User manual

252
 In Basic Zone modes, the settings available for [z: Sound recording]
will be [On]/[Off]. If [On] is set, the sound-recording level will be adjusted
automatically (same as with [Auto]), and the wind lter function will take
effect.
 The sound volume balance between L (left) and R (right) cannot be adjusted.
 For both L and R, audio is recorded at a 48 kHz/16-bit sampling rate.
 Movie digital IS (= 232)
Enables you to reduce camera shake as movies are recorded.
 Lens aberration correctionN (=
141)
You can set peripheral illumination correction and chromatic aberration
correction.
 Time-lapse movie (=
238)
You can shoot time-lapse movies.
 Remote control
When [Enable] is set, you can start or stop movie shooting using
Wireless Remote Control BR-E1 (sold separately, =
463).
If you are using the BR-E1, set the release mode/movie shooting switch
to the <k> position, then press the release button.
 Video snapshot (=
245)
You can shoot video snapshots.
 k ISO speed settingsN (=
255)
Set the ISO speed and ISO speed range for movies.
 k Auto slow shutterN (=
255)
When recording movies under somewhat low light, you can choose
whether to give priority to brightness or smoothness.
 Metering timerN
You can change how long the exposure setting is displayed (AE lock
time).
 HDMI info dispN (=
256)
You can hide information overlay during HDMI output.
 AF method
The AF methods are the same as described on “Focusing with AF”
(=
197). You can select [u+Tracking], [Spot AF], [1-point AF], or
[Zone AF].