User manual

Note
[ ] blinks in the lower left of the screen during AEB.
If the drive mode is set to [ ], press the shutter button three times for each shot.
In [ ], [ ], or [ ] mode, holding down the shutter button completely captures
three images, one after another, before the camera automatically stops shooting.
When [ ] or [ ] is set, three consecutive shots are captured after a delay of 10
or 2 sec.
You can set AEB in combination with exposure compensation.
AEB is not available in flash photography or bulb exposures, or when set to Multi
Shot Noise Reduction, HDR mode, or focus bracketing.
AEB will be canceled automatically if you do any of the following: Setting the power
switch to <
> or when the flash is fully charged.
164