User manual

ISO Auto details for still photos
Shooting mode
No flash
Using flash
Variable control of maximum ISO Auto limit
for E-TTL
Compatible lens Incompatible lens
Creative Zone
/ / /
/
ISO 100*
1
*
2
–
102400*
2
ISO 100*
1
*
2
–6400*
2
ISO 100*
1
*
2
–1600*
2
ISO 400*
3
ISO 400*
3
Basic Zone
/
ISO 100–25600 ISO 100–6400 ISO 100–1600
Varies by shooting mode
Varies by shooting mode
* 1: ISO 200 when set to [Highlight tone priority: Enable/Enhanced].
* 2: Varies depending on the [Maximum] and [Minimum
] settings for [Auto range].
* 3: If outside the setting range, changed to the value closest to ISO 400.
Variable control of maximum ISO Auto limit for E-TTL: Supported
ISO speed (recommended exposure index) in movie recording
Manual ISO speed setting for movies (in M mode)
Canon Log 3 ISO speed
Normal ISO speed
Off
ISO 100–25600 (in 1/3- or 1-stop
increments)
On
ISO 800–25600 (in 1/3- or 1-stop
increments)
Expanded ISO speed*
1
Off
H (equivalent to ISO 32000, 40000,
51200, 64000, 80000, or 102400)
On
L (equivalent to ISO 100, 125, 160,
200, 250, 320, 400, 500, or 640)
H (equivalent to ISO 32000, 40000,
51200, 64000, 80000, or 102400)
* 1: When set to 4K 59.94p/50.00p, maximum expanded ISO speed is equivalent to ISO 51200.
* Maximum ISO speed when set manually corresponds to the [ISO speed range] setting.
* The lower end of the ISO speed range starts at ISO 200 when the camera is set to [Highlight tone
priority].
* Expanded ISO speeds are not available in HDR or HDR PQ movie recording, in movie recording with
shooting creative filters, or with digital zoom.
* The default setting range when set to Canon Log 3 is L and ISO 800–25600.
926