Wireless Function User Manual

76
Connecting via WPS (PBC Mode)
4
Select [Connect with WPS].
 Select [Connect with WPS] and
press <0>.
5
Select [WPS (PBC mode)].
 Select [WPS (PBC mode)] and press
<0>.
 Select [OK] and press <0> to go to
the next screen.
6
Connect to the access point.
 Press the access point’s WPS button.
For details about where the button is
located and how long to press it, refer
to the access point’s instruction
manual.
 Select [OK] and press <0> to
establish a connection with the
access point.
 When a connection with the access
point is established, the next screen
is displayed.
For [Camera access point mode] displayed in step 4, see page 88.