User manual

431
22: No response from DNS server
What to check on the camera
 On the camera, does the DNS server’s IP address setting match the
server’s actual address?
B Set the IP address to [Manual setting]. Then, on the camera, set
the IP address that matches the address of the DNS server used
(=
408, = 442).
What to check on the DNS server
 Is the power of the DNS server on?
B Turn on the DNS server.
 Are the DNS server settings for IP addresses and the corresponding
names correct?
B On the DNS server, make sure IP addresses and the corresponding
names are entered correctly.
 Is the DNS server working correctly?
B Check the DNS server settings to make sure it is working correctly
as a DNS server.
B If applicable, ask your network administrator to ensure the DNS
server is available.
What to check on the network as a whole
 Does the network that you are trying to connect to via Wi-Fi include a
router or similar device that serves as a gateway?
B If applicable, ask your network administrator for the network gateway
address and enter it on the camera (=
408, = 442).
B Make sure that the gateway address setting is correctly entered on
all network devices including the camera.