User manual

176
E-TTL II Flash Metering
For normal ash exposures, set it to
[Evaluative]. If [Average] is set, the ash
exposure will be averaged for the entire
metered scene. Depending on the scene,
ash exposure compensation may be
necessary. This setting is for advanced
users.
Slow Synchro
You can set the ash-sync speed for ash
photography in <f> or <d> mode.
 [
] 1/200-30sec. auto
The ash sync speed is set automatically within a range of 1/200 sec.
to 30 sec. to suit the scene’s brightness. Slow-sync shooting is used
under some shooting conditions, in low-light locations, and shutter
speed is automatically lowered.
 [
] 1/200-1/60sec. auto
Prevents a slow shutter speed from being set in low-light conditions.
It is effective for preventing subject blur and camera shake. However,
while the subject will be properly exposed with the ash, the
background may come out dark.
 [
] 1/200 sec. (xed)
The ash sync speed is xed at 1/200 sec. This more effectively
prevents subject blur and camera shake than with [1/200-1/60sec.
auto]. However, in low light, the subject’s background will come out
darker than with [1/200-1/60sec. auto].
 To use slow-sync shooting, set to [1/200-30sec. auto].
 High-speed sync is not available in <f> or <d> mode when set to [1/200
sec. (xed)].
N
N