User manual

3.
Focus and take the picture.
Aim the AF point over the subject and press the shutter button halfway.
When focus is achieved, the AF point turns blue.
If focus is not achieved, the AF point will turn orange.
Caution
The camera will keep moving the AF point [ ] to track subjects when set to
Flexible Zone AF and Servo AF, but under some shooting conditions (such as
when subjects are small), it may not be possible to track the subject.
Focusing may be difficult when using a peripheral AF point. In this case, select an
AF point in the center.
Tapping the screen to focus will focus with [One-Shot AF], regardless of the AF
operation setting.
Note
You can set AF areas and AF points when [ : Orientation linked AF point] is
set to [Separate AF pts: Area+pt] ( ).
439