Basic User Manual

W-20
Connecting Automatically with the NFC Function
3
Connect to the camera.
 When a connection is established,
the screen on the left will appear on
the camera’s LCD monitor. When
connecting to the same smartphone,
this screen will not appear again.
 Select [OK] and press <0>.
 The camera’s <k> lamp will light up
in green.
 After a message is displayed, the
camera’s LCD monitor will turn off.
 The main window of Camera Connect
will be displayed on the smartphone.
4
Operate the camera using
Camera Connect.
 Perform further operations using
Camera Connect. See page W-26.
The settings for connecting to a smartphone are now complete.
The device name set
on Camera Connect
You can check or change the device name on the setting screen of Camera
Connect.