User manual

3.
Aim the camera at the subject.
A tracking frame is displayed around their eye.
To choose an eye to focus on when [ : AF area] is set to [Whole
area AF], either tap the screen or use < >. As you use < >, the
tracking frame changes again to [ ].
You can also tap the screen to choose an eye, when [ : AF area] is
set to [Whole area AF] or during tracking in progress.
If your selected eye is not detected, an eye to focus on is selected
automatically.
4.
Take the picture.
Caution
Depending on the subject and shooting conditions, subject eyes may not be
detected correctly, or a subject's left or right eye may not be prioritized correctly.
Eyes are not detected when [ : Subject to detect] is set to [None].
Note
In [ : L/R eye detection], you can limit the available detection setting options to
your preferred options.
490