User manual

107
 The effective range of the AF-assist beam emitted by the built-in ash is
approx. 4 meters/13.1 feet.
 The AF-assist beam is red as needed when the built-in ash has been
raised. To prevent it from ring, set [z: AF-assist beam ring] to [Disable]
(=
167).
Setting Lens Electronic MF
With USM and STM lenses equipped with electronic manual focusing
function, you can set whether to use electronic manual focusing in
One-Shot AF mode. The default setting is [Disable after One-Shot AF].
1
Select [Lens electronic MF].
 Under the [z] tab, select [Lens
electronic MF], then press <0>.
2
Set the desired setting.
 Select the setting, then press <0>.
 Disable after One-Shot AF
Manual focus adjustment after the AF operation is disabled.
 Enable after One-Shot AF
You can manually adjust the focus after the AF operation if you keep
holding down the shutter button halfway.