of Access Point Connecting via WPS (PBC Mode) Connecting via WPS (PIN Mode) Connecting Manually to Detected Networks Connecting Manually by Specifying Networks Connecting in Infrastructure Mode Connecting in Camera Access Point Mode Setting the IP Address Configuring Communication Function Settings Before using the following camera communication functions, configure camera and computer settings as described starting
Preparation Preparing to use communication functions EOS Utility A computer with EOS Utility (EOS software) installed is required. For EOS Utility installation instructions, visit the Canon website. FTP transfer A computer running one of the following OSes is required. The computer must also be set up in advance to function as an FTP server. • Windows 10 (ver. 1607 or later) • Windows 8.1, Windows 8.
Preparing to connect via Wi-Fi Connect the computer for the Wi-Fi connection to the access point in advance. Caution Transferring movies Each movie file is large, and transferring large files over Wi-Fi may take some time. Referring to Communication Function Precautions, arrange your network environment for stable communication between devices and the access point.
Displaying the Connection Wizard This section describes the process of following the connection wizard instructions to add connection settings. If an error is displayed, see Troubleshooting and check the settings. Be careful not to press the shutter button or other controls (which will close the connection wizard) until configuration is complete. [ : Network settings] is only available when [ : Multiple exposure] is set to [Disable]. 1. On the camera, press the < 2. Select [ 3.
4. Select [Connection settings]. 5. Select [SET*]. 6. Select [Create with wizard]. Selecting [Create from list] when multiple communication and function settings are registered on the camera enables you to combine registered settings to add new connection settings. You can also add new connection settings by using connection settings saved to a card. Configure settings this way by selecting [Load settings from card] ( ).
7. Select a setting method. Select an option and then [OK] to go to the next screen. Select [Configure online] to configure connection settings and then join the network. Select [Configure offline] if you only wish to configure [FTP trans.] and [Browser Remote] connection settings. 8. Select a communication function. [Configure online] options [Configure offline] options Referring to Preparation, select a communication function. Select an option and then [OK] to go to the next screen.
9. Select an option. The options displayed vary depending on the [Select communication function] setting. Select [OK]. 10. Select [New settings]. Select [OK]. By selecting [Select from list] when communication settings are already registered on the camera, you can apply the registered settings.
[Configure online] options If you selected [Wired] in step 9, configure the setting as follows. Select an option, then select [OK]. For details on IP address settings, see Setting the IP Address. Select an option, then select [OK]. For details on IPv6 address settings, see Setting the IP Address. If you selected [Wi-Fi] in step 9, configure the setting as follows. • For details on connections with other devices via an access point, see Checking the Type of Access Point.
[Configure offline] options If you selected [Wired] in step 9, configure the setting as follows. Select an option, then select [OK]. For details on IP address settings, see Setting the IP Address. Select an option, then select [OK]. For details on IPv6 address settings, see Setting the IP Address. If you selected [Wi-Fi] in step 9, configure the setting as follows. • For details on Wi-Fi connections with other devices via an access point, see Connecting in Infrastructure Mode.
Checking the Type of Access Point When connecting via an access point, check whether the access point supports WPS*, which simplifies connections between Wi-Fi devices. If you are unsure about WPS compatibility, refer to the access point user manual or other documentation. * Stands for Wi-Fi Protected Setup. When WPS is supported Two connection methods are available, as follows. You can connect more easily via WPS in PBC mode.
Connecting via WPS (PBC Mode) Instructions in this section are continued from Checking the Type of Access Point. This is a connection method used with access points compatible with WPS. In pushbutton connection mode (PBC mode), the camera and access point can be connected simply by pressing the WPS button on the access point. Connecting may be more difficult if multiple access points are active nearby. If so, try to connect with [WPS (PIN mode)].
3. Connect to the access point. Press the access point's WPS button. For details on where the button is and how long to press it, refer to the access point user manual. Select [OK] to initiate connection with the access point. The following screen is displayed once the camera is connected to the access point. Go to Setting the IP Address.
Connecting via WPS (PIN Mode) Instructions in this section are continued from Checking the Type of Access Point. This is a connection method used with access points compatible with WPS. In PIN code connection mode (PIN mode), an 8-digit identification number indicated on the camera is entered on the access point to establish a connection. Even if multiple access points are active nearby, connecting by using this shared identification number is relatively reliable. It may take approx. 1 min.
3. Enter the PIN code. On the access point, enter the 8-digit PIN code displayed on the camera screen. For instructions on entering PIN codes on the access point, refer to the access point's Instruction Manual. After entering the PIN code, select [OK] on the camera. 4. Connect to the access point. Select [OK] to initiate connection with the access point. The following screen is displayed once the camera is connected to the access point. Go to Setting the IP Address.
Connecting Manually to Detected Networks Instructions in this section are continued from Checking the Type of Access Point. Connect to an access point by selecting its SSID (or ESS-ID) in a list of active access points nearby. Selecting the access point 1. Select an access point. (1) SSID (2) Security icon (only for encrypted access points) (3) Channel used Turn the < > dial to select the access point to connect to in the list of access points.
Entering the access point encryption key Enter the encryption key (password) set on the access point. For details on the encryption key that has been set, refer to the access point's user manual. The screens displayed in steps 2–3 vary depending on the authentication and encryption set on the access point. Go to Setting the IP Address if the [IP address set.] screen is displayed instead of the screens shown for steps 2–3. 2. Select a key index.
3. Enter the encryption key. Press < > to access the virtual keyboard ( encryption key. ), then enter the Select [OK] to initiate connection with the access point. The following screen is displayed once the camera is connected to the access point. Go to Setting the IP Address.
Connecting Manually by Specifying Networks Instructions in this section are continued from Checking the Type of Access Point. Connect to an access point by entering its SSID (or ESS-ID). Entering the SSID 1. Select [Manual settings]. 2. Enter the SSID (network name). Press < > to access the virtual keyboard ( encryption key. Select [OK].
Setting the access point authentication method 3. Select the authentication method. Select an option and then [OK] to go to the next screen. On the [Encryption settings] screen displayed if [Open system] is selected, select [Disable] or [WEP]. Entering the access point encryption key Enter the encryption key (password) set on the access point. For details on the password that has been set, refer to the access point's user manual.
5. Enter the encryption key. Press < > to access the virtual keyboard ( encryption key. ), then enter the Select [OK] to initiate connection with the access point. The following screen is displayed once the camera is connected to the access point. Go to Setting the IP Address.
Connecting in Infrastructure Mode Instructions in this section are continued from Displaying the Connection Wizard. Connect to an access point by entering its SSID (or ESS-ID). Entering the SSID 1. Select [Infrastructure]. Select [OK]. 2. Enter the SSID (network name). Press < > to access the virtual keyboard ( encryption key. Select [OK].
Setting the access point authentication method 3. Select the authentication method. Select an option and then [OK] to go to the next screen. On the [Encryption settings] screen displayed if [Open system] is selected, select [Disable] or [WEP]. Entering the access point encryption key Enter the encryption key (password) set on the access point. For details on the password that has been set, refer to the access point's user manual.
5. Enter the encryption key. Press < > to access the virtual keyboard ( encryption key. ), then enter the Select [OK] to initiate connection with the access point. The following screen is displayed once the camera is connected to the access point. Go to Setting the IP Address.
Connecting in Camera Access Point Mode Instructions in this section are continued from Displaying the Connection Wizard. Camera access point mode is a connection method for directly connecting the camera and other devices via Wi-Fi without using an access point. Two connection methods are available, as follows. Connecting with Easy connection Network settings for camera access point mode are configured automatically.
2. Select [Easy connection]. Select [OK]. 3. Select [OK]. The next screen is displayed. 4. Select [OK]. The next screen is displayed.
5. Select [New settings]. Select [OK]. For [Configure online], go to step 6. For [Configure offline], go to step 2 in Configuring Communication Function Settings. By selecting [Select from list] when communication function settings are already registered on the camera, you can apply the registered settings. 6. Use the other device to connect to the camera.
Computer's screen (sample) Smartphone's screen (sample) Activate Wi-Fi on the other device, then select the SSID (network name) shown on the camera screen. For the password, enter the encryption key (password) shown on the camera screen. Once a connection is established, the settings screen for the communication function is displayed. Go to step 2 in Configuring Communication Function Settings. Note When you are connecting by selecting [Easy connection], the SSID ends with “_Canon0A.
Connecting with Manual connection Network settings for camera access point mode are configured manually. Set [SSID], [Channel setting], and [Encryption settings] on each screen displayed. 1. Select [Manual connection]. Select [OK]. 2. Enter the SSID (network name). Press < > to access the virtual keyboard ( After input, press < >. Select [OK]. 670 ), then enter the SSID.
3. Select a channel setting option. To specify the settings manually, select [Manual setting], then turn the < > dial. Select [OK]. 4. Select an encryption setting option. For encryption, select [AES]. Select [OK]. When [AES] is selected, the [Password] screen is displayed. Press < > to access the virtual keyboard ( ), then enter the encryption > button. key.
5. Select [Auto setting]. Select [OK]. If an error is displayed for [Auto setting], set the IP address manually ( ). 6. Select [OK]. The next screen is displayed. 7. Select [OK]. The next screen is displayed.
8. Select [New settings]. Select [OK]. For [Configure online], go to step 9. For [Configure offline], go to step 2 in Configuring Communication Function Settings. By selecting [Select from list] when communication function settings are already registered on the camera, you can apply the registered settings. 9. Use the other device to connect to the camera.
Computer's screen (sample) Smartphone's screen (sample) Activate Wi-Fi on the other device, then select the SSID (network name) shown on the camera screen. For the password, enter the encryption key (password) shown on the camera screen. Once a connection is established, the settings screen for the communication function is displayed. Go to step 2 in Configuring Communication Function Settings.
Setting the IP Address Select a method of setting the IP address, and then set the IP address on the camera. When IPv6 is used, the camera only connects via IPv6. IPv4 connections are disabled. Setting the IP address automatically Set up the IP address settings automatically. 1. Select [Auto setting]. Select [OK]. If an error is displayed for [Auto setting], set the IP address manually ( ). 2. Select an IPv6 option. Select an option and then [OK] to go to the next screen.
3. Select [OK]. The next screen is displayed. Go to Configuring Communication Function Settings. Setting the IP address manually Set up the IP address settings manually. Note that the items displayed vary depending on the communication function. 1. Select [Manual setting]. Select [OK].
2. Select an option to configure. Select an option to access the screen for numerical input. To use a gateway or DNS address, select [Enable], then select [Address]. 3. Enter the number. Turn the < > dial to switch to other input fields at the top of the screen, and turn the < > dial to select numbers to enter. Press < > to enter the selected number. To set the entered numbers and return to the screen for step 2, press the < > button.
4. Select [OK]. When you have completed setting the necessary items, select [OK]. The next screen is displayed. If you are unsure what to enter, see Checking Network Settings or ask the network administrator or other person in charge of the network. 5. Select an IPv6 option. Select an option and then [OK] to go to the next screen. When selecting [Enable], configure IPv6 settings after all settings are complete ( ). The next screen is displayed after settings are complete.
6. Select [OK]. The next screen is displayed. Go to Configuring Communication Function Settings.
Configuring Communication Function Settings The following instructions are for settings that vary depending on the communication function. Refer to the page that introduces your selected communication function. 1. Select [New settings]. Select [OK] to go to the next screen. By selecting [Select from list] when communication function settings are already registered on the camera, you can apply the registered settings.
2. Complete connection settings for the communication function.
Image Transfer to FTP Servers Configuring FTP Server Connection Settings Transferring Images Individually Transferring Multiple Images at Once Adding a Caption Before Transfer Auto Retry If Transfer Fails Viewing Transferred Images By connecting to an FTP server, you can send images on the camera to a computer. With FTP transfer, you can automatically transfer each image to the FTP server as you shoot or transfer a set of images together.
2. Select [Address setting]. The virtual keyboard is displayed if you have specified [Auto setting] for the IP address or [Manual setting] for the DNS address. A screen for numerical input is displayed if you have specified [Disable] for the DNS address. Select [OK] to go to the next screen. 3. Enter the FTP server IP address. Virtual keyboard Use the virtual keyboard ( ) to enter the IP address. If DNS is used, enter the domain name.
4. Configure the port number. Normally, set [Port number setting] to 00021 (for FTP/FTPS) or 00022 (for SFTP). Select [OK] to go to the next screen. Go to step 6 if you selected [FTP] or [FTPS] in step 1. Go to step 5 if you selected [SFTP]. 5. Configure the SSH login authentication settings. Select [User name] and [Password] to access the virtual keyboard ( ) and enter the user name and password for SSH password authentication. Select [OK] to go to the next screen. 6.
7. Configure proxy server settings. Not displayed if you selected [FTPS] or [SFTP] in step 1. Select [OK] to go to the next screen. 8. Configure the login method. Not displayed if you selected [SFTP] in step 1. Select [OK] to go to the next screen.
9. Specify a target folder. Select [Root folder] to have images saved in the root folder, as specified in FTP server settings ( ). Select [Select folder] to specify a target folder in the root folder. If the folder does not exist, it is created automatically. Select [OK] to go to the next screen. The camera's < > lamp is lit in green. When the following message appears, select [OK] to trust the target server. 10. Select [OK]. Not displayed in offline configuration.
11. Select [OK]. 12. Select [OK]. Display returns to the [Network settings] screen. Connection settings for FTP transfer are now complete. During image transfer, the camera's < > lamp blinks in green.
Importing a root certificate for FTPS If you specified [FTPS] FTP mode when configuring connection settings, the root certificate used by the FTP server must be imported to the camera. Only the root certificate with a file name of “ROOT.CER,” “ROOT.CRT,” or “ROOT.PEM” can be imported to the camera. Only one root certificate file can be imported to the camera. Insert a card containing the root certificate file in advance.
4. Select [Set root certif]. 5. Select [Load root certif from card]. 6. Select [OK]. The root certificate is imported. Select [OK] on the confirmation screen to return to the [Set root certif] screen. Note To delete the root certificate imported to the camera, select [Delete root certificate] on the screen in step 5. To check who it was issued to and issued by, the period of validity, and other information, select [View root certificate details].
Transferring Images Individually Automatic transfer after each shot Transferring the current image Specifying sizes or types of images to transfer Automatic transfer after each shot Each image can be immediately transferred to the FTP server automatically after your shot. You can continue shooting still photos as usual while images are being transferred. Before shooting, make sure a card is in the camera. If you shoot without recording images, they cannot be transferred.
3. Select [FTP transfer settings]. 4. Select [Automatic transfer]. 5. Select [Enable]. 6. Take the picture. The captured image is transferred to the FTP server. Caution Images cannot be erased during image transfer. No voice memo can be added when [Automatic transfer] is set to [Enable].
Note During continuous shooting, images are transferred to the FTP server in the order they are captured. Captured images are also stored on the card. Any images for which transfer fails or is interrupted will be transferred automatically when the connection is recovered ( ). These images can also be transferred together manually at a later time ( ). Repeated automatic transfer is not attempted if network settings (such as FTP server settings) are changed before automatic FTP transfer begins.
4. Select an image. On the camera, press the < > button. Select an image to transfer, then press < > to transfer the image. You can add a voice memo to the current image before transfer. For details, see Recording Voice Memos. Movies cannot be transferred this way. Selecting a movie and pressing < > will display the movie playback panel.
3. Select the size of images to transfer. Select [Separate JPEGs] or [Separate HEIFs], then choose the image size. To transfer smaller JPEG/HEIF images when the camera is set to record larger JPEG/HEIF images to one card and smaller ones to the other, set [Separate JPEGs] to [SmallerJPEG] or [Separate HEIFs] to [SmallerHEIF].
4. Select the type of images to transfer. Shooting RAW+JPEG • Select [Shooting RAW+JPEG], then select [JPEG only], [RAW only], or [RAW+JPEG]. Shooting RAW+HEIF • Select [Shooting RAW+HEIF], then select [HEIF only], [RAW only], or [RAW+HEIF].
Note When the camera is set to record RAW images to one card and JPEGs or HEIFs to the other, specify which images to transfer in the [Shooting RAW+JPEG] or [Shooting RAW+HEIF] setting. Similarly, specify your transfer preference when RAW+JPEG images or RAW+HEIF images are simultaneously recorded to a single card. Captured images are also stored on the card.
Transferring Multiple Images at Once Selecting images to transfer Selecting multiple images Transferring RAW+JPEG or RAW+HEIF images After shooting, you can select multiple images and transfer them all at once, or you can transfer unsent images or images that could not be sent previously. You can continue shooting still photos as usual during transfer. Caution Image transfer in progress is paused while the still photo shooting/movie recording switch is set to < >. To resume image transfer, set it to < >.
3. Select [FTP transfer]. 4. Select [Sel.Image]. 5. Select the images to transfer. Use the < > dial to select an image to transfer, then press < >. Use the < > dial to add a checkmark [ ] in the upper left of the screen, then press < >. For three-image display, press the < > button and turn the < > dial to the left. To return to single-image display, turn the < > dial clockwise. To select other images to transfer, repeat step 5. After image selection, press the < > button.
6. Select [Transfer]. 7. Select [OK]. The selected images are transferred to the FTP server.
Selecting multiple images Multiple images can be transferred at once after you choose a selection method. You can continue shooting still photos as usual while images are being transferred. 1. Access the [Image sel./transfer] screen. Follow steps 1–3 in Selecting images to transfer. 2. Select a selection method.
In a folder Select [Sel. ]. Select your preferred selection method. • Selecting [Select transfer failed images] selects all images in the selected folder for which transfer failed. • Selecting [Select images not transferred] selects all unsent images in the selected folder. • Selecting [Sel transfer fail img ( only)] selects all protected images in the selected folder for which transfer failed. • Selecting [Sel img not transfer. ( the selected folder.
Select [OK] to register the selected images to [Images to transfer].
In a card Select [All images]. Select your preferred selection method. • Selecting [Select transfer failed images] selects all images on the card for which transfer failed. • Selecting [Select images not transferred] selects all unsent images on the card. • Selecting [Sel transfer fail img ( for which transfer failed. only)] selects all protected images on the card • Selecting [Sel img not transfer. ( the card.
Select range Select [Range]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be sent. After image selection, press the < > button.
Transferring RAW+JPEG or RAW+HEIF images For RAW+JPEG or RAW+HEIF images, you can specify which image to transfer. 1. Select [ 2. Select the type of images to transfer. : Image transfer].
RAW+JPEG transfer • Select [RAW+JPEG transfer], then select [JPEG only], [RAW only], or [RAW+JPEG]. RAW+HEIF transfer • Select [RAW+HEIF transfer], then select [HEIF only], [RAW only], or [RAW+HEIF]. Caution Some menu items are not available during image transfer. Note This setting is linked to [RAW+JPEG transfer] and [RAW+HEIF transfer] settings on the [Images to transfer] screen ( ).
Adding a Caption Before Transfer You can add a registered caption to each image before transfer. This is convenient if you want to inform the recipient of the printing quantity, for example. Captions are also added to images saved to the camera. You can check captions added to images by examining the Exif information, in the user comments. Captions can be created and registered with EOS Utility ( ) or Browser Remote ( ). 1. Select [ 2. Select [Transfer with caption]. : Image transfer].
3. Specify the caption. Select [Caption], and on the screen displayed, select the content of the caption. 4. Select [Transfer]. The image is transferred with the caption. After transfer, display returns to the [Image transfer] screen. Caution Other images cannot be selected from the [Transfer with caption] screen. To select another image for transfer with a caption, view that image before following these steps.
Auto Retry If Transfer Fails If transfer fails, the camera's < > lamp blinks in red. In this case, the following screen is displayed after you press the < > button and select [ : Network settings]. To resolve the error displayed, see Troubleshooting. Once you have resolved the issue, the images that could not be sent initially will be transferred automatically.
Viewing Transferred Images Images transferred to the FTP server are stored in the following folder as specified in the FTP server settings. Target folder of the FTP server Under the default settings of the FTP server, images are stored in [C drive] → [Inetpub] folder → [ftproot] folder, or in a subfolder of this folder. If the root folder of the transfer destination has been changed in the FTP server settings, ask the FTP server administrator where images are transferred.
Sending Images to a Web Service Registering image.canon and Setting Up Auto Send This section describes how to send images to image.canon. Registering image.canon and Setting Up Auto Send You can register image.canon on the camera and prepare to send your shots automatically. A computer or smartphone with a browser and internet connection is required. You will need to enter an email address used on your computer or smartphone. For instructions on how to use image.
3. In [Network], select [Enable]. 4. Select [Upload to Web service]. 5. Select [I Agree].
6. Select [New settings]. 7. Establish a Wi-Fi connection. Connect to an access point via Wi-Fi. Go to Checking the Type of Access Point. 8. Enter your email address. Enter your email address, then select [OK].
9. Enter a four-digit number. Enter a four-digit number of your choice, then select [OK]. 10. Select [OK]. The [ ] icon changes to [ 714 ].
Steps on the computer or smartphone 9. Set up camera web link. Access the page in the notification message. Follow the instructions to complete the settings on the camera web link settings page.
Steps on the camera (2) 10. Select [Upload to Web service]. 11. Select [OK]. The [ ] icon changes to [ 716 ].
12. Select [Auto send]. Once [Enable] is set, images are automatically sent when you turn the camera on. 13. Select [Type to send]. Set to [Stills only] or [Stills+movies]. 14. Restart the camera. The images are now sent automatically. To switch networks, select [Switch network] and follow steps 5–8. To remove the connection, select [Clear camera web link settings] and then [OK]. Note All image files on cards are sent when [Auto send] is set to [Enable].
Caution Auto send does not start during interval timer shooting. Transfer stops in the following cases.
Remote Control (EOS Utility) Configuring EOS Utility Connection Settings Using EOS Utility Direct Transfer Creating and Registering Captions Using EOS Utility, you can browse images on the camera and save them to the computer. Also in EOS Utility, you can shoot by controlling the camera remotely and change camera settings. Install EOS Utility on the computer before setting up a connection ( ).
Configuring EOS Utility Connection Settings These instructions are continued from Configuring Communication Function Settings. Establishing a connection also requires operations on the computer. For details, refer to the computer documentation. Steps on the camera (1) 1. Select [OK]. The following message is displayed.
Steps on the computer 2. 3. Start EOS Utility on the computer. In EOS Utility, click [Pairing over Wi-Fi/LAN]. If a firewall-related message is displayed, select [Yes]. 4. Click [Connect] on the computer. Select the camera to connect to, then click [Connect]. If multiple cameras are listed, identify the camera to connect to by MAC address, as shown on the camera screen. The camera MAC address can be checked on the [MAC address] screen ( ).
Steps on the camera (2) 5. Select [OK]. This message is displayed after the camera detects the computer where you clicked [Connect] in step 4. Select [OK]. 6. Select [OK]. 7. Select [OK]. Display returns to the [Network settings] screen. The camera's < > lamp is lit in green. Setting information is stored on the camera. Connection settings for EOS Utility are now complete.
Using EOS Utility For EOS Utility instructions, refer to the EOS Utility Instruction Manual. Remote shooting is only one of the many camera operations available. Caution Some menu items are not available when the camera is connected to a network. In remote shooting, the AF speed may become slower. Depending on the communication status, image display or shutter release timing may be delayed.
Direct Transfer With the camera connected to EOS Utility and the main EOS Utility window displayed, you can use the camera to transfer images to computer. If you will transfer many images, consider using a household power outlet accessory (sold separately). Selecting images to transfer 1. Select [ 2. Select [Image sel./transfer]. 3. Select [Direct transfer]. : Image transfer].
4. Select [Sel.Image]. 5. Select an image to transfer. Use the < > dial to select an image to transfer, then press < >. Use the < > dial to add a checkmark [ ] in the upper left of the >. screen, then press < For three-image display, turn the < > dial counterclockwise. To > dial clockwise. return to single-image display, turn the < To select other images to transfer, repeat step 5. After image selection, press the < > button. 6. Select [Transfer].
7. Select [OK]. The selected images are transferred to the computer.
Selecting multiple images Multiple images can be transferred at once after you choose a selection method. 1. Access the [Image sel./transfer] screen. Follow steps 1–3 in Selecting images to transfer. 2. Select a selection method.
In a folder Select [Sel. ]. Select your preferred selection method. • Selecting [Select transfer failed images] selects all images in the selected folder for which transfer failed. • Selecting [Select images not transferred] selects all unsent images in the selected folder. • Selecting [Sel transfer fail img ( only)] selects all protected images in the selected folder for which transfer failed. • Selecting [Sel img not transfer. ( the selected folder.
Select [OK] to register to [Images to transfer].
In a card Select [All images]. Select your preferred selection method. • Selecting [Select transfer failed images] selects all images on the card for which transfer failed. • Selecting [Select images not transferred] selects all unsent images on the card. • Selecting [Sel transfer fail img ( for which transfer failed. only)] selects all protected images on the card • Selecting [Sel img not transfer. ( the card.
Select range Select [Range]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be sent. After image selection, press the < > button. Select [OK] to register the selected images to [Images to transfer].
Transferring RAW+JPEG or RAW+HEIF images For RAW+JPEG or RAW+HEIF images, you can specify which image to transfer. 1. Select [ 2. Select the type of images to transfer. : Image transfer].
RAW+JPEG transfer • Select [RAW+JPEG transfer], then select [JPEG only], [RAW only], or [RAW+JPEG]. RAW+HEIF transfer • Select [RAW+HEIF transfer], then select [HEIF only], [RAW only], or [RAW+HEIF]. Caution Some menu items are not available during image transfer. Note This setting is linked to [RAW+JPEG transfer] and [RAW+HEIF transfer] settings on the [Images to transfer] screen ( ).
Creating and Registering Captions You can create captions and register them on the camera to use them as described in Adding a Caption Before Transfer. 1. Start EOS Utility and select [Camera settings]. 2. Select [WFT Captions]. 3. Enter the caption or captions. Enter up to 31 characters (in ASCII format). To acquire caption data stored on the camera, select [Load settings].
4. Set the captions on the camera. Select [Apply to camera] to set your new captions on the camera.
Controlling the Camera with Browser Remote Configuring Browser Remote Connection Settings Displaying Browser Remote Browsing Images Shooting Remotely Registering IPTC Information Configuring FTP Server Settings Creating and Registering Captions Using a browser, you can browse and save camera images, shoot remotely, and perform other operations on a computer or smartphone. Caution The following operations cannot be performed when the camera's still photo shooting/movie recording switch is set to < >.
Configuring Browser Remote Connection Settings These instructions are continued from Configuring Communication Function Settings. Specify a login name and password for accessing the camera from a computer. The login name and password you specify here are used when connecting to the camera. 1. Select [Full control] or [Browser *]. Browser Remote enables camera access by users at up to three computers at once. The [Full control] account can use all Browser Remote features.
3. Select [OK]. 4. Select [OK]. 5. Select [OK]. Display returns to the [Network settings] screen. Setting information is stored on the camera. Connection settings for Browser Remote are now complete. Note You can change account settings on the [Account settings] screen ( ), accessed by selecting [Browser Remote settings] in [Connection option settings]. The port number setting can also be changed on the [Browser Remote settings] screen by selecting [Port no. (HTTP)] or [Port no. (HTTPS)].
Displaying Browser Remote From a browser, log in to the Browser Remote page on the camera. Make sure the camera and computer are already connected via a wired LAN connection. Checking the camera's IP address The camera's IP address, as displayed in step 5, must be entered in the browser address bar to access the camera from a browser. 1. Select [ 2. Select [Connection settings]. 3. Select [SET* Browser Remote]. : Network settings].
4. Select [Confirm settings]. Setting details are displayed. 5. Check the settings. Turn the < > dial to access other pages. Write down the IP address. After checking, press the < > button to close the confirmation screen. Logging in to Browser Remote 6. Start a browser. Start a browser on the computer. 7. Enter the URL. In the address bar, enter the IP address you noted in step 5. Press the key.
8. Enter the information for [Login name] and [Password]. In [Login name] (user name) and [Password], enter the information you specified in Configuring Browser Remote Connection Settings. Select [OK] to display the top Browser Remote menu screen. 9. Configure default settings as needed. Select [ ] to display the menu.
• Language Enables you to select the display language. • Display theme You can set the Browser Remote background color. • AF for still photo shooting Displayed if you select [Shooting] in step 9. Enables you to configure how autofocus is used in still photo shooting.
• Shutter mode Displayed if you select [Shooting] in step 9. You can set the shutter method for shooting still images. • Anti-flicker shoot. Displayed if you select [Shooting] in step 9. Enables you to configure anti-flicker shooting. • HF anti-flicker shooting Displayed if you select [Shooting] in step 9. Enables you to configure high-frequency anti-flicker shooting.
• HTTPS settings Enables you to download a root certificate and access an FTP server, when you will connect to the FTP server via HTTPS. • Log out Select to end the Browser Remote connection. Caution Browser Remote is not available unless the browser support JavaScript. Some menu items are not available when connected to the camera via Browser Remote.
Browsing Images Enables you to browse images on cards in the camera. 1. Select [Playback]. The image browsing screen is displayed.
2. Select a card and folder. Select a card in the pull-down list at left. Select a folder in the pull-down list at right. 3. Perform image operations as needed.
The image taken is automatically displayed by turning on [Auto update]. With [Select] selected, you can select multiple images. Selecting individual thumbnails selects each image separately. Selecting thumbnails again clears the selection. Selecting [Select all] marks all images on the browsing screen as selected. Selecting [Clear all] clears selection of all images. Selecting [Cancel] returns to the browsing screen.
Selecting a thumbnail switches to the playback screen and shows the image enlarged.
Audio playback screen Selecting an image and then [ ] erases the image. Selecting an image and then the [ the computer. ] button downloads the image to Note Computer performance and the browser used may prevent or delay image display or prevent image downloading.
Shooting Remotely You can use Browser Remote to shoot remotely. Shooting still photos 1. Select [Shooting]. The remote shooting screen is displayed.
(1) Still photo shooting button (2) Movie shooting button (3) Multi-function lock icon (4) Shutter button (5) MF toggle button (6) AF area (7) Metering mode (8) Drive mode (9) HDR shooting (10) Image quality (11) Still photo cropping/Aspect ratio (12) Battery level/Temperature warning (13) Browser Remote connection (14) Available shots (15) Electronic shutter (16) Anti-flicker shooting (17) AF button (18) Shooting mode (19) Shutter speed (20) Aperture value (21) Expo
2. Select (1) Still photo shooting button. 3. Set the lens's focus mode switch to < 4. Display the Live View image. >. To show or hide the Live View image, select (29) Live View shooting button. For more responsive Live View image display, select (30) Live View image quality toggle button, which will reduce Live View image quality to improve responsiveness. Select it again to restore the original image quality.
5. Set up shooting. Select setting items (such as image quality) to view the setting details, which you can configure. Configure the settings as needed.
6. Focus on the subject. When using autofocus To start AF with [AF button] selected in the [AF for still photo shooting] menu, select the (17) AF button. If you selected [Shutter button for AF/shooting] on the [AF for still photo shooting] menu, when you select the (4) Shutter button, AF is performed and a picture is taken. When focusing manually To show/hide (28) MF button display, select (5) MF toggle button. Select (28) MF button, then focus manually.
7. Take the picture. Select the (4) Shutter button to shoot. Captured images are saved to the card in the camera. To browse and download images, see Browsing Images. Caution Depending on the communication status, image display or shutter release timing may be delayed. Still photo shooting is not available when the camera's still photo shooting/movie recording switch is set to < >.
Recording movies 1. Select [Shooting]. The remote shooting screen is displayed. 2. Select (2) Movie shooting button. 3. Configure settings as needed. Follow steps 3–6 in Shooting still photos.
4. Record the movie. Movie recording standby Movie recording in progress Select (4) Shutter button, and when you release the button, movie recording begins. During movie recording, the red [○] on (4) Shutter button changes to a white [□]. To stop movie recording, select (4) Shutter button again and release the button.
Registering IPTC Information Enables you to edit and register IPTC* information (comments on images, such as captions, credits, and shooting locations) on the camera. Images can be tagged with IPTC information registered on the camera. * International Press Telecommunications Council 1. Select [IPTC info]. A screen for editing IPTC information is displayed. 2. Select [Load from file]. Selecting [Load from file] enables you to load IPTC information (in XMP format) that was saved using EOS Utility.
3. Edit and register information as needed. Selecting [Add to camera] to applies the edited IPTC information to the camera. This also sets the camera's Custom Function [ : Add IPTC information] option to [ ]. Selecting [Clear camera info] deletes all IPTC information registered on the camera. This also sets the camera's Custom Function [ information] option to [ ]. Selecting [Clear] clears all IPTC information.
Configuring FTP Server Settings If you will use FTP transfer for images captured remotely, you can use the camera's connection settings ( ) to change the target FTP server. 1. Select [FTP settings]. The FTP setting screen is displayed.
2. Select registered connection settings of the FTP server to use. 3. Select [Change setting]. The camera's connection settings are changed to your selected settings. Note To use [FTP settings], you must register both [Browser Remote] ( transfer] ( ) in the camera's connection settings.
Creating and Registering Captions You can create captions and register them on the camera to use them as described in Adding a Caption Before Transfer. 1. Select [FTP settings]. The FTP setting screen is displayed.
2. Enter the caption or captions. Enter up to 31 characters (in ASCII format). To acquire caption data stored on the camera, select [Get from camera]. 3. Set the captions on the camera. Select [Add to camera] to set your new captions on the camera.
Ending Connections or Reconnecting Ending Connections Reconnecting Ending Connections 1. Select [ 2. Select [Connection settings]. : Network settings].
3. Select [Disconnect]. 4. Select [OK]. The devices are disconnected.
Reconnecting 1. Select [ 2. Select [Connection settings]. 3. Select [SET*]. : Network settings]. In the saved settings, select settings to use for the connection.
4. Select [Connect]. 5. Select [OK]. The devices are connected again. If settings were changed on the target device, restore the previous settings to enable connections by the camera.
Airplane Mode You can temporarily disable Wi-Fi functions. 1. Select [ 2. Set to [On]. [ : Airplane mode]. ] is displayed on the screen. Note [ ] may not be displayed in still photo shooting, movie recording, or playback, depending on display settings. If it is not displayed, press the < > button repeatedly to access detailed information display.
Checking and Editing Network Settings Checking and Editing Connection Settings Manually Editing Connection Settings Specifying Connection Options Checking the MAC Address Checking and Editing Connection Settings You can check, change, or delete connection settings saved on the camera. 1. Select [ 2. Select [Connection settings]. : Network settings].
3. Select [SET*]. In the saved settings, select settings to use for the connection.
4. Check or change the settings. Connect • Select to re-establish a connection ( ). Change with wizard/Change from list • Change connection settings ( ). Save/load settings on card • Save connection settings to a card, or load saved connection settings from a card into the camera ( ). Delete settings • Select to delete connection settings. • Selecting [OK] deletes the settings. Confirm settings • Select to check connection settings.
Changing connection settings Settings originally completed using the connection wizard can be changed as follows. Change with wizard You can use the connection wizard to change connection settings saved on the camera. 1. Access the [Connection settings] screen. Follow steps 1–3 in Checking and Editing Connection Settings. 2. Select [Change with wizard]. 3. Use the connection wizard to change connection settings. See instructions starting with Displaying the Connection Wizard.
Change from list You can use communication and function settings saved on the camera to change connection settings saved on the camera. You can also register settings names. 1. Access the [Connection settings] screen. Follow steps 1–3 in Checking and Editing Connection Settings. 2. Select [Change from list]. 3. Select an option and change setting details as needed. Settings name • Select to name sets of settings. Use the virtual keyboard ( enter text.
NW*/Comm settings* • Select to change, add, or clear communication settings. • Selecting [Select from list] lists communication settings saved on the camera. Select the communication settings to use. To view communication setting details, select settings and press the < > button. • Selecting [Clear selected] clears communication settings with registered connection settings. Select [OK] on the confirmation screen. MODE*/Function settings* • Select to change, add, or clear function settings.
Saving and loading settings Connection settings can be saved on a card and applied to other cameras. Connection settings configured on other cameras can also be applied to the camera you will use. Note [ : Save/load cam settings on card] enables you to save all communication settings on the camera to a card or load all communication settings for another camera from a card. Saving settings 1. Access the [Connection settings] screen. Follow steps 1–3 in Checking and Editing Connection Settings. 2.
4. Select [OK]. The file name is determined automatically by the camera: WFTNPF, followed by a number (01 to 40) and the extension NIF. To rename the file as desired, press the < > button. The settings are saved to the card. The settings file is saved to an area of the card shown when the card is opened (in the root directory). Caution 40 settings files can be saved on one card from the camera. To save 41 or more, use another card.
Loading settings 1. Access the [Connection settings] screen. Follow steps 1–3 in Checking and Editing Connection Settings. 2. Select [Save/load settings on card]. 3. Select [Load settings from card]. 4. Select a settings file. Select a settings file that matches your network environment.
5. Select [OK]. Information from the settings file is loaded into the selected settings number. Caution Even if a computer or other device is used to save 41 or more settings files on a card, only 40 are displayed on the camera's screen for loading settings. To load 41 or more settings files, load 40 from one card, then load remaining files from another card.
Manually Editing Connection Settings You can add, change, or delete communication and function settings saved on the camera. You can also configure settings that are not set using the connection wizard, such as a setting that determines what happens if files with the same name as existing files are sent to the FTP server. Editing communication settings 1. Select [ 2. Select [Manual setting]. 3. Select [Comm settings]. : Network settings].
4. Select [NW*]. Select saved settings to edit. 5. Change, delete, or check the settings as needed. Change • Select to change individual settings in sets of communication settings. • Selecting [Wireless LAN] enables you to change the target SSID, for example. • Selecting [TCP/IPv4] enables you to configure network-related settings such as the IP address. • Selecting [TCP/IPv6] enables you to configure settings used for IPv6 ( ). • Depending on the communication setting, not all items may be displayed.
Delete settings • Select to delete communication settings. • Selecting [OK] deletes the settings. Confirm settings • Select to check communication settings.
Editing function settings 1. Select [ 2. Select [Manual setting]. 3. Select [Function settings]. 4. Select [MODE*]. : Network settings]. Select saved settings to edit.
5. Change, delete, or check the settings as needed. Change • Selecting [Change mode name] enables you to use the virtual keyboard ( ) to rename the mode.
• Selecting [FTP server] enables you to configure settings related to the FTP server.
• Selecting [Viewable imgs] enables you to specify which images can be viewed on smartphones. Settings to Make Images Viewable from Smartphones Delete settings • Select to delete function settings. • Selecting [OK] deletes the settings. Confirm settings • Select to check function settings.
Directory structure of the target folder Configured in [FTP server] → [Directory structure]. With [Default], the root folder is used for image storage. If you have created a subfolder in the root folder by changing the [Target folder] setting, images are saved in that folder. Selecting [Camera] automatically creates a folder structure matching that of the camera's (such as A/DCIM/100EOSR3) in the server's root folder for image storage.
Specifying Connection Options You can configure settings used for FTP transfer and Browser Remote. Settings are also available for authentication information used in LAN environments with 802.1X authentication. 1. Select [ 2. Select [Connection option settings]. 3. Select an option to configure. : Network settings]. FTP transfer settings Browser Remote settings Smartphone settings 802.
FTP transfer settings Selecting [FTP transfer settings] enables you to configure settings related to FTP transfer and power saving. Automatic transfer / Images to transfer / Transfer with SET / Set root certif • For details, see Image Transfer to FTP Servers. Power saving • When [Enable] is set and no image is transferred for a certain period, the camera will log off from the FTP server and disconnect from the LAN.
Browser Remote settings Selecting [Browser Remote settings] enables you to set the account used for Browser Remote access and configure HTTP/HTTPS communication settings. Account settings • For details, see Configuring Browser Remote Connection Settings. Port no. (HTTP)/Port no. (HTTPS) • You can change the port number used for HTTP/HTTPS communication. There is normally no need to change the port number (80 for HTTP, 443 for HTTPS).
Smartphone settings Selecting [Send to smartphone after shot] in [Smartphone settings] enables you to set the size of images to send automatically. Auto send / Size to send • For details, see Automatic Image Transfer as You Shoot.
802.1X authentication Selecting [802.1X authentication] enables you to set, check, or delete 802.1X authentication settings, using a setup wizard. Configure these settings when connecting to networks that require 802.1X authentication. First, save the certificate for the type of 802.1X authentication used to a card in the camera. File types and names that can be loaded using this function are as follows. Type File Name 8021X_R.CER Root certificate 8021X_R.CRT 8021X_R.PEM 8021X_C.
Note that the camera supports following protocols. Protocol Supported Authentication EAP-TLS X.509 EAP-TTLS MSCHAPv2 PEAP MSCHAPv2 Setup wizard • Follow the wizard to configure the authentication settings. Confirm settings • Select to check authentication settings. Delete settings • Select to delete authentication settings. Selecting [OK] on the screen displayed deletes the settings.
Checking the MAC Address You can check the camera's MAC address. 1. Select [ 2. Select [MAC address]. 3. Check the MAC address. : Network settings]. The MAC addresses for [Wi-Fi] and [Wired] are displayed.
Syncing Time Between Cameras Preparing for Time Syncing Syncing the Time You can set the sender camera time on up to 10 receiver cameras. Note that even after synchronization, a slight margin of error applies between sender and receiver camera time (of ±0.05 seconds, at most). Caution Always use cameras of the same model to sync the time. Synchronizing the time on receiver cameras is not possible with different models of the sender and receiver cameras. This feature will not be available after 2038.
Preparing for Time Syncing When using a single receiver camera, connect a LAN cable to the Ethernet RJ-45 terminal of the sender and receiver cameras.
When using multiple receiver cameras, connect a LAN cable from the Ethernet terminal of the sender and receiver cameras to a hub. Up to 10 receiver cameras can be connected. (A) Sender camera (B) Receiver camera (C) LAN cable (D) Hub Use a highly shielded Category 5e or higher STP (Shielded Twisted Pair) Gigabit Ethernet cable.
Syncing the Time Preparing the sender camera First, set up the camera to use as a sender. 1. 2. Select [ 3. In [Network], select [Enable]. 4. Select [Sync time between cameras]. On the camera, press the < > button. : Network settings]. If the camera is already connected to another device, [Set [Connection settings] to [Disconnect]] is displayed. Select [OK] to end the connection.
5. Select [OK]. 6. Select [OK]. 7. Select [Sender]. Select [OK] to go to the next screen. After the screen is displayed, the camera is ready.
Preparing receiver cameras Set up cameras to use as receivers. 1. 2. Follow steps 1–6 in Preparing the Sender Camera. Select [Receiver]. Select [OK] to go to the next screen. 3. Select [OK]. The following screen is displayed. To set the time on multiple receiver cameras, follow steps 1–2 on each receiver camera. The number of receiver cameras detected is displayed on the sender camera screen.
Syncing time between sender and receiver cameras Sync the time on the sender and receiver cameras as follows. 1. 2. Follow steps 1–6 in Preparing the sender camera and steps 1–3 in Preparing receiver cameras. On the sender camera, select [OK]. Check the number of receiver cameras, then select [OK]. After the time is synchronized, the next screen is displayed. 3. Select [OK] on all of the cameras.
Setting Up GPS Features GPS Settings GPS Precautions GPS features of the camera can be used to geotag images, set the time, and more. The camera can receive signals from GPS satellites (USA), GLONASS satellites (Russia), and the Quasi-Zenith Satellite System “Michibiki” (Japan). Caution Geotag information may not be recorded or inaccurate information may be recorded where GPS signal coverage is poor, such as in the following places.
GPS Settings 1. Select [ 2. Configure GPS details. : GPS settings].
GPS Specify the GPS operating mode. In [Mode 1], the camera continues to acquire GPS signals at regular intervals with the > or even < >. power switch set to < In [Mode 2], the camera acquires GPS signals with the power switch set to < >. Setting the power switch to < > also deactivates GPS features. Note that after auto power off is activated, the camera continues to receive GPS signals at regular intervals.
Auto time setting Time information acquired from GPS signals can be set on the camera. The margin of error is approx. ±0.02 sec. Selecting [Auto update] will update the time when GPS signals are received while the camera is on. Caution The time cannot be automatically updated unless signals from at least five GPS satellites can be acquired. [Set now] will be grayed-out and unavailable. Even if [Set now] can be selected, time adjustment may not be possible, depending on the timing of GPS signal acquisition.
GPS information display Shows acquired GPS information. ] icon indicates signal conditions. When [ ] is displayed, elevation is also The [ recorded. Note that elevation is not recorded when [ ] is displayed. You can check geotag information by displaying a shot, pressing the < access playback screens with detailed information, and then pressing < > button to >.
GPS logger By setting [Log GPS position] to [Enable], you can automatically record geotag information at specific intervals along the route that the camera travels. Geotag information is recorded at the interval set in [Position update intvl] as log data saved in the camera's internal memory by date. You can also view the route traveled on a map displayed on a computer. Position update intervals and log data capacity (in days) are as follows. (Approx.
Caution In [Mode 1], GPS logging continues even with the power switch set to < >. In [Mode 2], setting the power switch to < > deactivates GPS logging. However, GPS logging continues during auto power off. Geotag information added to images may be inaccurate under some traveling conditions, in some locations, or under some GPS settings. Transferring log data to a card You can transfer recorded log data to a card selected in [Transfer log data to card].
Position data retention To continue geotagging images even where satellite coverage is poor (if you go indoors, for example) by using geotag information in log data, setting [Position data retention] to [Unlimited] is recommended. The most recently acquired geotag information is added to log data until new information can be acquired. When a time such as [10 min.] is set, after geotag information cannot be acquired, the most recent geotag information is added to log data for the specified period.
GPS Precautions Countries/regions permitting use of GPS functions Use of GPS features is restricted in some countries and regions, and illegal use may be punishable under national or local regulations. To avoid violating GPS regulations, visit the Canon website to check where use is allowed. Note that Canon cannot be held liable for any problems arising from use of GPS functions in other countries and regions.
Connecting to a Wireless Remote Control Canceling the Pairing This camera can also be connected to Wireless Remote Control BR-E1 (sold separately, via Bluetooth for remote control shooting. 1. Select [ 2. In [Bluetooth], select [Remote]. 3. Select [Pairing]. : Bluetooth settings].
4. Pair the devices. When the [Pairing] screen appears, press and hold the and buttons on the BR-E1 simultaneously for at least 3 sec. After a message confirms that the camera is paired with the BR-E1, press < >. 5. Set up the camera for remote shooting. When shooting still photos, select [ For movie recording, set [ ] or [ ] as the drive mode ( : Remote control] to [Enable]. For instructions after the pairing is complete, refer to the BR-E1's Instruction Manual.
Canceling the Pairing Before pairing with a different BR-E1, clear the information about the connected remote control. 1. Select [ 2. Select [Check/clear connection info]. 3. Press the < : Bluetooth settings]. > button.
4. Select [OK].
Reference Changing the Camera Nickname Virtual Keyboard Operations Configuring IPv6 Changing the Camera Nickname You can change the nickname of this camera (displayed on connected devices) as desired. 1. Select [ 2. Enter text using the virtual keyboard ( : Nickname]. ). When you finish entering characters, press the < 814 > button.
3. Select [OK].
Virtual Keyboard Operations (1) Input area, for entering text (2) Cursor keys, for moving in the input area (3) Current no. of characters/no. available (4) Keyboard (5) Switch input modes (6) Space (7) Delete a character in the input area (8) Exit input Use < > or the < > or < > dial to move within (2) and (4)–(7). Press < > to confirm input or when switching input modes.
Configuring IPv6 To use IPv6, configure the settings manually. Note If you are unsure what to enter, ask the network administrator or other person in charge of the network. 1. Select [ 2. Select [Manual setting]. 3. Select [Comm settings]. : Network settings].
4. Select the communication settings that will use IPv6. 5. Select [Change]. 6. Select [TCP/IPv6].
7. Select an option to configure. Use TCP/IPv6 • Select [Enable] or [Disable] for IPv6. Manual setting • To set the IP address manually, select [Enable]. [DNS server] is set to [Manual setting], and you can configure [DNS address], [Manual address], [Prefix length], and [Gateway].
DNS server • To set the DNS server IP address manually, select [Manual setting]. • Select [Disable] if you will not use a DNS server. • If the setting is currently [Auto assign], setting [Manual setting] to [Enable] changes it to [Manual setting]. DNS address/Manual address/Gateway • Select an option and enter the IP address. Prefix length • To set the prefix length, turn the < 128).
Troubleshooting Responding to Error Messages Troubleshooting Guide Communication Function Precautions Security Checking Network Settings Responding to Error Messages Resolve any errors displayed on the camera screen by referring to these examples of > lamp on the camera blinks and the corrective actions. When errors occur, the < error number is shown on the LCD panel. You can also check error details by accessing [ : Network settings] → [Error description].
11: Connection target not found In the case of [Smartphone], is Camera Connect running? • Establish a connection using Camera Connect ( ). In the case of [EOS Utility], is EOS Utility running? • Start EOS Utility and try to connect again ( ). Are the camera and the access point set to use the same encryption key for authentication? • This error occurs if the encryption keys do not match when the authentication method for encryption is [Open system].
21: No address assigned by DHCP server What to check on the camera On the camera, the IP address is set to [Auto setting]. Is this the correct setting? • If no DHCP server is used, configure the setting after setting the IP address to [Manual setting] on the camera ( ). What to check on the DHCP server Is the power of the DHCP server on? • Turn on the DHCP server. Are there enough addresses for assignment by the DHCP server? • Increase the number of addresses assigned by the DHCP server.
22: No response from DNS server What to check on the camera On the camera, the DNS address is set to [Manual setting]. Is this the correct setting? • If no DNS server is used, set the camera's DNS address setting to [Disable] ( ). On the camera, does the DNS server's IP address setting match the server's actual address? • Configure the IP address on the camera to match the actual DNS server address ( , ). What to check on the DNS server Is the power of the DNS server on? • Turn on the DNS server.
23: Device with same IP address exists on selected network Is another device on the camera network using the same IP address as the camera? • Change the camera's IP address to avoid using the same address as another device on the network. Otherwise, change the IP address of the device that has a duplicate address. • If the camera's IP address is set to [Manual setting] in network environments using a DHCP server, change the setting to [Auto setting] ( ).
What to check on the FTP server Is the FTP server working correctly? • Configure the computer correctly to function as an FTP server. • If applicable, ask your network administrator for the FTP server address and port number, then set them on the camera. Is the FTP server on? • Turn on the FTP server. The server may have been turned off because of an energy-saving mode.
What to check on the network as a whole Does your network include a router or similar device that serves as a gateway? • If applicable, ask your network administrator for the network gateway address and set it on the camera ( , ). • Make sure that the gateway address setting is correctly entered on all network devices including the camera.
43: Cannot connect to FTP server. Error code received from server. What to check on the proxy server Is the proxy server on? • Turn on the proxy server. Is the proxy server working correctly? • Check the proxy server settings to make sure the server is working correctly as a proxy server. • If applicable, ask your network administrator for the proxy server's address setting and port number, then set them on the camera.
45: Cannot login to FTP server. Error code received from server. What to check on the camera On the camera, is the [Login name] set correctly? • Check the login name for accessing the FTP server. Check upper- and lower-case letters, and make sure the correct login name is set on the camera ( ). On the camera, is the [Login password] set correctly? • Check upper- and lower-case letters, and make sure the correct login password is set on the camera ( ).
46: For the data session, error code received from FTP server What to check on the FTP server The connection was terminated by the FTP server. • Restart the FTP server. Do the user rights for the FTP server allow reading, writing, and log access? • Configure the FTP server's user rights to allow reading, writing, and log access.
61: Selected SSID wireless LAN network not found Are any obstacles blocking the line of sight between the camera and the antenna of the access point? • Move the antenna of the access point to a position clearly visible from the point of view of the camera. What to check on the camera Does the SSID set on the camera match that of the access point? • Check the SSID at the access point, then set the same SSID on the camera ( ).
65: Wireless LAN connection lost Are any obstacles blocking the line of sight between the camera and the antenna of the access point? • Move the antenna of the access point to a position clearly visible from the point of view of the camera. The wireless LAN connection was lost, for some reason, and the connection cannot be restored. • The following are possible reasons: excessive access to the access point from another device, a microwave oven or similar appliance in use nearby (interfering with IEEE 802.
81: Wired LAN connection lost Is the LAN cable securely connected? • Reconnect the LAN cable between the camera and server. Because the cable may be severed, try using another cable to connect the devices. Is the hub or router on? • Turn on the hub or router. Is the server on? • Turn on the server. The server may have been turned off because of an energysaving mode. 91: Other error A problem other than error code number 11 to 83 occurred. • Turn the camera's power switch off and on.
127: An error has occurred A problem other than error code number 121 to 126 occurred while the camera is connected to the Web service. • Try again to establish the Wi-Fi connection to image.canon. 130: The server is currently busy Please wait a moment and try again The image.canon site is busy at the moment. • Try accessing image.canon over Wi-Fi again later. 131: Try again An error occurred when connecting to image.canon over Wi-Fi. • Try again to establish the Wi-Fi connection to image.canon.
Troubleshooting Guide Troubleshoot camera issues by checking the camera and connected devices as described in this section. If troubleshooting does not resolve the problem, contact a Canon Service Center for product information and advice on product handling. Cannot transfer images to an FTP server. Set the still photo shooting/movie recording switch to < > if you will transfer images to an FTP server after shooting.
Communication Function Precautions In case of slower transmission, lost connections, choppy image display, or other problems when using communication functions, try the following corrective actions. Access point and antenna installation location When using the camera indoors, install the access point in the same room where you are shooting. Install the device where people or objects do not come between the device and the camera. Install the device higher than the camera.
Security If security settings have not been properly set, the following problems may occur. Transmission monitoring Third parties with malicious intent may monitor wireless LAN transmissions and attempt to acquire the data you are sending. Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Checking Network Settings Windows Open the Windows [Command Prompt], then enter ipconfig/all and press the key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. macOS In macOS, open the [Terminal] application, enter ifconfig -a, and press the key. The IP address assigned to the computer is indicated in the [en0] item next to [inet], in the format “***.***.***.***”.
Resetting Communication Settings All settings of network features can be cleared. This can prevent the information from being leaked if you lend the camera or transfer ownership. 1. Select [ 2. Select [OK]. : Reset communication settings]. Caution If you have paired the camera with a smartphone, on the smartphone's Wi-Fi settings screen, remove the Wi-Fi connection information of the camera for which you restored default wireless communication settings.
Set-up This chapter describes menu settings on the set-up [ ] tab.
Tab Menus: Set-up Set-up 1 (1) Record func+card/folder sel.
Set-up 3 (1) Screen/viewfinder display (2) Screen brightness (3) Viewfinder brightness (4) Screen/viewfinder color tone (5) Fine-tune VF color tone (6) UI magnification (7) HDMI resolution Set-up 4 (1) Eye control (2) Touch control (3) Multi function lock (4) Shutter at shutdown (5) Sensor cleaning (6) Choose USB connection app 842
Set-up 5 (1) Reset camera (2) Custom shooting mode (C1-C3) (3) Save/load cam settings on card (4) Battery info.
Selecting Cards for Recording/Playback Recording Method with Two Cards Inserted Recording/Playback Selection with Two Cards Inserted Recording is possible when card 1 ( ) or 2 ( ) is in the camera (except under some conditions). With only one card inserted, there is no need to follow these steps. With two cards inserted, you can select the recording method and card to use for recording and playback as follows. Recording Method with Two Cards Inserted 1. Select [ : Record func+card/folder sel.].
2. Set the recording method. / separate • Select [Enable] for automatic configuration of the recording method for still photos and movies. Movies are recorded to card and still photos to card . • Movie recording is not possible if card is full or not inserted. • Without card inserted, still photos can be captured but not saved. Still photo shooting is not possible if the card is full. Caution Specifying [Enable] will make [ Rec options], [ Rec options], [ Record/play], and [ Record/play] unavailable.
Rec options Set the recording method for still photos. • Standard Records still photos to the card selected in [ Record/play]. • Auto switch card Same as [Standard], but additionally, the camera switches to the other card when one card becomes full. At this time, a new folder is created. • Rec. separately Enables you to set a specific image size for each card ( ). For in your each shot, a still photo is recorded to card and specified image quality.
Note Rec. separately/Rec. to multiple Images are recorded with the same file number to card and . The number of shots available as shown in the viewfinder and on the Quick Control screen is for the card with less free space. [Card* full] is displayed when one of the cards becomes full, and shooting is no longer possible. To continue shooting, either replace the card or set [ Rec options] to [Standard] and select the card with free space.
Rec options Set the recording method for movies. • Standard Records movies to the card selected in [ Record/play]. • Auto switch card Same as [Standard], but recording ends when the card becomes full. When you resume recording, the camera switches to the other card for recording. A new folder is created after switching cards. • , For each recording, a RAW movie is recorded to card and an MP4 movie to card , both with the same file number. When one card becomes full, recording is no longer possible.
Caution Rec. to multiple Record to multiple is not available for the following movies. • RAW movies • 4K 59.94/50.00 fps ALL-I • 4K High Frame Rate movies Note Rec. to multiple Images are recorded with the same file number to card . and The number of shots available as shown in the viewfinder and on the Quick Control screen is for the card with less free space. [Card* full] is displayed when one of the cards becomes full, and shooting is no longer possible.
Recording/Playback Selection with Two Cards Inserted With [ Rec options]/[ Rec options] set to [Standard] or [Auto switch card], select the card for recording and playback. With [ Rec options] set to [Rec. separately] or [Rec. to multiple], or with [ Rec options] set to [ , ] or [Rec. to multiple], select the card for playback. Setting via the menu Standard/Auto switch card Select [Record/play]. • Select [ Record/play] for still photos or [ Record/play] for movies.
Note With [Priority: ] set, the camera switches to the priority card when cards are inserted or removed.
Folder Settings Creating a Folder Renaming Folders Selecting a Folder You can freely create and select the folder where the captured images are to be saved. You can also rename folders. Creating a Folder 1. Select [ : Record func+card/folder sel.]. 2. Select [Folder].
3. Select [Create folder]. 4. Select [OK]. To rename the folder, select [Change folder name].
Renaming Folders 1. Enter letters and numbers of your choice. You can enter five characters. By selecting [ ], you can change the input mode. To delete single characters, select [ Use the < > or < > dial or < press < > to enter it. 2. ] or press the < > to select a character, then Exit the setting. Press the < > button, then press [OK]. 854 > button.
Selecting a Folder (1) Number of images in folder (2) Lowest file number (3) Folder name (4) Highest file number Select a folder on the folder selection screen. Captured images are stored in your selected folder. Note Folders Folders are named as in “100EOSR3,” with a three-digit folder number followed by five letters or numbers. A folder can contain up to 9999 images (file number 0001– 9999). When a folder becomes full, a new folder with the folder number increased by one is created automatically.
File Numbering Continuous Auto Reset Manual Reset The captured images saved in a folder are assigned a file number from 0001 to 9999. You can change how the image files are numbered. (Example) (1) File number 1. Select [ : File numbering].
2. Set the item. Select [Numbering]. Select [Continuous] or [Auto reset]. If you want to reset the file numbering, select [Manual reset] ( ). Select [OK] to create a new folder, and the file number will start with 0001. Caution If the file number in folder 999 reaches 9999, shooting will not be possible even if the card still has free space. After a message requesting you to replace the card is displayed, switch to a new card.
Continuous For continuous file numbering regardless of switching cards or creating folders File numbering is continuous up to 9999, even if you replace a card, create a folder, or switch the target card (as in → ). This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer. Note that file numbering may continue from any existing images in cards or folders that you switch to.
Auto Reset For restarting file numbering from 0001 after switching cards or creating folders File numbering is reset to 0001 if you replace a card, create a folder, or switch the target card (as in → ). This is useful if you want to organize images by cards or folders. Note that file numbering may continue from any existing images in cards or folders that you switch to. If you want to save images with the file numbering starting from 0001, use a newly formatted card each time.
Manual Reset For resetting file numbering to 0001 or starting from 0001 in new folders When you reset the file numbering manually, a new folder is created automatically and the file numbering of images saved to that folder starts from 0001. This is useful, for example, if you want to use different folders for the images taken yesterday and the ones taken today.
File Naming Registering/Changing File Names File names consist of four alphanumeric characters followed by a four-digit file number ( ) and file extension. You can change the first four alphanumeric characters, which by default are unique for each camera and set when the camera is shipped. User setting 1 enables you to register four characters of your choice.
3. Enter letters and numbers of your choice. Enter four characters for User setting 1 or three for User setting 2. By selecting [ ], you can change the input mode. To delete single characters, select [ Use the < > or < > dial or < press < > to enter it. 4. ] or press the < > to select a character, then Exit the setting. Press the < > button, then press [OK]. 862 > button.
5. Select a registered file name. Select [File name], then choose a registered file name. Caution An underscore (“_”) cannot be used as the first character. Note Notes on [User setting2] Shooting after you have selected “*** + image size” (as registered to User setting 2) will add a character representing the current image size to your file name as the fourth character. Meanings of added characters are as follows.
Card Formatting If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera. Caution When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc. before formatting the card. 1. Select [ : Format card]. 2. Select a card. [ ] represents card 1, and [ Select the card.
3. Format the card. Select [OK]. For low-level formatting, press the < > button to add a checkmark [ ] to [Low level format], then select [OK].
Conditions requiring card formatting The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed ( ). Low-level formatting Perform low-level formatting if the card's writing or reading speed seems slow or if you want to totally erase the data on the card. Since low-level formatting will format all recordable sectors on the card, the formatting will take longer than normal formatting.
Auto Rotate You can change the auto rotation setting that straightens images shot in vertical orientation when they are displayed. 1. Select [ : Auto rotate].
2. Select an option. On Automatically rotates images for display on both the camera and computers. On Automatically rotates images only for display on computers. Off Images are not automatically rotated. Caution Images captured with auto rotation set to [Off] will not rotate during playback even if you later set auto rotation to [On]. Note If a picture is taken while the camera is aimed up or down, automatic rotation to the proper orientation for viewing may not be performed correctly.
Adding Orientation Information to Movies For movies recorded with the camera held vertically, orientation information indicating which side is up can be added automatically to enable playback in the same orientation on smartphones or other devices. 1. Select [ : Add 2. Select an option. rotate info]. Enable Play movies on smartphones or other devices in the orientation in which they were recorded.
Caution [Add rotate info] is not available for RAW or MP4 files when the movie recording format is or + . Movies are played horizontally on the camera and via HDMI video output, regardless of this setting.
Date/Time/Zone When you turn on the power for the first time or if the date/time/zone have been reset, follow these steps to set the time zone first. By setting the time zone first, you can simply adjust this setting as needed in the future and the date/time will be updated to match it. Since the captured images will be appended with the shooting date and time information, be sure to set your date/time. 1. Select [ : Date/Time/Zone]. 2. Set the time zone.
Turn the < > dial to select the time zone, then press < If your time zone is not listed, press the < difference from UTC in [Time difference]. >. > button, then set the Turn the < > dial to select a [Time difference] option (+ / − / hour / minute), then press < >. Set by turning the < > dial, then press < >. After entering the time zone or time difference, turn the < >. select [OK], then press < 3. Set the date and time.
4. Set daylight saving time. Set it as necessary. Turn the < > dial to select [ ], then press < >. Turn the < > dial to select [ ], then press < >. When the daylight saving time is set to [ ], the time set in step 3 will advance by 1 hour. If [ ] is set, the daylight saving time will be canceled and the time will go back by 1 hour. 5. Exit the setting. Turn the < > dial to select [OK].
Note Auto power off time may be extended while the [ : Date/Time/Zone] screen is displayed.
Language 1. Select [ : Language 2. Set the desired language. ].
Video System Set the video system of any television used for display. This setting determines the frame rates available when you record movies. 1. Select [ : Video system]. 2. Select an option. For NTSC For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). For PAL For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.).
Help Changing the Help Text Size When [ Help] is displayed, you can display a description of the feature by pressing the < > button. Press it again to exit Help display. To scroll the screen when a scrollbar (1) appears on the right, turn the < > dial.
Example: [ : Multi function lock] < > 878
Changing the Help Text Size 1. Select [ : Help text size]. 2. Select an option.
Beeps 1. Select [ : Beep]. 2. Select an option. Enable The camera beeps after focusing and in response to touch operations. Disable Disables beeping for focus confirmation, self-timer shooting, and touch operations. Note By default, beeping volume for touch operations is set to [0] ( 880 ).
Volume The volume of camera sounds is adjustable. 1. Select [ : Volume]. 2. Set the option. Select an option, then turn the < 881 > dial to adjust the volume.
Headphones 1. Select [ : Headphones]. 2. Select [Volume]. 3. Adjust the volume. Turn the < > dial to adjust the volume, then press < 882 >.
Note You can check sound from the built-in microphone or an external microphone on headphones when [ : Sound recording] is set to an option other than [Disable] and [High Frame Rate] is set to [Disable].
Power Saving You can adjust the timing of when the screen dims and then turns off, when the camera turns off, and when the viewfinder turns off after the camera is left idle (Screen dimmer, Screen off, Auto power off, and Viewfinder off). 1. Select [ : Power saving]. 2. Select an option. Note [Screen dimmer] and [Screen off] apply while the shooting screen is displayed. These settings do not apply during menu display or image playback.
Screen and Viewfinder Display You can specify to use the screen or viewfinder for display, to avoid accidentally activating the viewfinder sensor when the screen is open. 1. Select [ : Screen/viewfinder display]. 2. Select an option. AUTO1: Auto 1 ( : only screen) Always use the screen for display when it is open. Use the screen for display when it is closed and facing you, and switch to the viewfinder when you look through it.
Note You can also switch between viewfinder and screen display by pressing a button you have customized by assigning to switching. With this setting set to [AUTO1] or [AUTO2], the camera responds to the viewfinder sensor accordingly. With [AUTO1] set, the camera does not respond to the viewfinder sensor when the screen is open.
Screen Brightness 1. Select [ : Screen brightness]. 2. Make the adjustment. Referring to the gray image, turn the < > dial to adjust brightness, >. Check the effect on the screen. then press < Note To check the image's exposure, referring to the histogram is recommended ( 887 ).
Viewfinder Brightness 1. 2. Select [ : Viewfinder brightness]. Turn the < > dial and select either [Auto] or [Manual]. Auto Press < >. Check the effect in the viewfinder while shooting. Manual Turn the < > dial to adjust viewfinder brightness, then press < Check the effect in the viewfinder. 888 >.
Screen and Viewfinder Color Tone 1. Select [ : Screen/viewfinder color tone]. 2. Make the adjustment. Turn the < > dial to select an option, then press < 889 >.
Fine-Tuning Viewfinder Color Tone 1. Select [ : Fine-tune VF color tone]. 2. Make the adjustment. Referring to the gray image, use < > for adjustment, then press >. Check the effect in the viewfinder.
UI Magnification You can magnify menu screens by double-tapping with two fingers. Double-tap again to restore the original display size. 1. Select [ : UI magnification]. 2. Select [Enable]. Caution Use camera controls when configuring menu functions with the display magnified. Touch-screen operations are not supported.
HDMI Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. 1. Select [ : HDMI resolution]. 2. Select an option. Auto The images will automatically be displayed at the optimum resolution matching the connected television. 1080p Output at 1080p resolution. Select if you prefer to avoid display or delay issues when the camera switches resolution.
Touch Control 1. Select [ : Touch control]. 2. Select an option. [Sensitive] makes the touch-screen panel more responsive than [Standard]. To disable touch operations, select [Disable]. Caution Precautions for touch-screen panel operations Do not use sharp objects such as fingernails or ballpoint pens for touch operations. Do not use wet fingers for touch operations. If the screen has any moisture or if your fingers are wet, the touch-screen panel may not respond or malfunction may occur.
Multi-Function Lock Specify camera controls to lock when the Multi-function lock is enabled. This can help prevent accidentally changing settings. 1. Select [ : Multi function lock]. 2. Select camera controls to lock. Press < > to add a checkmark [ ]. Select [OK]. Setting the power/multi-function lock switch to < selected [ ] camera controls. > locks the Note An asterisk “*” to the right of [ : Multi function lock] indicates that the default setting has been modified.
Shutter at Shutdown You can set whether to leave the shutter open or close it when the camera's power switch is set to < >. 1. Select [ : Shutter at shutdown]. 2. Select an option. : Closed Closes the shutter. Normally set to closed, to prevent dust from adhering to the sensor when you switch lenses. : Open Leaves the shutter open. This keeps camera quieter when the power switch is set to < > or < >. Useful when you want to shoot quietly.
Sensor Cleaning Cleaning Now Cleaning Automatically Cleaning Manually The camera's sensor cleaning feature cleans the front of the image sensor. Note For best results, clean with the camera in a stable position on a desk or other flat surface. Cleaning Now 1. Select [ : Sensor cleaning].
2. Select [Clean now ]. Select [OK] on the confirmation screen. Note Even if you repeat the sensor cleaning, the result will not improve much. Note that [Clean now ] may not be available immediately after cleaning.
Cleaning Automatically 1. Select [Auto cleaning 2. Select an option. Turn the < ]. > dial to select an option, then press < >. Note When set to [At pwr off] or [Enable], the sensor is cleaned when the screen goes off, including when it has been turned off automatically.
Cleaning Manually Dust that could not be removed by automatic cleaning can be removed manually with a commercially available blower or similar tool. Always use a fully charged battery. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. 1. Select [Clean manually]. 2. Select [OK]. 3. Remove the lens and clean the sensor.
4. End the cleaning. Set the power switch to < >. Note Using the household power outlet accessories (sold separately) is recommended. Caution While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close. These may result in damaging the image sensor and shutter curtains. • Setting the power switch to < >. • Removing or inserting the battery. The surface of the image sensor is extremely delicate. Clean the sensor with care.
App Selection for USB Connections By connecting the camera to a smartphone or computer with the interface cable, you can transfer images via FTP or import images to the smartphone or computer. 1. Select [ : Choose USB connection app]. 2. Select an option. Photo Import/Remote Control Select if you will use EOS Utility after connecting to a computer, or if you will use dedicated Android apps or the iOS version of Photos. Canon app(s) for iPhone Select if you will use dedicated iOS apps.
Resetting the Camera The camera's settings for shooting functions and menu functions can be restored to their defaults. 1. Select [ : Reset camera]. 2. Select an option. Reset individual settings Settings for individual selected options can be reset. Factory reset Resets all settings to defaults. 3. Clear the settings. Select [OK] on the confirmation screen.
Note Still photo Custom shooting modes are reset when [Custom shooting mode (C1C3)] in [Reset individual settings] is selected in still photo shooting mode, and movie Custom shooting modes are reset when this option is selected in movie recording mode.
Custom Shooting Mode (C1–C3) Automatic Update of Registered Settings Canceling Registered Custom Shooting Modes Current camera settings such as shooting, menu, and Custom Function settings can be registered in Custom shooting modes [ ] to [ ]. You can register different functions to use when shooting still photos or movies. 1. Select [ : Custom shooting mode (C1-C3)]. 2. Select [Register settings].
3. Register the desired items. Select the Custom shooting mode to register, then select [OK] on the [Register settings] screen. The current camera settings are registered to Custom shooting mode C*. Automatic Update of Registered Settings If you change a setting while shooting in Custom shooting mode, the mode can be automatically updated with the new setting (Auto update). To enable this automatic update, set [Auto update set.] to [Enable] in step 2.
Canceling Registered Custom Shooting Modes If you select [Clear settings] in step 2, the settings of each mode can be restored to default settings, as they were before registration. Note You can also change shooting and menu settings in Custom shooting modes.
Save/Load Camera Settings on Card Saving Camera Settings Loading Camera Settings Current camera settings such as shooting, menu, and Custom Function settings can be saved to a card as a camera settings file. By loading a camera settings file, you can apply the state of the settings as saved. This enables you to save and apply optimal settings for specific shooting situations, or load settings files on other EOS R3 cameras to use the cameras with the same settings. Saving Camera Settings 1.
3. Select [OK]. (1) Target card The camera settings are saved to the card. To rename the file to an 8-character name of your choice before saving > button on the screen in step 3. it, press the < For instructions, see File Naming. The steps are the same. Caution Camera settings files saved by a camera other than an EOS R3 cannot be loaded on this camera. It may not be possible to load camera settings files that were saved by a camera with a different firmware version.
Loading Camera Settings In step 2 of Saving Camera Settings, select [Load from card] to display up to ten camera settings files on the card. Select a file, and the camera will load it and apply the state of the settings as saved.
Battery Information You can check the conditions of the battery you are using. By registering multiple batteries to the camera, you can check their approximate remaining capacity and usage history. 1. Select [ : Battery info.]. (1) Model of battery or household power source used. (2) Battery level indicator ( increments. ) with the remaining battery level, in 1% (3) The number of shots taken with the current battery. The number is reset when the battery is charged.
Note The shutter count is the number of still photos taken (not including movie recording). If a battery communication error message is displayed, follow the instructions in the message.
Copyright Information Checking the Copyright Information Deleting the Copyright Information When you set the copyright information, it will be recorded to the image as Exif information. Caution If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.]. Note You can also set or check copyright information with EOS Utility (EOS software, ). 1. Select [ : Copyright information]. 2. Select an option.
3. Enter text. Use the < > or < > dial or < press < > to enter it. By selecting [ ], you can change the input mode. To delete single characters, select [ 4. > to select a character, then ] or press the < > button. Exit the setting. Press the < > button, then press [OK]. Checking the Copyright Information When you select [Display copyright info.] in step 2, you can check the [Author] and [Copyright] information that you entered.
Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information.
System Status Display Checking the Error Log Clearing the Camera Status Log You can check the camera's serial number, firmware version, and shutter-release cycles on this screen. You can also check the status log for past errors. Checking camera status with this feature and requesting any required maintenance at a Canon Service Center can reduce camera problems. Checking the Error Log You can check a record of past errors, as well as lens, flash, and battery usage at the time of occurrence. 1.
2. Check the details as needed. Note The camera status log screen lists as many as five recent error records. Older records are automatically deleted. Shutter-release cycles are indicated in units of 1,000. Electronic shutter release is not included in the number of shutterrelease cycles. 3. Check the log as needed. On the screen in step 2, press the < “Err **” indicates error information ( 916 > button. ).
4. Check the details as needed. Turn the < > dial to select an item, then press the < view error details. Turn the < > dial to check details.
Clearing the Camera Status Log To clear all log information displayed, press the < Log.
Other Information Manual/software URL To download instruction manuals, select [ : Manual/software URL] and scan the displayed QR code with a smartphone. You can also use a computer to access the website at the URL displayed and download software. Certification Logo Display Select [ : Certification Logo Display] to display some of the logos of the camera's certifications. Other certification logos can be found on the camera body and packaging.
Custom Functions/My Menu You can fine-tune camera functions and change the functionality of buttons and dials to suit your shooting preferences. You can also add menu items and Custom Functions that you adjust frequently to My Menu tabs.
Tab Menus: Custom Functions Custom Functions 1 (1) Exposure level increments (2) ISO speed setting increments (3) Speed from metering/ISO Auto (4) Bracketing auto cancel (5) Bracketing sequence (6) Number of bracketed shots (7) Safety shift Custom Functions 2 (1) Same expo. for new aperture (2) AE lock meter.
Custom Functions 3 (1) AE Microadjustment (2) FE Microadjustment (3) Limit continuous shot count (4) Restrict drive modes Custom Functions 4 (1) (2) direction to set Tv/Av direction to set Tv/Av (3) Customize buttons (4) Customize dials (5) Clear customized settings 922
Custom Functions 5 (1) switching ( (2) Smart controller / ) (3) Vertical shooting controls Custom Functions 6 (1) Add cropping information (2) Shutter release time lag (3) Audio compression (4) Default Erase option (5) Av setting without lens (6) Release shutter w/o lens 923
Custom Functions 7 (1) Retract lens on power off (2) Add IPTC information Custom Functions 8 (1) Clear all Custom Func. (C.Fn) Selecting [ : Clear all Custom Func. (C.Fn)] clears all Custom Function settings.
Custom Function Setting Items [ 1] [ 2] [ 3] [ 4] [ 5] [ 6] [ 7] [ 8] You can customize camera features on the [ ] tab to suit your shooting preferences. Any settings you change from default values are displayed in blue.
[ 1] Exposure level increments You can specify to use 1/2-stop increments as the increments for shutter speed, aperture value, exposure compensation, AEB, flash exposure compensation, and FEB. 1/3: 1/3-stop 1/2: 1/2-stop Note Display when set to [1/2-stop] is as follows. ISO speed setting increments You can change the manual ISO speed setting increment to a whole stop. 1/3: 1/3-stop 1/1: 1-stop Note Even if [1-stop] is set, ISO speed will be automatically set in 1/3-stop increments when ISO Auto is set.
Speed from metering/ISO Auto You can set the ISO speed status after the metering timer ends in cases where, for ISO Auto operation in [ ]/[ ]/[ ]/[ ]/[ ] mode, the camera has adjusted the ISO speed during metering or during the metering timer. : Restore Auto after metering : Retain speed after metering Bracketing auto cancel You can specify to cancel AEB and white balance bracketing when the power switch is set >.
Number of bracketed shots The number of shots taken with AEB and white balance bracketing can be changed. When [Bracketing sequence] is set to [0, -, +], the bracketed shots will be taken as shown in the following table.
Safety shift If the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, the camera will automatically change the manually selected setting to obtain the standard exposure. [Shutter speed/Aperture] applies to [ ] or [ ] mode. [ISO speed] applies to [ ], [ ], or [ ] mode. OFF: Disable Tv/Av: Shutter speed/Aperture ISO: ISO speed Note Safety shift overrides any changes to [ISO speed range] or [Min. shutter spd.
[ 2] Same expo. for new aperture The maximum aperture value may decrease (the lowest f/number may increase) in [ ] mode (manual exposure shooting) with ISO speed set manually (except when set to ISO Auto) if you (1) Change lenses, (2) Attach an extender, or (3) Use a zoom lens with a variable maximum aperture value. This function prevents the corresponding underexposure by adjusting ISO speed or shutter speed (Tv value) automatically to maintain the same exposure as before (1), (2), or (3).
AE lock meter. mode after focus For each metering mode, you can specify whether to lock the exposure (AE lock) once subjects are in focus with One-Shot AF. The exposure will be locked while you keep pressing the shutter button halfway. Select metering modes for AE lock and add a checkmark [ ]. Select [OK] to register the setting. Restrict shooting modes > button. You can restrict the shooting modes available with the < Select available shooting modes [ / / / / / / / / < > to add a checkmark [ ].
Restrict metering modes You can restrict the metering modes available with the < > button. Select available metering modes [ / / / ], then press < > to add a checkmark [ ]. Select [OK] to register the setting. Caution The [ ] mark cannot be cleared from all four modes at the same time. Metering used in manual exp You can set the metering mode used in [ ] shooting mode. : Specified metering mode The current metering mode is used.
Set shutter speed range You can set the shutter speed range for each [ : Shutter mode] option. In [ ], [ ], or [ ] mode, you can set the shutter speed manually within your specified range. In [ ] and [ ] mode, or in [ ] mode with shutter speed set to [AUTO], the shutter speed is set automatically within your specified range (except for movie recording). Select [OK] to register the setting. Mech shutter/elec 1st-curtain • Lowest speed: Can be set in a range of 30 sec.–1/4000 sec.
[ 3] AE Microadjustment Caution Normally, this adjustment is not required. Perform this adjustment only if necessary. Note that performing this adjustment may prevent you from obtaining suitable exposure. You can fine-tune the standard exposure level. Effective if images in autoexposure shooting without exposure compensation usually seem underexposed or overexposed. OFF: Disable ON: Enable To access the adjustment screen, select [Enable], then press the < > button.
FE Microadjustment Caution Normally, this adjustment is not required. Perform this adjustment only if necessary. Note that performing this adjustment may prevent you from obtaining suitable flash exposure. You can fine-tune the standard flash exposure level. Effective if main subjects in autoflash shooting without flash exposure compensation usually seem underexposed or overexposed. OFF: Disable ON: Enable To access the adjustment screen, select [Enable], then press the < > button.
[ 4] direction to set Tv/Av Dial turning direction when setting the shutter speed and aperture value can be reversed. Reverses the turning direction of the < >, < >, and < > dial in [ ] shooting mode and only the < > dial in other shooting modes. The direction of the < > and < > dial in [ ] mode matches the direction to set exposure compensation with the < > and < > dials in [ ], [ ], and [ ] modes.
Customize buttons You can assign frequently used functions to camera buttons that are easy for you to use. Different functions, for use when shooting still photos or movies, can be assigned to the same button. 1. Select [ 2. Select a camera control. 3. Select a function to assign. : Customize buttons]. Press < > to set it. You can configure advanced settings for functions labeled with [ ] in the lower left of the screen by pressing the < > button.
Note [ : Customize buttons] settings are not cleared even if you select [ : Clear all Custom Func. (C.Fn)]. To clear the settings, select [ : Clear customized settings].
Functions available for customization AF ●: Default ○: Available for customization Function Start/stop tracking Metering and AF start ○ ○ ○ ○ ○ ○ ● ○ ○ ○ ○ ○ ● ○ ○ ○ ○ ○ ○ ○ ○ ● ○ ○ ○ ○ ○ ○ ○ ● ○ ○ ○ ○ ○ AF stop AF point selection Direct AF point selection ○ Direct AF pt sel (during meter) ○ ○ ○ ○ ○ Switch to registered AF point*1 ○ ○ ○ ○ ○ ○ Switch to registered AF func.
One-Shot ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ●*4 AF Servo AF*1 Move AF point by eye control*1 Moving AF point, start AF by eye ctrl*1 ○ Eye control*1 Moving AF pt, meter.
Exposure Compensation ●: Default ○: Available for customization Function ○ AE lock, AF stop ○ ○ Metering start ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ●*3 ○ ○ ○ ○ ○ ○ ○ ○ ○ ●*4 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ AE lock AE lock (hold) AE lock (while button pressed)*1 AE lock/FE lock*1 Release AE Lock ○ Expo comp (hold btn, turn ○ ○ ) ○ ○ ISO speed 941 ○ ○ ○ ○
Set ISO speed(hold btn,turn ○ ○ ○ ○ ○ ○ ○ ) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Flash firing*1 FE lock*1 * 1: Cannot be assigned as a function available in movie recording. * 3: Default in movie recording. * 4: Default in still photo shooting.
Image ●: Default ○: Available for customization Function Image size selection*1 One-touch image quality setting*1 One-touch image quality (hold)*1 Cropping/ aspect ratio*1 Auto Lighting Optimizer White balance Picture Style ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Movies ●: Default ○: Available for customization Function ○ ○ ○ ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Zebra*2 Movie recording Pause Movie Servo AF*2 ○ * 2: Cannot be assigned as a function available in still photo shooting.
Operation 945
●: Default ○: Available for customization Function Flash function settings*1 Dial function settings Cycle between the set functions ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Short press: LCD illumination Long press: LCD info switching ○ Short press: LCD info switching Long press: LCD illumination ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ LCD panel info switching ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Shooting mode settings ○ ● ○ ○ ○ ○ ○ ○ ○ ○ Manual HF
Switch focus/ control ring ○ ○ ○ ○ ○ ○ ○ Switch to Custom shooting mode Depth-offield preview*1 Reset selected item in Fv mode*1 Reset Tv/Av/ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ●*4 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ /ISO in Fv mode*1 Quick Control screen Magnify/ Reduce Image replay Ma
Touch Shutter*1 Create folder*1 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ OVF sim.
Rating button No function (disabled) ○ ○ ○ ○ ○ ○ ● ○ ○ ○ ○ ○ ○ ●*3 ○ ○ ○ ○ ○ ○ ○ * 1: Cannot be assigned as a function available in movie recording. * 3: Default in movie recording. * 4: Default in still photo shooting. Note [ ]: “AF Stop” or “Lens Function” button on super telephoto lenses with Image Stabilizer.
Customize dials Frequently used functions can be assigned to the < 1. Select [ 2. Select a camera control. 3. Select a function to assign. >/< >/< >/< > dials. : Customize dials]. Press < > to set it. You can configure advanced settings for functions labeled with [ ] in the lower left of the screen by pressing the < > button.
Note [ : Customize dials] settings are not cleared even if you select [ : Clear all Custom Func. (C.Fn)]. To clear the settings, select [ : Clear customized settings].
Functions available for dials ●: Default ○: Available for customization Function Select AF area ○ ○ Direct AF point selection ○ ○ ○ AF area (hold metering button) ○ Change shutter speed ○ Change aperture value ○ Exposure compensation ○ ○ ○ Set ISO speed ● ○ ○ Change shutter spd. (hold meter. btn) ○ Change aperture (hold meter. btn) ○ Exposure comp. (hold meter. btn) ● Set ISO speed (hold meter. btn) ○ Flash exp comp (hold meter.
Note The < > dial cannot be customized in [ ] mode. < >: Control ring on RF lenses and mount adapters.
Clear customized settings 1. Select [ 2. Select [OK]. : Clear customized settings]. [Customize buttons] and [Customize dials] are restored to defaults.
[ 5] switching ( / ) You can change the functionality of the still photo shooting/movie recording switch. The movie recording screen is not displayed with this function set to [Silent shutter function switching] or [Disable]. Pressing the movie shooting button starts recording a movie as specified for Custom shooting mode [ ]. : Still photo/movie recording : Silent shutter function switching Setting the still photo shooting/movie recording switch to < shutter function] to [On].
Vertical shooting controls To prevent unintended operations, you can disable vertical shooting controls – buttons, dials, and the Multi-controller and smart controller near the bottom of the camera. ON: On OFF: Off LOCK: Disable using lock > disables the controls. Note that the Setting the multi-function lock switch to < vertical-grip depth-of-field preview button and vertical-grip Multi-function button 2 can still be used.
[ 6] Add cropping information Adding cropping information displays vertical lines for the aspect ratio specified in shooting, so that you can compose shots as if shooting with a medium- or large-format camera (6×6 cm, 4×5 inch, and so on). When you shoot, instead of cropping images recorded to the card, the camera adds aspect ratio information to images for cropping in the Digital Photo Professional (EOS software).
Shutter release time lag Normally, the camera controls shooting so that the shutter-release time lag is consistent, but by setting [Shortened], you can disable this control to shorten the shutter-release time lag. : Standard : Shortened Caution Shutter-release time lag varies by shooting conditions, type of lens, aperture value, and other factors. Audio compression Sets audio compression for movie recording. [Disable] allows higher audio quality than when audio is compressed, but file sizes are larger.
Default Erase option You can set which option is selected by default in the erase menu ( ), which is accessed by pressing the < > button during image playback or during review after shooting. By setting an option other than [Cancel], you can simply press < > to erase images quickly. : [Cancel] selected : [Erase] selected : [Erase ] selected : [Erase non- ] selected Caution Be careful not to erase images accidentally when an option other than [Cancel] is set.
[ 7] Retract lens on power off You can set whether to retract gear-type STM lenses (such as RF35mm F1.8 Macro IS STM) automatically when the camera's power switch is set to < >. ON: Enable OFF: Disable Caution With auto power off, the lens will not retract regardless of the setting. Before detaching the lens, make sure that it is retracted. Note When [Enable] is set, this function takes effect regardless of the lens's focus mode switch setting (AF or MF).
Note During playback, you can check whether IPTC information was added. You can use Digital Photo Professional (EOS software) to check IPTC information in images. IPTC information registered to the camera is not erased if you select [ : Clear all Custom Func. (C.Fn)] ( ), but the setting changes to [Disable].
[ 8] Clear all Custom Func. (C.Fn) Selecting [ : Clear all Custom Func. (C.Fn)] clears all Custom Function settings except the following functions. Customize buttons Customize dials switching ( / ) Smart controller Note To clear settings configured with [ : Customize buttons] and [ : Customize dials], select [ : Clear customized settings]. Settings for [ : AE Microadjustment] and [ : FE Microadjustment] are set to [Disable] but not cleared when [ : Clear all Custom Func. (C.Fn)] is performed.
Tab Menus: My Menu (1) Add My Menu tab (2) Delete all My Menu tabs (3) Delete all items (4) Menu display 963
Registering My Menu Creating and Adding My Menu Tabs Registering Menu Items on My Menu Tabs My Menu Tab Settings Deleting All My Menu Tabs/Deleting All Items Menu Display Settings On the My Menu tab, you can register menu items and Custom Functions you often adjust. Creating and Adding My Menu Tabs 1. Select [Add My Menu tab]. 2. Select [OK]. You can create up to five My Menu tabs by repeating steps 1 and 2.
Registering Menu Items on My Menu Tabs 1. Select [MY MENU*: Configure]. 2. Select [Select items to register]. 3. Register the desired items. Select an item, then press < >. Select [OK] on the confirmation screen. You can register up to six items. To return to the screen in step 2, press the < 965 > button.
My Menu Tab Settings You can sort and delete items on the menu tab, and rename or delete the menu tab itself. Sort registered items You can change the order of the registered items in My Menu. Select [Sort registered items], select an item to rearrange, then press < >. With [ ] displayed, turn the > dial to rearrange the item, then press < >. < Delete selected items/Delete all items on tab You can delete any of the registered items.
Rename tab You can rename the My Menu tab from [MY MENU*]. 1. Select [Rename tab]. 2. Enter text. Use the < > or < > dial or < > to enter it. press < By selecting [ ], you can change the input mode. To delete single characters, select [ 3. > to select a character, then ] or press the < Confirm input. Press the < > button, then select [OK]. 967 > button.
Deleting All My Menu Tabs/Deleting All Items You can delete all the created My Menu tabs or My Menu items registered on them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [ ] tab will revert to its default. Delete all items You can delete all the items registered under the [MY MENU1] to [MY MENU5] tabs. The tabs themselves will remain.
Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the < > button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [ ] tab selected. Display only My Menu tab Restricts display to the [ ] tab ([ ]/[ ]/[ 969 ]/[ ]/[ ]/[ ] tabs are not displayed).
Reference This chapter provides reference information on camera features.
Importing Images to a Computer Connecting to a Computer with an Interface Cable Using a Card Reader Connecting to a Computer via Wi-Fi You can use EOS software to import images from the camera to a computer. There are three ways to do this. If you will import many images, consider using a household power outlet accessory (sold separately). Connecting to a Computer with an Interface Cable 1. Install EOS Utility ( 2. Connect the camera to the computer. ).
Using a Card Reader You can use a card reader to import images to a computer. 1. Install Digital Photo Professional ( 2. Insert the card into the card reader. 3. Use Digital Photo Professional to import the images. ). Refer to the Digital Photo Professional Instruction Manual. Note When downloading images from the camera to a computer with a card reader without using EOS software, copy the DCIM folder on the card to the computer.
Connecting to a Computer via Wi-Fi You can connect the camera to the computer via Wi-Fi and import images to the computer ( ). Note By connecting to an FTP server, you can send images on the camera to a computer ( ).
Using an Optional USB Power Adapter to Charge the Camera Using USB Power Adapter PD-E1 (sold separately), you can charge Battery Pack LP-E19 without removing it from the camera. 1. Connect the USB power adapter. With the camera power switch set to < >, insert the USB power adapter plug fully into the < > terminal.
2. Connect the power cord. Connect the power cord to the USB power adapter and plug the other end into a power outlet. Charging begins, and the access lamp (1) is lit in green. [ ] is displayed on the LCD panel. When charging is finished, the access lamp turns off. Caution To protect the battery pack and keep it in optimal condition, do not charge it continuously for more than 24 hours. Charged batteries gradually lose their charge, even when they are not used.
Troubleshooting Guide Power-related problems Shooting-related problems Problems with wireless features Operation problems Display problems Playback problems Sensor cleaning problems Computer connection problems Problems with the multi-function shoe If a problem occurs with the camera, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, take the camera to the nearest Canon Service Center.
Batteries cannot be charged with the USB power adapter (sold separately). Batteries are not charged while the camera power switch is set to < batteries are charged during auto power off. Operating the camera will stop charging in progress. >. However, The access lamp blinks during charging with the USB power adapter. In case of charging problems, the access lamp blinks in green and a protective circuit stops charging.
[Does this battery/do these batteries display the Canon logo?] is displayed. Do not use any battery packs other than a genuine Canon Battery Pack LP-E19. Remove and install the battery again ( ). If the electrical contacts are dirty, use a soft cloth to clean them. The battery becomes exhausted quickly. Use a fully charged battery ( ). The battery performance may have degraded. See [ : Battery info.] to check the battery recharge performance level ( ).
Shooting-related problems The lens cannot be attached. To attach EF or EF-S lenses, you will need a mount adapter. The camera cannot be used with EF-M lenses ( ). No images can be shot or recorded. Make sure the card is properly inserted ( ). Slide the card's write-protect switch to the Write/Erase setting ( ). If the card is full, replace the card or delete unnecessary images to make space ( , ). Shooting is not possible if the AF point turns orange when you attempt to focus.
The continuous shooting speed is slow. High-speed continuous shooting may be slower depending on the battery level, ambient temperature, flicker reduction, shutter speed, aperture value, subject conditions, brightness, AF operation, type of lens, use of flash, shooting settings, and other conditions. For details, see Selecting the Drive Mode or Still photo file size / Number of possible shots / Maximum burst for continuous shooting. The maximum burst during continuous shooting is lower.
Expanded ISO speeds cannot be selected for still photo shooting. Expanded ISO speeds are not available when [ : Highlight tone priority] is set to [Enable] or [Enhanced]. Expanded ISO speeds are not available when [ : HDR shooting ] is set to [Enable]. Check the [ISO speed range] setting under [ : ISO speed settings]. Even if I set a decreased exposure compensation, the image comes out bright. Set [ : Auto Lighting Optimizer] to [Disable] ( ).
The flash always fires at full output. Flash units other than EL/EX series Speedlites used in autoflash mode always fire at full output ( ). When the flash Custom Function setting for [Flash metering mode] is set to [TTL flash metering] (autoflash), the flash will always fire at full output ( ). Flash exposure compensation cannot be set. If flash exposure compensation is already set with the Speedlite, flash exposure compensation cannot be set with the camera.
Movie recording stops by itself. If the card's writing speed is slow, movie recording may stop automatically. For details on cards that can record movies, see Card performance requirements. To find out the card's writing speed, refer to the card manufacturer's website, etc. Perform low-level formatting to initialize the card if the card's writing or reading speed seems slow ( ). Movie recording stops automatically if you record a high frame rate movie for 89 min. 29 sec.
The subject looks distorted during movie recording. If you move the camera to the left or right (panning) or shoot a moving subject, the image may look distorted. Sound is not recorded in movies. Sound is not recorded in High Frame Rate movies. A time code is not added. Time codes are not added when you record High Frame Rate movies with [Count up] in [ : Time code] set to [Free run] ( ). Additionally, no time code is added to HDMI video output ( ). Time codes advance faster than the actual time.
Problems with wireless features Cannot pair with a smartphone. Use a smartphone compliant with Bluetooth Specification Version 4.1 or later. Turn on Bluetooth from the smartphone settings screen. Pairing with the camera is not possible from the smartphone's Bluetooth settings screen. Install the dedicated app Camera Connect (free of charge) on the smartphone ( ). Pairing with a previously paired smartphone is not possible if pairing information registered for another camera remains on the smartphone.
Operation problems Settings change when I switch from still photo shooting to movie recording or vice versa. Separate settings are retained for use when shooting still photos and recording movies. >, < Settings cannot be changed with < < >, or < >. Set the power/multi-function lock switch to < ( ). Check the [ : Multi function lock] setting ( : >, < >, > and release the multi-function lock ). Smart controller] to [Enable] or [Disable vertical Settings cannot be changed with < vertical shooting.
Display problems The menu screen shows fewer tabs and items. Tabs and items on the menu screen vary for still photos and movies. The display starts with [ ] My Menu, or the [ ] tab alone is displayed. [Menu display] on the [ ] tab is set to [Display from My Menu tab] or [Display only My Menu tab]. Set [Normal display] ( ). The file name's first character is an underscore (“_”). Set [ : Color space] to [sRGB]. If [Adobe RGB] is set, the first character will be an underscore ( ).
The screen does not display a clear image. If the screen is dirty, use a soft cloth to clean it. The screen display may seem slightly slow in low temperatures or may look black in high temperatures, but it will return to normal at room temperature.
Playback problems Part of the image blinks in black. [ : Highlight alert] is set to [Enable] ( ). A red box is displayed on the image. [ : AF point disp.] is set to [Enable] ( ). During image playback, the AF points are not displayed. AF points are not displayed when the following types of images are played back: • Images taken with Multi Shot Noise Reduction applied. • Cropped images. • Images from HDR shooting with [Auto Image Align] set to [Enable]. The image cannot be erased.
Movie playback stops by itself. Extended movie playback or movie playback under high ambient temperature may cause the camera's internal temperature to rise, and movie playback may stop automatically. If this happens, playback is disabled until the camera's internal temperature decreases, so turn off the power and let the camera cool down a while. The movie appears to freeze momentarily.
Images cannot be resized or cropped. This camera cannot resize JPEG images, RAW images, or frame-grab images from 4K movies saved as still photos ( ). This camera cannot crop RAW images or frame-grab images from 4K movies saved as still photos ( ). Dots of light appear on the image. White, red, or blue dots of light may appear in captured images if the sensor is affected by cosmic rays or similar factors. Their appearance may be reduced by performing [Clean now ] under [ : Sensor cleaning] ( ).
Sensor cleaning problems The shutter makes a sound during sensor cleaning. Although there is a mechanical sound from the shutter during cleaning after [Clean now ] is selected, no image is recorded to the card ( ). Automatic sensor cleaning does not work. Repeatedly turning the power switch < > and < prevent the [ ] icon from being displayed ( ).
Computer connection problems I cannot import images to a computer. Install EOS Utility (EOS software) on the computer ( ). Make sure the main EOS Utility window is displayed. Check the version of the application. Problems with the multi-function shoe A message was displayed on the screen when I attached an accessory. If [Communication error Reattach accessory] is displayed, reattach the accessory.
Error Codes (1) Error number (2) Cause and countermeasures If there is a problem with the camera, an error message will appear. Follow the on-screen instructions. If the problem persists, write down the error code (Err xx) and request service.
ISO Speed in Movie Recording In [ ], [ ], and [ ] mode ISO speed is set automatically in a range of ISO 100–25600. Setting [Max for Auto] in [ : ISO speed settings] to [H(204800)] ( ) expands the maximum speed in the automatic setting range to H (equivalent to ISO 204800). The minimum speed in the automatic setting range is ISO 200 when [ : Highlight tone priority] is set to [Enable] or [Enhanced] ( ). The maximum limit is not expanded, even when expansion is set in [Max for Auto].
Information Display LCD Panel Still Photo Shooting Screen Movie Recording Screen Playback Screen LCD Panel Still photo/movie standby screen 1 (1) Eye control (2) Shooting mode (3) Battery level (4) Flash exposure compensation (5) Exposure compensation (6) Bluetooth function (7) Wi-Fi /wired LAN (8) Shutter speed (9) Aperture value (10) Exposure level indicator/Exposure compensation amount/AEB range (11) ISO speed (12) Highlight tone priority 996
Still photo/movie standby screen 2 (1) AF area (2) Drive mode (3) AF operation (4) Metering mode (5) Card slot (6) Movie recording mode (7) White balance (8) Picture Style (9) Movie recording size (10) Movie recording format 997
Movie standby screen 3 (1) AF area (2) Image Stabilizer (IS mode) (3) Card slot (4) White balance (5) Picture Style/Canon Log (6) Movie recording time available 998
Movie recording in progress (1) Movie recording mode (2) Battery level (3) Recording in progress/External recording in progress (10-bit, via HDMI) (4) Elapsed recording time 999
Still Photo Shooting Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied.
(1) Maximum burst (2) Number of available shots/Sec. until self-timer shoots (3) Focus bracketing/HDR/Multiple exposures/Multi Shot Noise Reduction/Bulb timer/Interval timer (4) Shooting mode (5) AF area (6) AF operation (7) Card (8) Image quality (9) Drive mode (10) Metering mode (11) Accessory compatible with the multi-function shoe attached (12) No.
(30) AEB/FEB (31) View Assist (32) HDR PQ (33) Flash ready/FE lock/High-speed sync (34) Electronic shutter (35) Touch Shutter/Create folder (36) AE lock (37) Shutter speed/Multi-function lock warning (38) Aperture value (39) Overheating warning (40) Still photo image quality warning (41) Focal length (42) Display simulation (43) Magnify button (44) ISO speed (45) Highlight tone priority (46) Exposure compensation (47) Exposure level indicator 1002
Note You can specify the information displayed in response to pressing the < > button ( ). The electronic level is not displayed when the camera is connected via HDMI to a television. Other icons may be displayed temporarily after setting adjustments.
Movie Recording Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied.
(1) Battery level (2) Movie recording time available/Elapsed recording time (3) Shooting mode (4) Image Stabilizer (IS mode) (5) AF area (6) Audio recording level indicator (manual input) (7) Movie recording size (8) Audio recording level (manual input) (9) Headphone volume (10) HDR movie (11) Movie Servo AF (12) Electronic level (13) AF point (Flexible Zone AF 1) (14) Histogram (Brightness/RGB) (15) Set AF point to center (16) Quick Control button (17) [ ] Movie shooting bu
(27) Overheat control (28) Movie self-timer (29) AE lock (30) Shutter speed (31) Aperture value (32) Canon Log (33) Overheating (34) Overheating warning (35) Focal length (36) ISO speed (37) Highlight tone priority (38) Exposure compensation (39) Exposure level indicator (metering levels) Caution You can specify the information displayed in response to pressing the < > button ( ). The electronic level is not displayed when the camera is connected via HDMI to a television.
Note Other icons may be displayed temporarily after setting adjustments.
Playback Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied.
(1) HDR View Assist (2) Bluetooth function (3) Wi-Fi signal strength (4) Wi-Fi function (5) Battery level (6) Current image no./Total images/No. of images found (7) Shutter speed (8) Aperture value (9) Exposure compensation amount (10) Already sent to a computer/smartphone (11) Voice memo (12) Rating (13) Image protection (14) Card no. (15) Folder no.-File no.
Detailed information display for still photos (1) Aperture value (2) Picture Style/Canon Log/Settings (3) Shutter speed (4) White balance correction/Bracketing (5) Shooting mode/Multiple exposure/Frame Grab (6) White balance (7) Auto Lighting Optimizer (8) First image of scene (9) Image quality/Edited image/Cropping (10) Exposure compensation amount (11) Shooting date and time (12) Histogram (Brightness/RGB) (13) Scroll bar (14) ISO speed (15) Highlight tone priority (16) Met
*[ *[ *[ ] indicates images processed with Multi Shot Noise Reduction. ] indicates images created and saved by performing RAW image processing, resizing, cropping, or frame-grabbing. ] indicates images cropped and then saved.
Detailed information display for movies (1) Movie playback (2) Movie recording mode (3) High Frame Rate (4) Movie recording size (5) Video frame rate (6) Movie compression method (7) Movie orientation information (8) Recording time/Time code * For simplicity, explanations are omitted for items that are also included in Basic information display for still photos and Detailed information display for still photos, which are not shown here.
Specifications Type Type: Digital single-lens non-reflex AF/AE camera Lens mount: Canon RF mount Compatible lenses: Canon RF lens group * Using mount adapter EF-EOS R: Canon EF or EF-S lenses (excluding EF-M lenses) Lens focal length: Same as the focal length indicated on the lens * Using EF-S lenses: Approx. 1.6 times the indicated focal length Image sensor Type: Full-frame back-illuminated stacked CMOS sensor Effective pixels*1*2 Max. approx. 24.1 megapixels Total pixels*1 Approx. 26.
Still photo recording Still photo pixel count Resolution (Pixels) Aspect ratio Image size 3:2 1.6× (crop)*1 1:1 4:3 16:9 L 24.0 megapixels (6000 × 4000) Approx. 9.3 megapixels (3744 × 2496) 16.0 megapixels (4000 × 4000) Approx. 21.3 megapixels*2 (5328 × 4000) Approx. 20.2 megapixels*2 (6000 × 3368) M Approx. 10.6 megapixels (3984 × 2656) Approx. 7.1 megapixels (2656 × 2656) Approx. 9.5 megapixels (3552 × 2664) Approx. 8.9 megapixels*2 (3984 × 2240) S1 Approx. 5.
Still photo file size / Number of shots available / Maximum burst for continuous shooting When using the electronic shutter Image quality File size [Approx. MB] Available shots [Approx.]*1 Maximum burst [Approx.] CFexpress card*1 SD card*2 SD card*3 [Hispeed] 530 L 8.7 37560 540 410 M 4.7 67860 530 530 530 S1 3.2 99010 530 530 530 S2 1.9 163960 530 530 530 L 8.1 34800 460 420 450 JPEG*4 M 4.7 59400 580 560 560 S1 3.4 85030 590 560 560 HEIF*5 S2 1.
When using the mechanical shutter/electronic first-curtain File size [Approx. MB] Image quality Available shots [Approx.]*1 Maximum burst [Approx.
Movie recording Movie recording format: MP4, RAW Estimated recording time, movie bit rate, and file size Canon Log 3: Off, HDR PQ: Off Total recording time (Approx.) Movie recording size 64 GB File size (Approx. MB/min.) 3 min. 13 min. 50 min. 2600 18728 RAW (Light) 4 min. 18 min. 1 hr. 13 min. 1800 13006 29.97 fps 25.00 fps RAW (Standard) 4 min. 16 min. 1 hr. 6 min. 2000 14376 24.00 fps 23.98 fps RAW (Standard) 5 min. 21 min. 1 hr. 22 min. 1600 11503 29.97 fps 25.
ALL-I 59.94 fps 50.00 fps 4K UHD 29.97 fps 25.00 fps 23.98 fps 119.88 fps 100.00 fps 59.94 fps 50.00 fps Full HD 29.97 fps 25.00 fps 23.98 fps 119.88 fps 100.00 fps 36 min. 2 hr. 21 min. 36 min. 2 hr. 27 min. 1 hr. 10 min. 4 hr. 40 min. 18 min. IPB (Standard) IPB (Light) IPB (Standard) IPB (Light) ALL-I 9 min. 940 6734 9 hr. 35 min. 230 1656 18 hr. 17 min. 120 869 1 hr. 12 min. 4 hr. 42 min. 470 3373 1 hr. 10 min. 4 hr. 40 min. 18 hr. 17 min. 120 869 2 hr. 18 min. 9 hr.
Canon Log 3: On, or HDR PQ: On 64 GB 256 GB 1 TB Movie bit rate (Approx. Mbps) RAW (Standard) 3 min. 13 min. 50 min. 2600 18728 Total recording time (Approx.) Movie recording size 59.94 fps 50.00 fps 6K RAW RAW (Light) 4 min. 18 min. 1 hr. 13 min. 1800 13006 29.97 fps 25.00 fps RAW (Standard) 4 min. 16 min. 1 hr. 6 min. 2000 14376 24.00 fps 23.98 fps RAW (Standard) 5 min. 21 min. 1 hr. 22 min. 1600 11503 29.97 fps 25.00 fps RAW (Light) 9 min. 37 min. 2 hr. 26 min.
ALL-I 59.94 fps 50.00 fps Full HD 29.97 fps 25.00 fps 23.98 fps 119.88 fps 100.00 fps 2 hr. 27 min. 9 hr. 35 min. 1 hr. 33 min. 6 hr. 12 min. 24 hr. 16 min. 90 655 2 hr. 45 min. 11 hr. 2 min. 43 hr. 7 min. 50 369 1 hr. 2 min. 4 hr. 9 min. 16 hr. 16 min. 135 977 IPB (Standard) 3 hr. 3 min. 12 hr. 13 min. 47 hr. 45 min. 45 333 IPB (Light) 5 hr. 1 min. 20 hr. 7 min. 78 hr. 37 min. 28 202 ALL-I 18 min. 1 hr. 12 min. 4 hr. 43 min.
Card performance requirements (Movie recording) [Write/Read speed] CFexpress card SD card Movie recording size 8 bit / 10 bit 59.94 fps 50.00 fps 6K RAW 8 bit 10 bit UHS Speed Class 3 or higher Video Speed Class V60 or higher RAW (Standard) RAW (Light) 29.97 fps 25.00 fps RAW (Standard) 24.00 fps 23.98 fps RAW (Standard) 29.97 fps 25.00 fps RAW (Light) 24.00 fps 23.98 fps RAW (Light) 59.94 fps 50.00 fps IPB (Standard) CFexpress 2.0 Type-B [400 MB/s or higher] CFexpress 2.
Built-in and external microphones Built-in microphone: Monaural microphone External microphone: Connected to the multi-function shoe or 3.
Focusing brightness range (still photos): EV –7.5 to 20 (with an f/1.2 lens,* center AF point, and One-Shot AF, at room temperature, and ISO 100) * Except RF lenses with a Defocus Smoothing (DS) coating Focusing brightness range (movies): EV –4.5 to 20 (with an f/1.2 lens,* center AF point, and One-Shot AF, at room temperature, ISO 100, and 29.97 fps) * Except RF lenses with a Defocus Smoothing (DS) coating Eye control The feature can be used in still photo shooting but not movie recording.
Exposure control Metering functions under various shooting conditions Item Movie recording Fv / P / Tv / Av / M / BULB / C1 / C2 / C3 Shooting mode Evaluative metering Partial metering Metering mode Still photo shooting 384-zone (24×16) metering using image sensor output signals*1 Metering sensor Spot metering Center-weighted average metering Metering brightness range (at room temperature, ISO 100) P / Tv / Av / M / C1 / C2 / C3 ○ ○ * When faces are detected ○ * Approx. 5.
ISO Auto details for still photos Shooting mode No flash Using flash P Tv ISO 100*1, *2–102400*2 ISO 100*1, *2–6400*2, *3 ISO 400*4 ISO 400*4 Av M BULB * 1: ISO 200 when set to [Highlight tone priority: Enable/Enhanced]. * 2: Varies depending on the [Maximum] and [Minimum] settings for [Auto range]. * 3: ISO 1600 when using a lens that is not compatible with “Variable control of maximum ISO Auto limit for E-TTL”. * 4: If outside the setting range, changed to the value most close to ISO 400.
Automatic ISO speed setting for movies (in P / Tv / Av mode, and in M mode with ISO Auto) Canon Log 3 Normal ISO speed Expanded ISO speed ISO speed Off ISO 100–25600 (in 1/3 or 1-stop increments) On ISO 800–25600 (in 1/3 or 1-stop increments) Off H (equivalent to ISO 32000, 40000, 51200, 64000, 80000, or 102400) On * Maximum ISO speed when set automatically corresponds to the [Max for Auto] setting. * When set to [Highlight tone priority], the setting range is ISO 200–25600.
Shutter Still photo shooting Type: Rolling shutter, using the image sensor Electronically controlled focal-plane shutter Shutter mode: Mechanical shutter / Electronic 1st-curtain / Electronic shutter Shutter speed Mechanical shutter / Electronic 1stcurtain 1/8000 to 30 sec. (in 1/3 or 1/2-stop increments), bulb exposures Electronic shutter 1/64000 sec., 1/32000 sec., 1/16000 sec., 1/12800 sec., 1/10000 sec., or 1/8000 sec. to 30 sec.
Image stabilization (IS mode): Provided Drive Drive mode and continuous shooting speed Drive modes AF operation Mechanical shutter Single shooting Electronic 1st curtain Electronic shutter ○ ○ ○ Max. approx. 12 shots/sec. Max. approx. 12 shots/sec. Max. approx. 30 shots/sec. Max. approx. 6.0 shots/sec. Max. approx. 8.0 shots/sec. Max. approx. 15 shots/sec. Max. approx. 3.0 shots/sec. Max. approx. 3.0 shots/sec. Max. approx. 3.0 shots/sec. Self-timer: 10 sec.
Frame grab from 4K movies Individual frames in 4K movies recorded with the camera can be saved as JPEG or HEIF still photos. DCI Approx. 8.8 megapixels (4096 × 2160) UHD Approx. 8.3 megapixels (3840 × 2160) 4K * Frame grab is not available for RAW movies or Canon Log 3 movies. * From normal movies, still photos are saved as JPEGs, and from HDR PQ movies, as HEIF images. * Frame grabbing from 4K ALL-I, IPB (Std), and IPB (Light) is supported.
Power source Battery Compatible battery packs LP-E19 Quantity used 1 USB charging: Using USB Power Adapter PD-E1 AC power source AC adapter AC-E19 DC coupler DR-E19 Number of shots available Available shots (Approx.) Shooting method Temperature Power saving Viewfinder Smooth 620 440 860 760 +23°C / 73°F Screen * Using a new, fully charged LP-E19 and recording to an SD card, based on CIPA guidelines.
Battery information Remaining capacity In 1% increments 5-level indicator Number of shots Supported Recharge performance 3 levels Dimensions and weight Dimensions (W) × (H) × (D) Approx. 150.0 × 142.6 × 87.2 mm (W) × (H) × (D) Approx. 5.91 × 5.61 × 3.43 in. * Based on CIPA guidelines. Weight Body (including battery and CFexpress card) * Based on CIPA guidelines. Body only Approx. 1015 g Approx. 35.80 oz. Approx. 822 g Approx. 29.00 oz.
GPS Position data Latitude, longitude, elevation, and Coordinated Universal Time (UTC) Position update interval Every sec. / Every 5 sec. / Every 10 sec. / Every 15 sec. / Every 30 sec. / Every min. / Every 2 min. / Every 5 min. Supports the following GPS signals • American GPS satellites Supported GPS signals • Russian GLONASS satellites • Japanese MICHIBIKI Quasi-Zenith Satellites * Error correction functions using multiple MICHIBIKI satellites are not supported.
Wi-Fi (Wireless LAN) communication Supporting standards (Equivalent to IEEE 802.11b/g/n/a/ac standards) Wi-Fi standard Transmission method Maximum link speed IEEE 802.11b DS-SS modulation 11 Mbps IEEE 802.11g 54 Mbps IEEE 802.11n 72.2 Mbps OFDM modulation IEEE 802.11a 54 Mbps IEEE 802.11ac 86.7 / 200 / 433.3 Mbps Transmission frequency (Center frequency) 2.
Bluetooth Standards compliance: Bluetooth Specification Version 5.0 compliant (Bluetooth Low Energy technology) Transmission method: GFSK modulation All data above is based on Canon testing standards and CIPA (Camera & Imaging Products Association) testing standards and guidelines. Dimensions and weight listed above are based on CIPA Guidelines (except weight for camera body only). Product specifications and appearance are subject to change without notice.
Trademarks and Licensing Trademarks About MPEG-4 Licensing Accessories Trademarks Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. App Store and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. Google Play and Android are trademarks of Google LLC. IOS is a trademark or registered trademark of Cisco in the U.S.
About MPEG-4 Licensing “This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.
Accessories Use of genuine Canon accessories is recommended This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery).