User manual

Quick Flash Group Control
As you view the shooting screen in wireless multi-flash photography, you can configure the
settings for each flash group by pressing the button assigned to [Quick flash group
control] in [ : Customize buttons]. This example is based on assigning the < >
button ( ).
1.
Set the flash firing mode to < > (individual group control) to
prepare for wireless multi-flash photography.
For details, refer to the instruction manuals of flash units supporting
wireless multi-flash photography.
2.
During standby, press the < > button.
A setting screen for each flash group is displayed.
Turn the < > dial to select a flash group (A–E) to configure.
Turn the < > dial to set the flash mode.
Turn the < > dial to adjust flash output or flash exposure
compensation.
Note
The [Quick flash group control] setting screen can be displayed in <
Fv>, <P>,
<Tv>, <Av>, <M>, or <B> mode.
When Speedlites are set to a flash mode other than < > (individual group
control), pressing the < > button displays the [Flash function settings]
screen.
215