Introduction Communication Software for the Camera Contents at a Glance EOS Utility Ver. 2.13 1D X REBELT4i 650D 1D C 1D Mk IV 1Ds Mk III REBELT3i 600D REBELT2i 1D Mk III 5D Mk III 5D Mk II 550D REBELT1i 6D 500D REBELXSi 7D 450D 60D REBELT3 50D 1100D 40D REBELXS REBELT5i 1000D 700D M Instruction Manual Content of this Instruction Manual C Y P O Click on arrows on the bottom right of the screen.
READ CAREFULLY BEFORE USING! Introduction CANON SOFTWARE LICENSE AGREEMENT IMPORTANT - READ THIS AGREEMENT BEFORE USING THE SOFTWARE ON THE CD-ROM IN THIS BOX. BY USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. This is a license agreement (the [Agreement]) between you and Canon Inc. ([Canon]).
Introduction Introduction EOS Utility (hereinafter EU) is software for communication with your EOS DIGITAL camera. By connecting the camera and computer with the cable provided with the camera, you can download to your computer images saved in the camera’s memory card as well as set various camera settings or shoot remotely from EU on your computer. System Requirements Main Features of EU From EU, you can control the camera remotely and perform the following main features.
Introduction Contents at a Glance Downloading images from your camera to a computer Contents at a Glance Remote shooting p.6 To shoot by controlling the camera from a computer (Remote Live View shooting) p.31 To download to a computer selected images only p.7 To shoot with accurate horizontal/vertical alignment p.47 To download images using a third-party card reader p.10 To change the aspect ratio and shoot p.
1 Downloading Images to your Computer Introduction Basic operation such as preparing for downloading images to your computer (connecting your camera and computer), starting up EU, downloading images from your camera to your computer and quitting EU are explained here. Connecting the Camera and Computer..................... 5 Starting up EU ........................................................... 6 Batch Downloading Images to Your Computer ......... 6 Downloading Selected Images to Your Computer.......
Connecting the Camera and Computer To download to your computer images shot with your camera, you will need to connect your camera and computer using the interface cable provided with the camera. Cameras other than 1D Mk IV the large plug of the cable into the USB port 1 Connect of your computer. With the < > mark on the plug facing the front of the camera, connect it to the camera’s < > terminal or terminal.
Starting up EU Batch Downloading Images to Your Computer When the camera’s power switch is set to < ON >, EU will start up, and the camera and computer will be able to communicate. You can batch download to your computer all the images saved on the memory card inserted in the camera that you have not already downloaded.
2 Introduction Check the downloaded images. Downloading Selected Images to Your Computer DPP Main window From the images saved in your camera’s memory card, you can select the ones you want and download them to your computer. 1 Click [Lets you select and download images]. Contents at a Glance 1 2 3 4 Downloading Images Camera Settings Check the downloaded images in DPP. For details on using DPP, refer to the “Digital Photo Professional Instruction Manual” (PDF electronic manual).
2 View the images and checkmark images to download. Viewer window 3 Click the [Download] button. Introduction Contents at a Glance 1 2 3 4 Downloading Images Camera Settings The [Download image] dialog box appears. Y P O 4 Specify the save destination and then click the [OK] button. Displays the save destination on the computer Download image dialog box Add check mark C You can click the [ ] button and extract images by a variety of criteria to select images to download.
Downloading and Erasing GPS Log Files from a Camera The images downloaded to your computer are displayed in the [Quick Preview] window. Introduction 6D(WG) EOS DIGITAL cameras with built-in GPS have a function for saving GPS log files. Using EU, you can download to your computer GPS log files saved in the camera's internal memory or on the camera's memory card. You can also delete GPS log files saved in the camera's memory card.
Introduction Using the Camera to Download Images to Your Computer If your camera has a direct image transfer function, you can use it to download to your computer the images saved on the memory card inserted in the camera. Refer to your camera’s Instruction Manual for details on its direct image transfer function.
Quitting EU Introduction 1 Click the [Quit] button. Contents at a Glance 1 2 3 4 Downloading Images Camera Settings The window closes and EU quits. Turn the camera’s power switch to < OFF >. 2 3 Disconnect the cable from the camera and computer. Do not pull on the cable; hold the plug and pull out.
2 Setting the Camera from Your Computer Introduction This section explains how to set the camera’s functions with EU. Setting the Camera Owner’s Name, Copyright Notice and Date/Time............................................................ 13 Available Settings by Camera Model.......................... 14 Setting up Camera Functions .................................. 15 Available Settings by Camera Model.......................... 16 Setting Picture Styles and Applying to the Camera....
Setting the Camera Owner’s Name, Copyright Notice and Date/Time You can set and apply to the camera, the camera owner’s name, copyright notice and date/time recorded as shooting information in shot images. M How to specify settings for differs from that for other cameras. For details on specifying settings for M 3 Click the [ ] button. Introduction Capture window Contents at a Glance , see p.27. 1 2 3 4 Downloading Images Connect your camera and computer, and then start up EU (p.5).
4 Introduction Click the required setting and specify each one. Available Settings by Camera Model Set-up menu 1D X Contents at a Glance 1D C 1D Mk IV 5D Mk III Setting Available settings are displayed for the camera that is connected. For more details, see “Available Settings by Camera Model”. For a list of the capture window functions, see p.99. C Y P O Owner’s name Author*1 Copyright holder (copyright notice)*1 Date/Time/Zone*2 Live View/Movie func. set.
Setting up Camera Functions Date/Time/Zone*2 You can set the camera’s date/time and the time zone where images were shot. You can retrieve the computer’s system time to sync the camera’s date and time. 1D C You can set and cancel daylight saving time on 1D X 5D Mk III 6D 7D 700D REBELT4i 650D (firmware version 2.0.0 or later) REBELT5i your camera and computer, and then start 1 Connect up EU . 2 Click [Camera settings/Remote shooting]. (p.5) .
3 Click the [ Introduction ] button. Available Settings by Camera Model 1D X 1D C Setting 1D Mk IV 1Ds Mk III 5D Mk III 5D Mk II 6D 7D 60D 50D REBELT5i 700D REBELT4i 650D REBELT3i 600D REBELT2i 550D REBELT1i 500D REBELT3 1100D 1D Mk III The [Shooting menu] appears. 4 Click the required setting and specify each one.
Introduction Picture Style Setting Picture Styles and Applying to the Camera You can set a Picture Style and apply it to the camera, in the same way as operating from the camera (p.17). Personal white balance You can register to the camera a personal white balance file (p.22). JPEG quality You can set the JPEG image quality and apply it to the camera, in the same way as operating from the camera (p.23).
2 Changing Picture Style Settings and Applying to the Camera Click the Picture Style to be set in the camera. Picture Style window You can set your own Picture Style [Sharpness], [Contrast], [Saturation] and [Color tone] and apply them to the camera, in the same way as operating from the camera. 1 Introduction Contents at a Glance 1 2 3 4 Downloading Images Click [Detail set.]. Camera Settings The setting is applied to the camera and the display returns to the [Shooting menu].
3 Applying Picture Style Files to the Camera Click the [Return] button. The settings are applied to the camera, and the display returns to the [Shooting menu]. You can register up to three Picture Style files downloaded from the Canon Web site or created with PSE and saved to your computer, as user-defined settings in your camera. 1 Click [Register User Defined style].
3 Click the [ ] button. 5 Click the [OK] button. Introduction Contents at a Glance 1 2 3 4 Downloading Images Camera Settings The Load Picture Style window appears. Y P O The Picture Style file is registered in the camera. a Picture Style file and then click the [Open] 4 Select button. C Remote Shooting Preferences Reference Index The Picture Style file is loaded. A Picture Style file is an extended function of Picture Style.
2 Saving White Balance to your Computer 1D X 1D C Select the white balance to be saved to your computer and click the [Save] button. Contents at a Glance 1D Mk IV You can save the adjustment results for an image’s white balance to your computer as a white balance file (extension “.WBD”). White balance files saved to your computer can be registered in the camera as personal white balances (p.22).
Registering Personal White Balance in the Camera 1D X 1D C 3 The white balance file is loaded. The white balance files that you can register to the camera are files with the “.WBD” extension. 1D Mk IV White balance files created by adjusting the white balance of an image and saving the results can be registered in the camera as personal white balances. 1 Click [Personal WB]. Open the folder containing the saved white balance file, select the file and then click the [Open] button.
Introduction Setting JPEG Quality and Applying to the Camera 1D X 1D C 1D Mk IV 1Ds Mk III Adjusting White Balance and Applying to the Camera You can adjust white balance, in the same way as operating from the camera. 1D Mk III You can set the JPEG image quality and apply it to the camera, in the same way as operating from the camera. 1 Click [WB SHIFT]. 1 Click [JPEG quality]. Contents at a Glance 1 2 3 4 Downloading Images Camera Settings The [JPEG Quality] window appears.
Introduction Registering Lens Aberration Correction/Peripheral Illumination Correction Data for the Lens in the Camera 1D X 1D C 1D Mk IV 5D Mk III 5D Mk II 60D 50D REBELT5i REBELT2i 550D REBELT1i 700D 500D REBELT4i 6D 7D 650D REBELT3i REBELT3 1100D [Lens aberration correction] or [Peripheral 1 Click illumin. correct.].
2 Select the lens category for which you want to register correction data. 3 Select the lens for which you want to register correction data and click the [OK] button. Introduction Contents at a Glance Register lens aberration correction data/Register peripheral illumination correction data window 1 2 3 4 Downloading Images Camera Settings A list appears showing only the selected lens category. C Y P O The correction data for the selected lens is registered in the camera.
Setting My Menu and Registering to the Camera You can register up to six frequently used menu items as My Menu and register them to the camera, in the same way as operating from the camera. You can register top layer items of each tab as well as all items of Custom Functions. Note that this function is not available for 1D C 6D REBELT5i 700D . 3 Click the [ ] button. Introduction Contents at a Glance 1 2 3 4 Downloading Images Connect your camera and computer, and then start up EU (p.5).
Specifying Settings for EOS M Camera Functions 4 Click [My Menu settings]. Introduction M My Menu M How to specify settings for is different from that of other cameras. How to connect with your computer and settings that M can be performed are explained here. M When linked to EU, the capture window does not appear as is unable to perform remote shooting and Remote Live View shooting. your camera and computer, and then start 1 Connect up EU . 2 Click [Camera settings]. (p.
3 Introduction Click the required settings and specify each one. Available Settings and How to Specify the Settings for EOS M Contents at a Glance Updating firmware Update firmware as directed by the on-screen messages. For more details on updating firmware, refer to the Canon Web site. Date/Time/Zone You can set the camera's date/time and the time zone where images were shot. You can retrieve the computer's system time to sync the camera's date and time.
Introduction Registering background music You can register WAV-format music files, saved to your computer, to the camera's memory card as background music. Registered background music can be played together with a Video Snapshot Album or slideshow played on the camera. For how to register, see instructions for step 2 and later of “Registering Background Music to a Camera Memory Card” (p.75 to p.77).
3 Remote Shooting by Controlling the Camera from Your Computer Introduction From EU you can control the camera remotely, and by viewing the subject in the EU window, you can set the camera and shoot. You can also shoot by directly operating your camera even during remote shooting, or preset a time allowing the camera to shoot automatically with timer shooting. M With , you can only register BGM in the camera's memory card. Remote Live View Shooting .....................................
Remote Live View Shooting You can control your camera remotely from EU and shoot still images from your computer screen. Also, the shot images are saved directly on your computer and you can recheck them using the linked software Digital Photo Professional (hereinafter DPP). This function is effective for shooting large numbers of shots with fixedframing such as for studio shooting. 1 2 Click [Camera settings/Remote shooting].
3 Set the camera.
4 Click the [ ] button. 5 Introduction Set the Live View function. Click [Live View/Movie func. set.], and click [Enable] in the [Live View shoot.] window that appears. Contents at a Glance 1 2 3 4 Downloading Images Camera Settings Click C Remote Shooting Y P O Preferences Live View shoot. window Reference Click Index For cameras other than 1Ds Mk III 1D Mk III The [Set-up menu] appears. REBELXSi 450D REBELXS 50D 40D 1000D , the [Live View/Movie func. set.] window appears.
Introduction Live View/Movie func. set. window 1D X 1D C Exposure simulation Exposure simulation simulates and displays the image with a brightness close to the actual resulting image. Enable The displayed image brightness will be close to the actual brightness (exposure) of the resulting image. If you set exposure compensation, the image brightness will change accordingly. Disable The image is displayed at the standard brightness to make the Live View image easy to see.
6 7D Click the [Live View shoot.] button. Introduction Contents at a Glance Select The [Remote Live View window] appears. Click Camera Settings 60D Remote Live View window Select Click REBELT5i 700D REBELT4i 650D REBELT3i 550D REBELT1i 500D REBELT3 1100D 1 2 3 4 Downloading Images 600D REBELT2i C Y P O Remote Shooting Preferences Reference Index Select [Enable] and click the [OK] button.
7 Click the [ Introduction ] button to shoot. The shot image is transferred to your computer and displayed in the [Quick Preview] window. Then, DPP starts up automatically. You can quickly review the shot image in the [Quick Preview] window displayed before DPP starts up. You can also resize the [Quick Preview] window. You can show/hide the [Quick Preview] window by clicking the [Other Functions] button in the capture widow and selecting [Quick Preview] from the menu that appears.
HDR (High Dynamic Range) Shooting 5D Mk III 6D You can shoot photos with a wide dynamic range where clipping in highlights and shadows has been reduced, and photos that appear like paintings. This is suited for scenes such as still-life and landscape. In HDR shooting, one shot is taken using three images shot with different exposures (negative exposure, standard exposure, positive exposure), and they are combined into a single image automatically. Shot HDR images are recorded in JPEG quality.
2 Introduction Take a shot. Contents at a Glance 1 2 3 4 Downloading Images Camera Settings The HDR mode cannot be set if you use any of the following functions: AEB, white balance bracketing, Multi Shot Noise Reduction, multiple exposures, flash exposure, bulb exposure, or movie shooting. HDR shooting of a moving subject is not recommended because the movement of the subject will appear as afterimages in the merged image. HDR shooting is recommended for still subjects.
Remote Live View Window Functions These pages explain the functions available in the [Remote Live View window], including checking the camera settings and focusing while viewing your subject on the computer screen. See also the list of [Remote Live View window] functions at the end of this manual (p.103, p.104). 3 Click the [ ] button. Contents at a Glance The section you selected in step 1 is displayed enlarged at 100% (actual pixel size) in the [Zoom View] window.
4 Introduction Adjust the focus. Focusing Using AF 1D X 1D C 1D Mk IV 5D Mk III 5D Mk II 6D 7D 60D 50D REBELT5i 700D REBELT4i 650D REBELT3i 600D REBELT2i 550D REBELT1i 500D REBELT3 1100D In Quick, Live, Face Detection Live, and other AF modes, images can be focused automatically in the same way as on the camera itself.
2 Select an AF point selection method from the list box. 4 Click the [ON] button. Introduction Contents at a Glance AF is executed. When focus is achieved, the camera makes a beeping sound and the AF point color changes. Selectable items differ depending on the camera settings. the AF point in the position where you want to 3 Click focus.
Focusing Using Live Mode 1D X 1D C 1D Mk IV 5D Mk III 5D Mk II 6D 7D 60D 50D REBELT5i 700D REBELT4i 650D REBELT3i 600D REBELT2i 550D REBELT1i 500D REBELT3 1100D 2 Drag the enlargement display frame to move it to the position where you want to focus. Introduction Contents at a Glance [Live mode] or [FlexiZone – Single] from the 1 Select list box. 1 2 3 4 Downloading Images Drag Camera Settings The AF point appears.
Focusing Using Face Detection Live Mode 1D X 1D C 1D Mk IV 5D Mk III 5D Mk II 6D 7D 60D 50D REBELT3i REBELT2i 550D REBELT1i 500D REBELT3 1100D 600D Focusing Using Face+Tracking REBELT5i 1 1 Select [Face Detection Live mode] from the list box. When a face is detected, an AF point appears. When there is a face other than the face detected in the scene, a new AF point appears if you move the cursor to the position of the other face. The AF point is selected by clicking that position.
Introduction Focusing Using FlexiZone-Multi REBELT5i 700D REBELT4i Checking the Depth of Field and Exposure 650D You can check the depth of field and exposure in the [Remote Live View window]. This AF mode allows focus to be easily achieved on moving subjects. You can adjust focus over a wide area, and also divide the area into zones for focusing. 1 2 Click the [ON] button. Select [FlexiZone-Multi] from the [Focus] list box. An AF point appears.
Introduction White Balance with the Remote Live View Window You can change the white balance of an image in the [Remote Live View window] and register the changed white balance in the camera. 1 Select the white balance to apply to the image.
2 Click the [ ] button. The click white balance window appears. 4 Introduction Click the [Apply to camera and execute test shooting] button. Contents at a Glance Click white balance window 1 2 3 4 Downloading Images A shot will be taken again using the part of the image in step 3 clicked as the standard for white and the shot image is displayed in the [Test shooting] window. The test image will not be saved. To save the test image, click the [ ] button.
Introduction Displaying an Electronic Level 1D X 1D C 5D Mk III Contents at a Glance 6D You can display an electronic level in the [Remote Live View window] to check the tilt of the camera. 1 Click the [ 1 2 3 4 Downloading Images ] button in the [Remote Live View window]. Camera Settings An electronic level is displayed in the [Remote Live View window]. 2 Check the tilt of the camera. Displayed contents may differ depending on the connected camera.
Introduction Changing the Aspect Ratio 1D X 1D C 1D Mk IV 1Ds Mk III 1D Mk III 5D Mk III 6D 7D 60D REBELT5i 700D REBELT4i 650D REBELT3i As with the camera’s Live View function, it is possible to shoot with a feeling similar to film-type medium-format/large-format cameras such as 6 x 6 cm, 6 x 4.5 cm and 4 x 5 inches. Depending on the connected camera, there are the following differences.
Introduction 5D Mk III 1 Click the [ Audio Recording Setting ] button. 1D X 5D Mk III 6D REBELT5i 700D REBELT4i 650D The [Specify Aspect Ratio/Cropping Info] dialog box appears. 2 1D C Set [Add aspect ratio information] or [Add cropping information]. You can set the audio recording level when shooting movies in Remote Live View shooting. This function can be set only when the camera is in P, Tv, Av, M, or B shooting mode.
2 Wind Filter Function Specify settings. From the [Sound recording] list box, select [Auto], [Manual], or [Disable] Wind filter function When you want to reduce the sound of the wind recorded while shooting outdoors, checkmark the Wind filter function box to enable the Wind filter function. It will function only when using a built-in microphone.
Overlaid Display Function An image saved in your computer can be overlaid on top of the image displayed in the [Remote Live View window]. As this function allows you to accurately align angles, it is useful when shooting several images at the same angle, such as when shooting product photos. Images loaded from your computer are only displayed, and are not included in the shot. 2 Select the image you want to display as an overlay and click the [Open] button.
Enlarging/Reducing an Overlay Image An image displayed as an overlay (the overlay image) can be enlarged/ reduced from 25 to 200%. Use the [Enlarge/Reduce] slider to set the enlargement or reduction. Drag the [Enlarge/Reduce] slider left or right. Introduction Contents at a Glance 1 2 3 4 Downloading Images Camera Settings An overlaid image (the overlay image) can be displayed enlarged/reduced, rotated, or with its composite ratio adjusted (p.53).
Rotating an Overlay Image An image displayed as an overlay (the overlay image) can be rotated from -180° to +180°. Use the [Rotate] slider to set the rotation. Drag the [Rotate] slider left or right to set. Setting the Composite Ratio of an Overlay Image The composite ratio (transparency) of an image displayed as an overlay (the overlay image) can be set from 0 to 100%. Use the [Composite Ratio] slider to set the composite ratio. Drag the [Composite Ratio] slider left or right to set.
Moving an Overlay Image Displaying a Different Overlay Image An image displayed as an overlay (the overlay image) in the [Remote Live View window] can be moved to a new position. You can also use the cursor of your mouse to enlarge/reduce or rotate the image. An image displayed as an overlay (the overlay image) can be changed to another image. 1 Click the [Open] button in [Overlay]. 1 Click the [Move overlay image] button.
Introduction Hiding an Overlay Image Displaying Grid Lines Hide an image displayed as an overlay (the overlay image). 1 Remove the check mark from [Show overlay image]. The overlay image is hidden. You can display grid lines in the [Remote Live View window] in the same way as the camera's Live View function, to check the camera's horizontal/vertical alignment. the [Compose] tab sheet and checkmark 1 Select [Show grid] in [Grid].
Shooting by Operating the Camera 2 Select a display method for the grid lines from the [Grid] list box. Even when remote shooting is set, you can still operate the camera and shoot – as when shooting with only the camera. Also, since the shot images are saved to your computer’s hard disk, you can shoot large quantities without having to worry about the capacity of the memory card. 1 Display the capture window . 2 Press the camera’s shutter button and take a shot. Introduction Contents at a Glance (p.
Shooting Movies 1D X 1D C 1D Mk IV 5D Mk III 60D REBELT5i 700D REBELT4i REBELT2i 550D REBELT1i 500D Introduction 5D Mk II 6D 7D 650D REBELT3i 600D REBELT3 1100D You can control your camera from EU and shoot movies from your computer screen. You cannot shoot movies without a memory card in your camera. 1D X 1D C 1D Mk IV 1 Prepare for Live View shooting. Follow the procedure from step 1 to step 3 for “Remote Live View Shooting” (p.31). 2 Click [Live View/Movie func. set.].
5 Introduction Click [Live View shoot.]. Contents at a Glance After you click the [Download] button, the file names of the image data shot in movie mode (movie/still image) appear in a list. The [Remote Live View window] appears. 1D C , specify audio recording settings as On 1D X needed. For specifying audio recording settings, see “Audio Recording Setting” (p.49). Camera Settings Adjust the focus (p.39, p.40). 6 7 Click the [ ] button and begin shooting.
5D Mk II 1 Introduction Click the [OK] button. Prepare for Live View shooting. 4 5 Click [Live View shoot.]. The [Live View/Movie func. set.] window closes. Follow the procedure from step 1 to step 3 for “Remote Live View Shooting” (p.31). Contents at a Glance 2 Click [Live View/Movie func. set.]. Camera Settings The [Remote Live View window] appears. 6 Adjust the focus 7 Click the [ The [Live View/Movie func. set.] window appears.
After you click the [Download] button, the file names of the image data shot in movie mode (movie/still image) appear in a list. Introduction 5D Mk III 6D 7D REBELT3 1100D 1 Prepare for Live View shooting. Follow the procedure of step 1 and step 2 for “Remote Live View Shooting” (p.31). 6D 7D , set your camera’s Live View On 5D Mk III shooting/Movie shooting switch to < >.
Introduction When setting the movie recording size, click [Live View/Movie func. set.], and display the [Live View/Movie func. set.] window before setting. The following movie compression formats can be selected on . • ALL-I (I-only): Compresses one frame at a time for recording. Although the file size will be larger than with IPB, the movie will be more suited for editing. • IPB: Compresses multiple frames at a time efficiently for recording.
Introduction 60D 1 Prepare for Live View shooting. Follow the procedure of step 1 and step 2 for “Remote Live View Shooting” (p.31). 2 Click the [ ] button. Contents at a Glance 1 2 3 4 Downloading Images Camera Settings Y P O The [Remote Live View window] appears. C After specifying [Destination Folder] and [File Name], click the [Download] button in the window, and image data will be downloaded from the camera’s memory card to your computer.
Introduction When setting the movie recording size, movie shooting mode, etc., click [Live View/Movie func. set.], and display the [Live View/ Movie func. set.] window before setting. Note the following when you set the movie recording size to [Movie Crop 640 x 480]. • The Movie crop image cannot be magnified for focusing. • Two AF modes can be selected, [Live mode] (p.42) and [Face Detection Live mode] (p.43). • AF mode automatically switches to [Live mode] (p.42) when in [Quick mode] (p.40).
Introduction REBELT5i 700D REBELT4i 650D REBELT3i 600D REBELT2i 550D 1 Prepare for Live View shooting. Follow the procedure of step 1 and step 2 for “Remote Live View Shooting” (p.31). 2 Click the [ ] button. Contents at a Glance 1 2 3 4 Downloading Images Camera Settings C After specifying [Destination Folder] and [File Name], click the [Download] button in the window, and image data will be downloaded from the camera’s memory card to your computer.
When setting the movie recording size, click [Live View/Movie func. set.], and display the [Live View/Movie func. set.] window before setting. Introduction Note the following when you set the movie recording size to [Movie Crop 640 x 480] on REBELT2i 550D . • The Movie crop image cannot be magnified for focusing. • Two AF modes can be selected, [Live mode] (p.42) and [Face Detection Live mode] (p.43). • AF mode automatically switches to [Live mode] (p.42) when in [Quick mode] (p.40).
Introduction REBELT1i 500D 1 Prepare for Live View shooting. Follow the procedure of step 1 and step 2 for “Remote Live View Shooting” (p.31). After you click the [Download] button, the file names of the image data shot in movie mode (movie/still image) appear in a list. 2 Set the camera’s Mode Dial to < C >. When setting the movie recording size, click [Live View/Movie func. set.], display the [Live View/Movie func. Set.] window before setting.
3 Introduction Click [Live View shoot]. Contents at a Glance 1 2 3 4 Downloading Images The [Remote Live View window] appears. 4 Adjust the focus 5 Click the [ (p.39, p.40). Camera Settings ] button and begin shooting. At the bottom left of the [Remote Live View window], a [ and the recording time are displayed. ] icon Recording time C Click the [ ] button again to end shooting.
Timer-controlled Shooting Two types of timer shooting are available where the camera automatically takes shots at a specified time or a specified number. Timer Shooting You can automatically take a shot when the specified time elapses. Display the capture window (p.31). 1 2 Click the [ ] button. 3 Enter a delay time and click the [Start] button. The [Timer shooting settings] dialog box appears. Enter a value between 0 seconds and 99 minutes and 59 seconds in one-second increments.
Bulb Exposures 1 Display the capture window . 2 Double-click the shooting mode icon and select [BULB]. 3 Set the desired aperture. (p.31) Introduction Contents at a Glance 1 2 3 4 Downloading Images Camera Settings C Specify the following settings for cameras other than 1D X 1D C 1D Mk IV 1Ds Mk III 1D Mk III . • For cameras with < B > (bulb) on the Mode dial, set to < B >.
Flash Shooting 1D Mk IV 5D Mk III 5D Mk II 6D 7D 650D REBELT3i 600D 4 Click the [ ] button. Introduction 1D X 1D C 60D REBELT5i 700D REBELT4i REBELT2i 550D REBELT3 1100D Contents at a Glance From EU you can set the camera’s flash functions, as well as EX-series Speedlite (sold separately) compatible with flash function setting, in order to perform flash shooting.
5 Introduction Click [Flash function settings]. Flash control menu Contents at a Glance 1 2 3 4 Downloading Images Camera Settings When REBELT5i 700D REBELT4i 650D REBELT3i 600D is connected, [Built-in flash] is also displayed. You can change the way you set the built-in flash functions by selecting setting items displayed in [Built-in flash]. Refer to your camera’s Instruction Manual for details on setting items ([NormalFiring], [EasyWireless], [CustWireless]).
Introduction 6 Specify settings. Contents at a Glance Flash function settings window The window displayed differs depending on the connected camera and flash. Check that this box is checkmarked Click setting items, and select settings from the menu that appears* Enable the wireless function, click the setting items, and then select settings from the menu that appears* [Wireless func.
Introduction 7 Click the [ If the [Flash control] menu is displayed on the camera’s LCD monitor, EU [Flash function settings] window automatically closes. You can use modeling flash by clicking the [Modeling flash] button. You should only use modeling flash for a maximum of 10 times continuously. (For more information, refer to the Instruction Manual provided with the flash.
Editing Picture Styles Using Remote Live View Function 1D C When connected to the 1D C , you can start up PSE from EU and edit Picture Style using EU’s Remote Live View function. By linking PSE with EU’s Remote Live View function, you can edit a Picture Style while viewing the editing results in real time, and adjust the image quality more efficiently while editing. 5 Follow the procedure from step 1 to step 3 for “Remote Live View Shooting” (p.31).
Registering Background Music to a Camera Memory Card 6D REBELT5i 700D REBELT4i 650D REBELT3i Register Background Music window 600D Introduction M Contents at a Glance You can register WAV-format music files, saved to your computer, to the camera’s memory card as background music. Registered background music can be played together with a Video Snapshot Album or slideshow played on the camera. 1 Connect your camera and computer, and then start EU (p.5).
Changing the Playback Order of Music Files Select a music file in [List of background music to register], and then click the [ ] or [ ] button. Editing Track Names of Music Files Select a music file in [List of background music to register], click the [Edit track Name] button and enter a track name up to 25 characters (single-byte). Then, click the [OK] button. Introduction Contents at a Glance 1 2 3 4 Downloading Images Camera Settings The order of the music files changes.
Adding EOS Sample Music Click the [EOS Sample Music] button. Music files already registered on the camera’s memory card are overwritten as music files are registered. Registering music files to your camera one track at a time is not possible. 5 Click the [Close] button. Introduction Contents at a Glance 1 2 3 4 Downloading Images Camera Settings The [Register Background Music] window closes. The EOS Sample Music on your computer is added to [List of background music to register].
Setting Web Services 6D(WG) Introduction 6D(W) How to register Web services to the camera is explained here. You can use CANON iMAGE GATEWAY to show shot images in online photo albums and use a variety of services. CANON iMAGE GATEWAY is also a site that serves as a bridge for sending images wirelessly from your camera to other Web services such as Facebook, Twitter, YouTube, and email.
4 Introduction Set Web services to use. Follow on-screen instructions to set the Web services to use. When setting of the Web services is completed, click the [Finish] button at the bottom to close the [Edit Web Services] window. The Web Service Settings dialog box appears. Contents at a Glance 5 Apply Web service settings to the camera. Select the names of the Web services you want to set in the [Web Services] list, and click the [ ] button at the center.
4 Preferences Introduction You can change each of the EU functions on each window of the preferences window to make them easier to use. Preferences ............................................................. 81 Basic Settings............................................................. 81 Destination Folder ...................................................... 81 File Name ................................................................... 82 Download Images............................................
Preferences Introduction 1 On the main window, click the [Preferences] button. the required settings and click the [OK] 2 Specify button. The [Preferences] dialog box appears. The settings are applied to EU. Basic Settings You can specify the operation when EU starts up and whether the auto power off function is enabled or disabled. C When [Show [Lets you select and download images] screen] is selected in [Startup Action], the viewer window (p.96) appears.
Introduction You can also specify a save destination folder by entering text directly in the textbox for the save destination folder. To specify a save destination folder, click the [Browse] button. After you click the [Browse] button and specify a save destination folder, a subfolder is created automatically below the save destination folder you specified.
Introduction Remote Shooting If you checkmark [Save also on the camera’s memory card], images shot during remote shooting will also be saved to the camera’s memory card. If you checkmark [In RAW+JPEG mode, only transfer JPEGs to the computer], only the JPEG image of images shot in RAW+JPEG recording quality with remote shooting will be transferred to your computer. If you checkmark [Rotate image], you can set a function that rotates shot images regardless of the camera’s position during shooting.
Introduction Linked Software Time Settings From the list box, you can select the linked software that starts up when images are downloaded from the camera or when images are shot remotely. Also, you can register third-party software as linked software by clicking the [Apply] button. You can specify settings for clock time when connected to a camera.
Reference Introduction This reference section has been provided to enhance your experience using EU. It contains various troubleshooting solutions, how to delete EU from your computer and explanations of the various windows. An index is provided at the end of the chapter for you to easily find information you are looking for. C Troubleshooting.......................................................
Troubleshooting Introduction If EU is not operating correctly, see the items below. EU and the camera are not communicating Installation could not be completed correctly You cannot install software unless you are logged into an account with Administrator privileges. Log in again into an account with Administrator privileges. For how to log in and how to specify Administrator settings, refer to the User’s Manual for the Macintosh computer or for Mac OS X.
Introduction Communication between EU and the camera disconnected Operation of the auto power off function will automatically switch the camera off, disabling communication with EU, if you turn the auto power off function to [ON]. Remove the check mark from [Auto power off] in the preferences ([Basic Settings] window) (p.81) or set the auto power off function in the camera to [OFF].
Monitor Folder Function (Function for Use with the WFT-E2, WFT-E2 II, WFT-E3, WFT-E4, WFT-E4 II, WFT-E5, WFT-E6, or WFT-E7) This is a function for checking your images with Digital Photo Professional (hereinafter DPP) in real time using the Wireless File Transmitter WFT-E2, WFT-E2 II, WFT-E3, WFT-E4, WFT-E4 II, WFTE5, WFT-E6, or WFT-E7 (sold separately). For setting the WFT-E2, WFT-E2 II, WFT-E3, WFT-E4, WFT-E4 II, WFTE5, WFT-E6, or WFT-E7 refer to the Instruction Manual provided with each product.
Function for Use with the Accessories If you have the Wireless File Transmitter WFT-E2, WFT-E2 II, WFT-E3, WFT-E4, WFT-E4 II, or WFT-E5 (sold separately), you can start up the previously mentioned accessory software from EU. And you can also start up the Picture Style Editor (Picture Style file creating software). For details on using each software, refer to the instruction manual for the software. For Picture Style files, see p.19. 3 Click the software you want to start up.
Folder Structure and File Names in the Memory Card Uninstalling the Software Images shot with the camera are saved in the memory card’s [DCIM] folder with the following folder structure and file names. Refer to the following when copying images to your computer using a card reader. Before starting the software uninstallation, quit all programs you are using. To uninstall the software, log into the account used when installation was performed.
Fixing the Plug to the Camera 1D X 1D C 1D Mk IV 1Ds Mk III Cable protector attached. 1D Mk III Fasten the plug to the camera with the cable protector to prevent it from detaching during remote shooting. 1D X 1 Introduction Contents at a Glance 1D C 3 Remove the cable protector in the order (1), (2). Check the direction of the < in. > mark on the plug and push it 2 Attach the cable protector in the order (1), (2).
1D Mk IV 1 3 Open the covers. With the plug as it is in step 2, connect it to the camera’s terminal. terminal Introduction Contents at a Glance 1 2 3 4 Downloading Images Camera Settings 2 4 Fix the cable protector with the fixing screw. Pass the small plug of the cable through the cable protector, and pull it in the direction of the arrow.
1Ds Mk III 1 1D Mk III 4 Remove the cap. Attach the cable protector and fix it with the fixing screw. Introduction Contents at a Glance Cable protector 1 2 3 4 Downloading Images Camera Settings 2 Attach the cap on the fixing screw. the small plug of the cable into the < 3 Connect terminal on your camera. > C Y P O Remote Shooting Preferences Reference Index Connect the plug with the < camera.
List of Main Window Functions The window below appears when REBELT5i REBELT3i 600D is connected. Control camera tab sheet Introduction 700D REBELT4i 650D Contents at a Glance (p.7, p.96) Camera Settings (p.31, p.99) (p.75) (p.88) (p.81) The window below appears when Quits EU (p.11) 6D is connected. 1 2 3 4 Downloading Images (p.6) Y P O The window below appears when C Remote Shooting M is connected. Preferences Reference (p.6) (p.7, p.96) Index (p.27) (p.75) (p.
Introduction Accessories tab sheet Contents at a Glance 1 2 3 4 Downloading Images (p.89) Camera Settings If you click the [Accessories] tab, you can start up from EU the software for accessories such as the Wireless File Transmitter WFTE2, WFT-E2 II, WFT-E3, WFT-E4, WFT-E4 II, or WFT-E5 (sold separately) and the Picture Style Editor (Picture Style file creating software) (p.89).
List of Viewer Window Functions (p.
List of Register Data Window Functions for Lens Aberration and Peripheral Illumination Correction (p.24) Introduction Contents at a Glance 1 2 3 4 Downloading Images Displays all the categories Lens category Camera Settings C Remote Shooting Y P O Preferences Reference Index Displays only the registered lenses Displays lenses selected in [Select a lens category] by category No. of lenses registered in the camera/No.
List of My Menu Settings Window Functions (p.
List of Capture Window Functions Introduction Displayed items differ depending on the model and settings of the camera connected. For *1 to *11 explanations, see the next page. Contents at a Glance Flash ready*2 AF mode Mirror lockup Drive mode Bracketing*10 Power status*1 Number of possible shots Warning lamp*3 Rotates shot images*4 Shoot button*5 (p.
*1 When using the battery, the charge level is displayed. 1D C 1D Mk IV 5D Mk III *2 Displayed only on 1D X 7D 600D *3 *4 *5 8 * *9 REBELT3 *11 REBELT4i 650D 1100D . The display changes as follows by double-clicking the Exposure level/ AEB level item. 50D REBELT2i REBELT5i 550D 700D REBELT1i REBELT4i 500D 650D REBELT3 Exposure level adjustment Darkest exposure 7D 60D 50D REBELT5i 700D REBELT4i REBELT3i 600D REBELT2i 550D REBELT1i 500D 1100D .
List of Flash Function Settings Window Functions (p.
Introduction Zoom/focal length MULTI flash frequency Contents at a Glance MULTI flash count Flash metering Settings update button Flash exposure compensation amount / Flash output level*2 Flash mode Syncro setting*1 Channel Master flash ON/OFF Flash exposure compensation amount / Flash output level during wireless setting*2 C Y P O Wireless function button Wireless radio ID Flash ratio 1 2 3 4 Downloading Images Camera Settings Remote Shooting Preferences Reference Index [Modeling flash] b
List of Remote Live View Window (Live View Tab) Functions (p.31) Enlargement display frame Sets the color temperature Introduction Controllers 1 Selects the white balance (p.45) Displays the [Test Shooting] window (p.106) AF mode (p.40 to p.44) Lens drive (p.40) Checks the depth of field (p.44) Movie recording time Movie recording in progress icon 1D X 1D C 5D Mk III 6D Movie compression format Frame rate Movie recording size Starts/stops movie recording Displays the capture window (p.
List of Remote Live View Window (Compose Tab) Functions (p.51) Overlay image filename Introduction Overlay image controllers Contents at a Glance Opens an overlay image (p.51) Overlay image move and display (p.54) Enlarge/reduce slider (p.52) Rotate slider (p.53) C Y P O Composite ratio slider (p.53) Resets the overlay image (p.52 to p.54) Grid display (p.55 to p.
List of Zoom View Window Functions (p.39) Moves the display position Introduction Sets the color temperature Controllers 1 Selects the white balance (p.45) Click white balance Displays the [Test Shooting] window (p.106) AF mode (p.40 to p.44) Moves the display position C Moves the display position Y P O Lens drive (p.40) Checks the depth of field (p.
List of Test Shooting Window Functions (p.45) Introduction Test shooting button Displays the [Click white balance] window (p.
Index A Adjusting the Horizontal Alignment of the Camera (Remote Live View Shooting) ............................................................. Adjusting the Vertical Alignment of the Camera (Remote Live View Shooting) ............................................................. Adjusting the White Balance ............................................................... Applying Personal White Balance....................................................... Applying Picture Style Files ....................
Remote Live View Window Functions................................................. Adjusting the Horizontal Alignment of the Camera....................... Adjusting the Vertical Alignment of the Camera........................... Changing the Aspect Ratio........................................................... Changing the White Balance in the Remote Live View Window ....... Checking the Depth of Field and Exposure.................................. Focusing Automatically (Using AF) .......................
