User manual

3.
Focus and shoot/record.
Aim the AF point over the subject and press the shutter button halfway.
Once the subject is in focus, the AF point turns green and the camera
beeps.
If the camera cannot focus, the AF point turns orange.
Caution
The camera will keep moving the AF point [ ] to track subjects when set to
Flexible Zone AF and Servo AF, but under some shooting conditions (such as
when subjects are small), it may not be possible to track the subject.
Focusing may be difficult when using a peripheral AF point. In this case, select an
AF point in the center.
Tapping the screen to focus will focus with [One-Shot AF], regardless of the AF
operation setting.
Note
You can set separate AF areas and AF points for vertical and horizontal
orientations when [ : Orientation linked AF point] is set to [Separate AF pts:
Area+pt] ( ).
496