User manual

Labeling Batteries with Serial Numbers
It is convenient to label registered
LP-E6NH
/LP-E6N/LP-E6 battery packs with their serial
numbers, using commercially available labels.
1
.
On a label approx. 25×15 mm, write the serial number (1).
2.
Apply the label.
Set the power switch to < >.
Remove the battery from the camera.
Apply the label as shown in the illustration (on the side with no
electrical contacts).
Caution
Do not apply the label on any part other than as shown in the illustration in step 2.
Otherwise, the misplaced label may make it difficult to insert the battery or
impossible to turn on the power.
852