User manual
312
Specifying the Range of Images to be Erased
You can specify the range of images to erase all the images in the range at
once.
1
Select [Select range].
Select [Select range] in [3: Erase
images], then press <0>.
2
Specify the range of images.
Select the rst image (start point), then
press <0>.
Select the last image (end point), then
press <0>.
B The [X] icon will appear on the selected
images.
To cancel the selection, repeat this step.
To return to the previous screen, press
the <M> button.
3
Erase the images.
Press the <M> button.
Select [OK] on the conrmation dialog,
then press <0>.
B The selected images will be erased.
Erasing All Images in a Folder or on a Card
You can erase all the images in a folder or on a card at once. When
[3: Erase images] is set to [All images in folder] or [All images on
card], all the images in the folder or on the card will be erased.
To erase all images including protected images, format the card (=
66).