User manual

208
Shooting with the Touch Shutter
Just by tapping on the LCD monitor screen, you can focus and take the
picture automatically.
1
Enable the Touch Shutter.
 Tap [y].
Each time you tap on the icon, it will
toggle between [y] and [x].
 [x] (Touch Shutter: Enable)
The camera will focus on the spot you
tap on, then the picture will be taken.
 [y] (Touch Shutter: Disable)
You can tap on a spot to perform
focusing on the spot (Touch AF). Press
the shutter button completely to take the
picture.
2
Tap on the screen to shoot.
 Tap on the face or subject on the
screen.
B On the point you tap, the camera will
focus (Touch AF) with the AF method
that was set (=
197).
B When focus is achieved, the AF point
turns green and the picture is taken
automatically.
 If focus is not achieved, the AF point
turns orange and the picture cannot be
taken. Tap on the face or subject on the
screen again.
 Even if you set the drive mode to <i>, the camera will still shoot in the
single shooting mode.
 Even if [AF operation] is set to [Servo AF], tapping on the screen will focus
on the image with [One-Shot AF].
 Tapping on the screen in magnied view will not focus or take the picture.
 If the Fish-eye effect Creative lter is set, the camera will focus using the AF
point at the center of the screen regardless of the point you tap on.
 If the Miniature effect Creative lter is set, the Touch Shutter does not work.