Wireless Function User Manual

79
This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.
 Even if there are multiple access points active in the surrounding
area, a relatively reliable connection can be established using this
shared identification number.
 It may take approx. one minute to establish a connection.
1
Select [Wi-Fi function].
 Under the [53] tab, set [Wi-Fi/NFC]
to [Enable], then select [Wi-Fi
function] (p.17).
 If a screen for setting a nickname (for
identification) appears, register a
nickname (p.14).
2
Select an item.
 Select [q] or [l], then press <0>.
 The camera’s <k> lamp will blink.
3
Select [Select a network].
 Select [Select a network] and press
<0>.
 Select [OK] and press <0> to go to
the next screen.
Connecting via WPS (PIN Mode)