User manual

Manual Setting

Check on the screen for image areas affected by light sources that flicker at high

frequencies, then find a suitable shutter speed.

Select [Manual setting].

Adjust the shutter speed.

Do the following if banding is not eliminated at the shutter speed set

with automatic detection.

• Turn the < > dial. With the < > dial, you can increase the

shutter speed set with automatic detection (×2, ×3, ×4, and so on)

or decrease it (1/2×, 1/3×, 1/4×, and so on).

• Turn the < > dial to fine-tune the setting.

If this does not eliminate banding, rotate the camera about 90° or

switch to automatic detection in other ways.

Take the picture.

209