C Y P O Basic Instruction Manual This basic manual covers only the most basic operations. For other features and more details, see the Camera Instruction Manual pdf file in the CD-ROM.
Introduction The EOS REBEL T5/EOS 1200D is a high-performance, digital singlelens reflex camera featuring a fine-detail CMOS sensor with approx. 18.0 effective megapixels, DIGIC 4, high-precision and high-speed 9-point AF, approx. 3.0 fps continuous shooting, Live View shooting, and Full High-Definition (Full HD) movie shooting. The camera is highly responsive to any shooting situation, and provides many features for demanding shots.
Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. Battery Pack LP-E10 (with protective cover) Camera Battery Charger LC-E10/LC-E10E* (with eyecup and body cap) Wide Strap C Y P O Interface Cable * Battery Charger LC-E10 or LC-E10E is provided. (The LC-E10E comes with a power cord.) The Instruction Manual and CD-ROMs provided are listed on the next page.
Instruction Manual and CD-ROMs The instruction manual consists of a booklet and PDF manuals in electronic form (provided on the CD-ROM disc). The booklet is the Basic Instruction Manual. For more detailed instructions, see the Camera Instruction Manual on the CD-ROM disc.
Compatible Cards The camera can use the following cards regardless of capacity: If the card is new or was previously formatted by another camera or computer, it is recommended that you format the card with this camera (p.42). • SD memory cards • SDHC memory cards • SDXC memory cards The camera can use UHS-I cards, but since it is not compatible with the UHS-I standard, reading/writing speeds will be equivalent to SD Speed Class 10 at most.
Quick Start Guide 1 Insert the battery (p.24). 2 Insert a card (p.24). 3 4 5 6 To charge the battery, see page 22. With the card’s label facing toward the back of the camera, insert it into the card slot. White index Red index Y P O Attach the lens (p.32). C Align the lens’s white or red index with the camera’s index in the matching color. Set the lens’s focus mode switch to (p.32). Set the power switch to <1> (p.27).
Quick Start Guide 6 Set the Mode Dial to (Scene Intelligent Auto) (p.48). 7 Focus on the subject (p.37). 8 9 All the necessary camera settings will be set automatically. Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus on the subject. If necessary, the built-in flash will be raised automatically. C Y P O Take the picture (p.37). Press the shutter button completely to take the picture. Review the picture.
Conventions Used in this Manual Icons in this Manual <6> : Indicates the Main Dial. : Indicates the cross keys on the top, bottom, left, and right. <0> : Indicates the Setting button. 0, 9, 7, 8 : Indicates that the corresponding function remains active for 4 sec., 6 sec., 10 sec., or 16 sec. respectively after you let go of the button.
Contents Introduction 2 Item Check List .................................................................................3 Instruction Manual and CD-ROMs ....................................................4 Compatible Cards .............................................................................5 Quick Start Guide.............................................................................. 6 Conventions Used in this Manual .....................................................8 Handling Precautions.
Contents 2 Basic Shooting and Image Playback 47 A Fully Automatic Shooting (Scene Intelligent Auto) ................... 48 A Full Auto Techniques (Scene Intelligent Auto) ......................... 51 7 Disabling Flash......................................................................... 53 C Creative Auto Shooting ............................................................ 54 2 Shooting Portraits...................................................................... 57 3 Shooting Landscapes..........
Contents 5 Image Playback 83 x Searching for Images Quickly ...................................................84 u/y Magnified View ..................................................................... 85 k Playing Movies.......................................................................... 86 L Erasing Images ..........................................................................
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult the nearest Canon Service Center. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Handling Precautions If the camera has not been used for an extended period, test all its functions before using it. If you have not used the camera for some time or if there is an important shoot such as a foreign trip coming up, have the camera checked by your Canon dealer or check the camera yourself and make sure it is working properly. If you use continuous shooting, Live View shooting, or movie shooting for a prolonged period, the camera may become hot. This is not a malfunction.
Nomenclature Mode Dial (p.18) Built-in flash/AF-assist beam Power switch (p.27) EF Lens mount index (p.32) Flash button EF-S Lens mount index (p.32) Flash sync contacts <6> Main Dial Hot shoe Microphone (p.78) Shutter button (p.37) Focal plane mark (p.59) Speaker (p.86) Red-eye reduction/ Self-timer lamp Grip Mirror C Y P O Terminal cover Contacts (p.13) Lens release button (p.33) Lens mount Lens lock pin Remote control terminal Digital terminal Body cap (p.
Nomenclature Live View shooting/ Movie shooting button (p.68/78) Display button (p.44, 65, 70, 79) Dioptric adjustment knob (p.36) AE lock/ FE lock button/Index/ Reduce button (p.84/85) Eyecup Viewfinder eyepiece AF point selection button/ Magnify button (p.85) LCD monitor (p.40) Aperture/ Exposure compensation button/ Erase button (p.88) C Y P O Quick Control button (p.38) DC cord hole Card slot/Battery compartment cover (p.
Nomenclature Shooting Settings (in Creative Zone modes, p.18) c Main Dial pointer Shutter speed Aperture Shooting mode Auto Lighting Optimizer Exposure level indicator Exposure compensation amount AEB range ISO speed Highlight tone priority y Flash exposure compensation 0 External flash exposure compensation Picture Style AF operation X: One-Shot AF 9: AI Focus AF Z: AI Servo AF MF: Manual Focusing Quick Control icon (p.38, 63) Battery check (p.
Nomenclature Viewfinder Information AF point activation indicator <•> Focusing screen AF points ISO speed AE lock/ AEB in-progress Flash-ready Improper FE lock warning C Y P O White balance correction Focus confirmation light Max.
Nomenclature Mode Dial The Mode Dial includes the Basic Zone modes, Creative Zone modes, and the Movie shooting mode. Creative Zone Modes These modes give you more control for shooting various subjects. d : Program AE s : Shutter-priority AE f : Aperture-priority AE a : Manual exposure Basic Zone Modes C Y P O All you do is press the shutter button. The camera sets everything to suit the subject or scene. A : Scene Intelligent Auto (p.48) 7 : Flash Off (p.53) C : Creative Auto (p.
Nomenclature Lens Lens without a distance scale Focusing ring Focus mode switch (p.32) Zoom ring (p.33) Zoom position index Hood mount (p.34) Filter thread (front of lens) Y P O Image Stabilizer switch (p.35) Contacts (p.13) Lens mount index (p.
Nomenclature Battery Charger LC-E10 Charger for Battery Pack LP-E10 (p.22). Power plug Charge lamp Full-charge lamp Battery pack slot Y P O IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed. C Battery Charger LC-E10E Charger for Battery Pack LP-E10 (p.22).
1 Getting Started Y P O This chapter explains preparatory steps before you start shooting and basic camera operations. C Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle. The eyepiece cover is also attached to the strap.
Charging the Battery 1 Remove the protective cover. Detach the protective cover provided with the battery. the battery. 2 Attach As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. LC-E10 the battery. 3 Recharge For LC-E10 Y P O As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Charging the Battery Tips for Using the Battery and Charger Upon purchase, the battery is not fully charged. Charge the battery before use. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity. After recharging the battery, detach it and disconnect the charger from the power outlet. When not using the camera, remove the battery.
Installing and Removing the Battery and Card Load a fully charged Battery Pack LP-E10 into the camera. The camera can use an SD, SDHC, or SDXC memory card (sold separately). The captured images are recorded onto the card. Make sure the card’s write-protect switch is set upward to enable writing/erasing. Installing the Battery and Card 1 Open the cover. Slide the lever as shown by the arrows and open the cover. the battery. 2 Insert Insert the end with the battery Y P O contacts.
Installing and Removing the Battery and Card After opening the card slot/battery compartment cover, be careful not to swing it back further. Otherwise, the hinge may break. The number of possible shots depends on the remaining capacity of the card, image-recording quality, ISO speed, etc. Setting [z1: Release shutter without card] to [Disable] will prevent you from forgetting to insert a card. Removing the Battery and Card the power switch to <2> 1 Set (p.27). the cover.
Installing and Removing the Battery and Card When the access lamp is lit or blinking, it indicates that images are being written to or read by the card, being erased, or data is being transferred. Do not open the card slot/battery compartment cover. Also, never do any of the following while the access lamp is lit or blinking. Otherwise, it can damage the image data, card, or camera. • Removing the card. • Removing the battery. • Shaking or banging the camera around.
Turning on the Power If you turn on the power and the date/time/zone setting screen appears, see page 29 to set the date/time/zone. <1> : The camera turns on. <2> : The camera is turned off and does not operate. Set to this position when not using the camera. 3 Auto Power Off To save battery power, the camera turns off automatically after approx. 30 seconds of non-operation. To turn on the camera again, just press the shutter button halfway (p.37).
Turning on the Power z Checking the Battery Level When the power is turned on, the battery level will be indicated in one of the four levels. z : Battery level is sufficient. x : Battery level is low, but the camera can still be used. c : Battery will be exhausted soon. (Blinks) n : Recharge the battery. Number of Possible Shots Y P O (Approx.
3 Setting the Date, Time, and Zone When you turn on the power for the first time or if the date/time/zone have been reset, the date/time/zone setting screen will appear. Follow the steps below to set the time zone first. If you set the camera to the correct time zone for where you currently live, when you travel to another time zone you can simply set the camera to the correct time zone for your destination to adjust the camera’s date/time automatically.
3 Setting the Date, Time, and Zone the date and time. 4 SetPress the keys to select the number. Press <0> so is displayed. Press the keys to set the number, then press <0>. (Returns to .) saving time. 5 SetSettheit ifdaylight necessary. Press the keys to select [Y]. Press <0> so is displayed. Press the keys to select [Z], then press <0>. When the daylight saving time is set to [Z], the time set in step 4 will advance by 1 hour.
3 Selecting the Interface Language 1 Display the menu screen. Press the button to display the menu screen. the [52] tab, select 2 Under [LanguageK]. Press the keys to select the [52] tab. Press the keys to select [LanguageK], then press <0>. C3 Y P O Set the desired language. Press the cross keys to select the language, then press <0>. X The interface language will change.
Attaching and Detaching a Lens The camera is compatible with all Canon EF and EF-S lenses. The camera cannot be used with EF-M lenses. Attaching a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. the lens. 2 Attach Align the lens’s red or white index White index with the camera’s index matching the same color. Turn the lens as shown by the arrow until it clicks in place. Red index C Y P O the lens’s focus mode switch 3 Set to .
Attaching and Detaching a Lens Zooming To zoom, turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrows. C Y P O Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. Do not look at the sun directly through any lens. Doing so may cause loss of vision.
Attaching and Detaching a Lens Attaching a Lens Hood A lens hood can block unwanted light and diminish rain, snow, dust etc. adhering to the front of the lens. Before storing the lens in a bag, etc., you can attach the hood in reverse. If there is no index mark on the lens and hood: Attach the lens hood. Turn the hood as shown by the arrow to attach it securely. If there is an index mark on the lens and hood: 1 Align the red dots on the hood and lens edges, then turn the hood as shown by the arrow.
Lens Image Stabilizer When you use an Image Stabilizer (IS) lens, camera shake is corrected to obtain a sharper shot. The procedure explained here is based on the EF-S18-55mm f/3.5-5.6 IS II lens as an example. * IS stands for Image Stabilizer. 1 Set the IS switch to <1>. Set also the camera’s power switch to <1>. the shutter button halfway. 2 Press X The Image Stabilizer will operate. the picture.
Basic Operation Adjusting the Viewfinder Sharpness Turn the dioptric adjustment knob. Turn the knob left or right so that the AF points (nine boxes) in the viewfinder look sharp. If the camera dioptric adjustment still cannot provide a sharp viewfinder image, using E-series Dioptric Adjustment Lenses (sold separately) is recommended. Holding the Camera Y P O To obtain sharp images, hold the camera still to minimize camera shake. C Horizontal shooting Vertical shooting 1.
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder (0). While you press the shutter button halfway, the LCD monitor will turn off.
Q Quick Control for Shooting Functions You can directly select and set the shooting functions displayed on the LCD monitor. This is called the Quick Control. 1 Press the button. X The Quick Control screen will appear (7). the desired function. 2 SetPress the cross keys to select a function. X The selected function and Feature guide (p.45) will appear. Turn the <6> dial to change the setting. Basic Zone Modes Y P O Creative Zone Modes C the picture.
Q Quick Control for Shooting Functions Sample Quick Control Screen Aperture Shutter speed Highlight tone priority* Shooting mode* (p.18) ISO speed Exposure compensation/ AEB setting Flash exposure compensation Raise built-in flash Image-recording quality Picture Style AF operation White balance Auto Lighting Optimizer Drive/self-timer Y P O Metering mode * These functions cannot be set with the Quick Control screen. When you select and press <0>, the built-in flash will pop-up.
3 Menu Operations You can set various settings with the menus such as the imagerecording quality, date/time, etc. <0> button cross keys LCD monitor button Menu Screen The menu tabs and items displayed will differ depending on the shooting mode.
3 Menu Operations Menu Setting Procedure 1 Display the menu screen. Press the button to display the menu screen. a tab. 2 Select Press the keys to select a tab (group of functions). For example, in this manual, “the [z3] tab” refers to the screen displayed when the third z (Shooting) tab from the left [ ] is selected. the desired item. 3 Select Press the keys to select Y P 4O C the option, then press <0>. Select the setting.
3 Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with the camera. When the card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc., before formatting the card. 1 Select [Format card]. Under the [51] tab, select [Format card], then press <0>. Y P O the card.
3 Formatting the Card Execute [Format card] in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full with images or data. A card-related error is displayed. Low-level Formatting Perform low-level formatting if the card’s recording or reading speed seems slow or if you want to totally erase data in the card. Since low-level formatting will format all recordable sectors in the card, the formatting will take slightly longer than normal formatting.
Switching the LCD Monitor Display The LCD monitor can display the shooting settings screen, menu screen, captured images, etc. Shooting Settings When you turn on the power, the shooting settings will be displayed. When you press the shutter button halfway, the display will turn off. And when you let go of the shutter button, the display will turn on. You can also turn off the display by pressing the button. Press the button again to turn on the display.
Feature Guide The Feature guide appears when you change the shooting mode or set a shooting function, Live View shooting, movie shooting, or Quick Control for playback, and displays a brief description of that mode, function or option. It also displays a description when you select a function or option on the Quick Control screen. The Feature guide turns off when you further proceed with any operation.
C Y P O
2 Basic Shooting and Image Playback Y P O This chapter explains how to use the Basic Zone modes on the Mode Dial for best results and how to play back images. C With Basic Zone modes, all you do is point and shoot while the camera sets everything automatically (p.64). Also, to prevent botched pictures due to mistaken operations, advanced shooting function settings cannot be changed.
A Fully Automatic Shooting (Scene Intelligent Auto) is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It also adjusts focus automatically by detecting whether the subject is still or moving (p.51). 1 AF point Set the Mode Dial to . any AF point over the 2 Aim subject. All the AF points will be used to focus, and generally the closest object will be focused. Aiming the center AF point over the subject will make focusing easier.
A Fully Automatic Shooting (Scene Intelligent Auto) the picture. 4 TakePress the shutter button completely to take the picture. X The captured image will be displayed for 2 sec. on the LCD monitor. After you finish shooting, push down the built-in flash with your fingers. The mode makes the colors look more impressive in nature, outdoor, and sunset scenes. If the desired color tone is not obtained, use a Creative Zone mode and select a Picture Style other than and shoot.
A Fully Automatic Shooting (Scene Intelligent Auto) The flash fired even though it was daylight. For a backlit subject, the flash may fire to help lighten the subject’s dark areas. If you do not want the flash to fire, use the Flash off mode (p.53). Other than the flash setting, the camera will shoot with the same settings as with . The flash fired and the picture came out extremely bright. Move further away from the subject and shoot.
A Full Auto Techniques (Scene Intelligent Auto) Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the mode, while you press the shutter button halfway to focus on a still subject, the focus will be locked. You can then recompose the shot and press the shutter button completely to take the picture. This is called “focus lock”. Focus lock is also possible in other Basic Zone modes (except <5>).
A Full Auto Techniques (Scene Intelligent Auto) A Live View Shooting You can shoot while viewing the image on the LCD monitor. This is called “Live View shooting”. For details, see page 67. 1 Display the Live View image on the LCD monitor. Press the button. X The Live View image will appear on the LCD monitor. on the subject. 2 Focus Aim the center AF point < > on the subject. Press the shutter button halfway to focus.
7 Disabling Flash The camera analyzes the scene and sets the optimum settings automatically. In places where flash photography is prohibited such as in a museum or an aquarium, use the <7> (Flash Off) mode. This mode is also effective for capturing the particular ambience of a scene, such as candlelight scenes. Shooting Tips C Y P O Prevent camera shake if the numeric display in the viewfinder blinks. Under low light when camera shake is prone to occur, the viewfinder’s shutter speed display will blink.
C Creative Auto Shooting In the mode, you can easily change the depth of field, drive/selftimer, and flash firing. You can also choose the ambience you want to convey in your images. The default settings are the same as the mode. * CA stands for Creative Auto. 1 Set the Mode Dial to . the button. (7) 2 Press X The Quick Control screen will appear. Y P O the desired function. 3 SetPress the cross keys to select a C function. X The selected function and Feature guide (p.
C Creative Auto Shooting (1) Shutter speed Aperture ISO speed (2) (4) (3) Battery check Possible shots Image-recording quality Pressing the button enables you to set the following: Y P O (1) Ambience-based shots You can set the ambience you want to convey in your images. Press the keys or turn the <6> dial to select the desired ambience. You can also select it from a list by pressing <0>.
C Creative Auto Shooting (3) Drive/self-timer: Press <0> and set it with or the <6> dial. Single shooting : Shoot one image at a time. Continuous shooting: While you hold down the shutter button completely, shots will be taken continuously. You can shoot up to approx. 3 shots per second. Self-timer: 10 sec :The picture is taken 10 seconds after you press the shutter button.
2 Shooting Portraits The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. Shooting Tips C Y P O The further the distance between the subject and background, the better. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background. Use a telephoto lens.
3 Shooting Landscapes Use the <3> (Landscape) mode for wide scenery or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips C Y P O With a zoom lens, use the wide-angle end. When using the wide-angle end of a zoom lens, objects near and far will be in focus. It also adds breadth to landscapes. Shooting night scenes. Since the built-in flash will be disabled, this mode <3> is also good for night scenes.
4 Shooting Close-ups When you want to shoot flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips C Y P O Use a simple background. A simple background makes small objects such as flowers stand out better. Move as close as possible to the subject. Check the lens for its minimum focusing distance. Some lenses have indications such as <40.25m/0.8ft> on them.
5 Shooting Moving Subjects Use the <5> (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. Shooting Tips C Y P O Use a telephoto lens. The use of a telephoto lens is recommended for shooting from a distance. Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to autofocus. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus confirmation light will blink.
6 Shooting Night Portraits To shoot people at night and obtain a natural-looking night scene in the background, use the <6> (Night Portrait) mode. Using a tripod is recommended. Shooting Tips C Y P O Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, use a tripod to prevent camera shake. Check the subject’s brightness. Under low light, the built-in flash will fire automatically to obtain a good exposure of the subject.
6 Shooting Night Portraits During Live View shooting, it may be difficult to focus on dots of light such as in a night scene. In such a case, it is recommended that you set the AF method to [Quick mode] and shoot. If it is still difficult to focus, set the lens’s focus mode switch to and focus manually. Tell the subject to keep still even after the flash fires. If you use the self-timer together with flash, the self-timer lamp will light up briefly after the picture is taken.
Q Quick Control In Basic Zone modes when the shooting function settings screen is displayed, you can press the button to display the Quick Control screen. The table on the next page shows the functions that can be set with the Quick Control screen in each Basic Zone mode. Example: Portrait mode the Mode Dial to a Basic Zone 1 Set mode. the button. (7) 2 Press X The Quick Control screen will appear. Y P O the functions. 3 SetPress the keys to select a C function.
Q Quick Control Settable Functions in Basic Zone Modes o: Set automatically k: User selectable Function u: Single shooting Drive mode 7 C 2 3 4 5 6 (p.48) (p.53) (p.54) (p.57) (p.58) (p.59) (p.60) (p.61) k k k k k i: Continuous shooting j: 10 sec.
x Image Playback The easiest way to play back images is explained below. 1 Play back the image. Press the button. X The last captured image or last image played back will appear. an image. 2 Select To view images starting with the last captured image, press the key. To view images starting with the first (oldest) image, press the key. Each time you press the button, the display format will change.
C Y P O
3 Shooting with the LCD Monitor (Live View Shooting) Y P O You can shoot while viewing the picture on the camera’s LCD monitor. This is called “Live View shooting”. C Live View shooting is effective for still subjects which do not move. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images. Using a tripod is recommended. Remote Live View Shooting With EOS Utility (EOS software, p.
A Shooting with the LCD Monitor 1 Display the Live View image. Press the button. X The Live View image will appear on the LCD monitor. The Live View image will closely reflect the brightness level of the actual image you capture. on the subject. 2 Focus When you press the shutter button halfway, the camera will focus with the current AF method (p.71). Y P O the picture. 3 TakePress the shutter button completely.
A Shooting with the LCD Monitor Enabling Live View Shooting Set [Live View shoot.] to [Enable]. In Basic Zone modes, the Live View menu options will be displayed under [z2], and in Creative Zone modes, they will be displayed under [z4]. Number of Possible Shots with Live View Shooting (Approx.
A Shooting with the LCD Monitor Information Display Each time you press the button, the information display will change.
Using AF to Focus (AF Method) Selecting the AF Method You can select an AF method to suit the shooting conditions and your subject. The following AF methods are provided: [FlexiZone - Single], [uLive mode] (face detection, p.72), and [Quick mode] (p.74). If you want to achieve precise focus, set the lens’s focus mode switch to , magnify the image, and focus manually. Select the AF method. Under the [z4] tab, select [AF method]. (In Basic Zone modes, it is under the [z2] tab.
Using AF to Focus (AF Method) on the subject. 3 Focus Aim the AF point over the subject and press the shutter button halfway. X When focus is achieved, the AF point will turn green and the beeper will sound. X If focus is not achieved, the AF point will turn orange. the picture. 4 TakeCheck the focus and exposure, then press the shutter button completely to take the picture (p.68).
Using AF to Focus (AF Method) on the subject. 3 Focus Press the shutter button halfway and the camera will focus on the face covered by the
frame. X When focus is achieved, the AF point will turn green and the beeper will sound. X If focus is not achieved, the AF point will turn orange. If a face cannot be detected, the AF point < > will be displayed and AF will be executed at the center. the picture.
Using AF to Focus (AF Method) Quick Mode:f The dedicated AF sensor is used to focus in One-Shot AF, using the same AF method as with viewfinder shooting. Although you can focus on the target subject quickly, the Live View image will be interrupted momentarily during the AF operation. You can use nine AF points to focus (automatic selection). You can also select one AF point to focus and focus only the area covered by that AF point (manual selection).
Using AF to Focus (AF Method) on the subject. 3 Focus Aim the AF point over the subject and press the shutter button halfway. X The Live View image will turn off, the reflex mirror will go back down, and AF will be executed. (No picture is taken.) X When focus is achieved, the AF point that achieved focus will turn green and the Live View image will reappear. X If focus is not achieved, the AF point will turn orange and blink. Y P O the picture.
C Y P O
4 Shooting Movies Y P O Movie shooting is enabled by setting the Mode Dial to . The movie recording format will be MOV. C For cards that can record movies, see page 5. Full HD 1080 Full HD 1080 indicates compatibility with HighDefinition featuring 1080 vertical pixels (scanning lines).
k Shooting Movies Connecting the camera to a TV set is recommended to play back the movies shot. Autoexposure Shooting 1 Set the Mode Dial to . X The reflex mirror will make a sound, then the image will appear on the LCD monitor. on the subject. 2 Focus Before shooting a movie, focus with AF or manual focus (p.71-75). When you press the shutter button halfway, the camera will focus with the current AF method. Y P O the movie.
k Shooting Movies Information Display Each time you press the button, the information display will change.
3 Setting the Movie Recording Size The menu option [Z2: Movie rec. size] enables you to select the movie’s image size [****x****] and frame rate [9] (frames recorded per second). The 9 (frame rate) switches automatically depending on the [Z2: Video system] setting. Image Size [1920x1080] (A) : Full High-Definition (Full HD) recording quality. The aspect ratio will be 16:9. [1280x720] (B) : High-Definition (HD) recording quality. The aspect ratio will be 16:9.
3 Setting the Movie Recording Size Total Movie Recording Time and File Size Per Minute Movie Recording Size Total Recording Time (approx.) 4 GB Card 8 GB Card 16 GB Card File Size (approx.) 11 min. 22 min. 44 min. 330 MB/min. 11 min. 22 min. 44 min. 330 MB/min. 46 min. 1 hr. 32 min. 3 hr. 4 min. 82.5 MB/min.
C Y P O
5 Image Playback Y P O This chapter explains basic procedures to play back images and movies. C Images shot and saved with another device The camera may not be able to properly display images captured with a different camera, edited with a computer, or that have had their file names changed.
x Searching for Images Quickly H Display Multiple Images on One Screen (Index Display) Search for images quickly with the index display showing four or nine images on one screen. 1 Play back the image. When you press the button, the last image captured will be displayed. to the index display. 2 Switch Press the button. X The 4-image index display will appear. The selected image is highlighted in an orange frame. Press the button again to switch to the 9-image display.
u/y Magnified View You can magnify a captured image by approx. 1.5x to 10x on the LCD monitor. 1 Magnify the image. Press the button during image playback. X The image will be magnified. If you hold down the button, the image will be magnified until it reaches the maximum magnification. Press the button to reduce the magnification. If you hold down the button, the magnification will be reduced to the single-image display. Magnified area position Y P O around the image.
k Playing Movies 1 Play back the image. Press the button to display an image. a movie. 2 Select Press the keys to select a movie. In the single-image display, the <1s> icon displayed on the upper left of the screen indicates a movie. If the movie is a video snapshot, [ s] will be displayed. In the index display, perforations at the left edge of a thumbnail indicate a movie. As movies cannot be played from the index display, press <0> to switch to the single-image display.
k Playing Movies Movie Playback Panel Operation Playback Description 2 Exit Returns to the single-image display. 7 Play Pressing <0> toggles between play and stop. 8 Slow motion Adjust the slow motion speed by pressing the keys. The slow-motion speed is indicated at the upper right of the screen. 5 First frame Displays the movie’s first frame. 3 Previous frame Each time you press <0>, the previous frame is displayed. If you hold down <0>, it will rewind the movie.
L Erasing Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing a 1+73 image will erase both the RAW and JPEG images. Erasing a Single Image 1 Play back the image to be erased. the button.
6 Viewing the CD-ROM Instruction Manuals / Downloading Images to Your Computer Y P O This chapter explains how to install the Camera Instruction Manual (on the CD-ROM provided) to your computer and download images from the camera to your computer, gives an overview of the software in the EOS DIGITAL Solution Disk (CD-ROM), and explains how to install the software on your computer. It also explains how to view the PDF files on the Software Instruction Manual CD-ROM.
Viewing the Camera Instruction Manual CD-ROM The Camera Instruction Manual CD-ROM contains the following electronic manuals (PDF): Camera Instruction Manual Explains all of the camera’s functions and operation procedures, including basic content. Quick Reference Guide Explains basic camera functions and procedures for shooting and playback. Viewing the Camera Instruction Manual on the CD-ROM Y P O To view the instruction manuals (PDF files), Adobe Reader 6.0 or higher must be installed in your computer.
Viewing the Camera Instruction Manual CD-ROM the START file. 3 Double-click X The screen shown in step 4 will appear. The icon displayed will differ depending on your computer’s operating system. on the manual you want to view. 4 Click Click on the name of the manual under your respective language.
Downloading Images to a Computer You can use the EOS software to download the images in the camera to your computer. There are two ways to do this. Downloading by Connecting the Camera to the Computer 1 Install the software (p.96). the provided interface cable 2 Use to connect the camera to your computer. Y P O Use the interface cable provided with the camera. Connect the cable to the camera’s digital terminal with the cable plug’s icon facing the front of the camera.
Downloading Images to a Computer Downloading Images with a Card Reader You can also use a card reader to download images to your computer. Install the software (p.96). 1 the card into the card 2 Insert reader. Y P O Canon software to download 3 Use the images. X Use Digital Photo Professional. X Use ImageBrowser EX. For details, refer to the Software Instruction Manual on the CD-ROM (p.97).
Software Overview EOS DIGITAL Solution Disk This disk contains various software for EOS DIGITAL cameras. EOS Utility With the camera connected to a computer, EOS Utility enables you to transfer still photos and movies shot with the camera to the computer. You can use this software to set various camera settings and shoot remotely with the computer connected to the camera. Also, you can copy background music tracks, such as EOS Sample Music*, to the card.
Software Overview ImageBrowser EX Connect to the Internet to download and install the software*. This software is recommended for users who mainly shoot JPEG images. You can easily view and play back still photos, MOV movies, and video snapshot albums and also print JPEG images. * EOS DIGITAL Solution Disk is necessary for downloading and installing ImageBrowser EX.
Installing the Software Do not connect the camera to your computer before you install the software. The software will not be installed correctly. When downloading and installing ImageBrowser EX, follow the steps below as with other EOS software included on the EOS DIGITAL Solution Disk. Note that Internet connection is necessary. Downloading or installing software is not possible in environments with no Internet connection.
Software Instruction Manual Contains the Software Instruction Manuals. Copying and Viewing the Instruction Manual PDFs 1 Insert the [Software INSTRUCTION MANUAL] CD-ROM into your computer. 2 Double-click the CD-ROM icon. For Windows, the icon is displayed in [(My) Computer]. For Macintosh, the icon is displayed on the desktop. 3 Copy the [English] folder to your computer. Y P O Instruction Manual PDFs with the names below are copied.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. SDXC logo is a trademark of SD-3C, LLC. HDMI, HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Use of genuine Canon accessories is recommended This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet. Do not use any home-made or modified batteries. - Do not short-circuit, disassemble, or modify the battery pack or back-up battery.
• Before storing the camera or accessory when not in use, remove the battery pack and disconnect the power plug. This is to prevent electrical shock, heat generation, and fire. • Do not use the equipment where there is flammable gas. This is to prevent an explosion or fire. • If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disassemble or modify the equipment.
Preventing Injury or Equipment Damage • Do not leave equipment inside a car under the hot sun or near a heat source. The equipment may become hot and cause skin burns. • Do not carry the camera around while it is attached to a tripod. Doing so may cause injury. Also make sure the tripod is sturdy enough to support the camera and lens. • Do not leave a lens or lens-attached camera under the sun without the lens cap attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
Digital Camera Model DS126491 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for Battery Charger LC-E10 & LC-E10E. 2. Before using the charger, read all instructions and cautionary remarks on (1) the charger, (2) the battery pack, and (3) the product using the battery pack. 3. CAUTION — To reduce risk of injury, charge only the Battery Pack LP-E10. Other types of batteries may burst, causing personal injury and other damage. 4.
MEMO C Y P O 105
MEMO C 106 Y P O
MEMO C Y P O 107
MEMO C 108 Y P O
MEMO C Y P O 109
MEMO C 110 Y P O
MEMO C Y P O 111
MEMO C 112 Y P O
MEMO C Y P O 113
MEMO C 114 Y P O
MEMO C Y P O 115
C Y P O The lenses and accessories mentioned in this Instruction Manual are current as of January 2014. For information on the camera’s compatibility with any lenses and accessories introduced after this date, contact any Canon Service Center. CPH-E103-000 © CANON INC.