User manual

39
4
Remove the card.
 Gently push in the card, then let go to
eject it.
 Pull the card straight out.
5
Close the cover.
 Press the cover until it snaps shut.
 When the access lamp is lit or blinking, it indicates that images are
being written to, read from, or erased from the card, or data is being
transferred. Do not open the card slot/battery compartment cover.
Also, never do any of the following while the access lamp is lit or
blinking. Otherwise, it can damage the image data, card, or camera.
- Removing the card.
- Removing the battery.
- Shaking or banging the camera around.
- Unplugging and connecting a power cord (when household power outlet
accessories (sold separately, =
461) are used).
 If the card already contains recorded images, the image le number may not
start from 0001 (=
265).
 If a card-related error message is displayed on the LCD monitor, remove and
reinsert the card. If the error persists, use a different card.
If you can transfer images on the card to a computer, transfer all the images
and then format the card with the camera (=
66). The card may then
return to normal.
 Do not touch the card’s contacts with your ngers or metal objects. Do not
expose the contacts to dust or water. If smudges adhere to the contacts,
contact failure may result.
 Multimedia cards (MMC) cannot be used. (Card error will be displayed.)